HP P2055 Manual

Table 1-5  Printing
Service nameDescription
port9100 (Direct Mode)Printing service
Line printer daemon (LPD) Printing service
Table 1-6  Network product discovery
Service nameDescription
SLP (Service Location Protocol)Device Discovery Protocol,  used to help find and configure
network devices. Used primarily by Microsoft-based software
programs.
multicast Domain Name Service (mDNS—also known as
“Rendezvous” or “Bonjour”) Device Discovery Protocol, 
used to help find and configure
network devices. Used...

20 Chapter 1   Product basicsENWW 

2 Control panel
●Control panel (HP LaserJet P2050 Series Printers only)
●
Control panel (HP LaserJet P2030 Series Printers only)
ENWW 21 

Control panel (HP LaserJet P2050 Series Printers only)
Control-panel layout
Use the control panel to obtain product and job status information and to configure the product.
OK
1
7
6
5
4
3
2
8
NumberButton or lightFunction
1Control-panel displayShows status information, menus, help information, and error messages.
2 Up arrowNavigates to the next submenu or the next  value in a menu selection list, moves
the cursor forward a single position, or increases the value of numeric items
3OK  button● Saves the...

Use the control-panel menus
To gain access to the control-panel menus, complete the steps below.
Use the menus
1.Press  OK.
2. Press the down arrow 
 or the up arrow  to navigate the listings.
3. Press  OK to select the appropriate option.
4. Press the back button 
 to return to th e previous level.
NOTE:Asterisks that appear on the control panel  note that the menu item is selected.
The following are the main menus.
Main menus (Setup menu) Reports
System setup
Service
Network config. (HP LaserJet...

Reports menu
Use the Reports  menu to print reports that provide information about the product.
Menu itemDescription
Demo pagePrints a page that demonstrates print quality.
Menu structurePrints a map of the control-panel-menu la yout. Lists the active settings for each
menu.
Config reportPrints a list of all the product settings. Includes network information when the product
is connected to a network.
Supplies statusPrints the status for the print cartrid ge, including the following information: 
●...

System setup menu
Use this menu to establish basic product settings. The System setup menu has several sub-menus.
Menu itemSub-menu itemSub-menu itemDescription
Language  Select the language for the control-panel
display messages and the product reports.
Quiet mode On
OffEnable or disable quiet mode. When quiet
mode is turned on, the product prints at a
slower speed. This setting is used for heavy
media.
The default setting is  Off.
Paper setupDef. paper sizeA list of available sizes
appears.Select the...

Menu itemSub-menu itemSub-menu itemDescription
Display contrastMedium
Darker
Darkest
Lightest
Lighter Adjust the contrast of the LCD.
Courier fontRegular
Dark  
Select a version of the Courier font.
The default is  Regular.
26 Chapter 2   Control panel ENWW 

Service menu
Use this menu to restore default settings, clean the product, and activate special modes that affect print
output.
Menu itemDescription
Cleaning modeUse this option to clean the product if y ou see toner specks or other marks on the
printed output. The cleaning process removes dust and excess toner from the paper
path.
When you select this item, the product prompts you to load plain paper in Tray 1 and
then press  OK to begin the cleaning process. Wait until the process is complete.
Discard...

Network config. menu (HP LaserJet P2055dn and HP LaserJet P2055x
only)
Use this menu to establish network configuration settings.
Menu itemDescription
CFG TCP/IP Access the TCP/IP menu and set TCP/IP protocol parameters.
BOOTP=YES* Enable IPv4 configuration by a BOOTP Server.
DHCP=YES* Enable IPv4 configuration by a DHCP Server . (This item only displays on the control
panel when  BOOTP=NO* .
If  DHCP=YES*  and the print server has a DHCP lease, you can configure the following DHCP
settings:
● RELEASE
:...