HP OfficeJet Pro K850dn User Manual
Have a look at the manual HP OfficeJet Pro K850dn User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1114 HP manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
10 Regulatory information This section provides regulatory information for the printer. ENWW123
FCC statement The United States Federal Communications Commission (in 47 cfr 15.105) has specified that the following notices be brought to the attention of users of this product. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Shielded cables Use of a shielded data cable is required to comply with the Class B limits of Part 15 of the FCC Rules. Pursuant to Part 15.21 of the FCC Rules, any changes or modifications to this equipment not expressly approved by the Hewlett-Packard Company, may cause harmful interference and void the FCC authorization to operate this equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ●Reorient or relocate the receiving antenna. ●Increase the separation between the equipment and receiver. ●Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ●Consult the dealer or an experienced radio/TV technician for help. 124 Chapter 10 Regulatory information ENWW
EMI statement (Korea) ENWWEMI statement (Korea) 125
VCCI statement (Japan) 126 Chapter 10 Regulatory information ENWW
Regulatory model number For regulatory identification purposes, your product is assigned a Regulatory Model Number. The Regulatory Model Number for your product is SNPRC-0504. The regulatory number should not be confused with the product name (HP Officejet Pro K850/K850dn Color Printer) or product number (C8177A and C8178A). ENWWRegulatory model number 127
Power cord statement The power cord cannot be repaired. If it is defective, it should be discarded or returned to the supplier. 128 Chapter 10 Regulatory information ENWW
Declaration of conformity Manufacturers Name:Hewlett-Packard Singapore (Pte) Ltd Manufacturers Address:Imaging and Printing Manufacturing Operations Singapore 60 Alexandra Terrace, #07-01, The Comtech, Singapore 118502 declares, that the product Product Name: HP Officejet Pro K850/K850dn Color Printer Product Number:C8177A and C8178A Regulatory Model Number(1):SNPRC-0504 Product Accessory Number:C8258A / HP Automatic two-sided printing accessory Product Options:All Conforms to the following Product Specifications: Safety: IEC 60950:1999 / EN 60950:2000EN 60825-1:1994+A1:2002 EMC:CISPR 22:1997 / EN 55022:1998 Class B (2)(3) CISPR 24:1997 + A1 / EN 55024:1998 + A1 IEC 61000-3-2:2000 / EN 61000-3-2:2000 IEC 61000-3-3:1994 +A1 / EN 61000-3-3:1995 + A1 FCC Title 47 CFR, Part 15 Class B / VCCI-2 (2) ICES-003 Issue 4 Supplementary Information: The product herewith complies with the requirements of the Low Voltage Directive 73/23/EEC and the EMC Directive 89/336/ EEC, and carries the CE marking accordingly. (1) This product is assigned a Regulatory model number that stays with the regulatory aspects of the design. The Regulatory Model Number is the main product identifier in the regulatory documentation and test reports, this number should not be confused with the marketing name or the product numbers. (2) The product was tested in a typical configuration with Hewlett Packard personal computer systems. (3) Excepting clause 9.5 which was not applied. Singapore, 16 August 2004 Chan Kum Yew Director, Quality Local Contact for regulatory topics only: European Contact: Hewlett-Packard GmbH, HQ-TRE, Herrenberger Strasse 140, 71034 Boeblingen, Germany USA Contact: Hewlett-Packard Company, HPCC, 20555 S.H. 249 Houston, Texas, 77070 Australia Contact: Hewlett Packard Australia Ltd, Product Regulations Manager, 31-41 Joseph Street, Blackburn, Victoria 3130, Australia. ENWWDeclaration of conformity 129
Environmental sustainability program Hewlett-Packard is committed to providing quality products in an environmentally sound manner. HP continuously improves the design processes of its products to minimize the negative impact on the office environment and on the communities where products are manufactured, shipped, and used. HP has also developed processes to minimize the negative impact of the disposal of the product at the end of its printing life. For more information about the HP environmental sustainability program, see www.hp.com/hpinfo/ globalcitizenship/environment/index.html. Reduction and elimination Paper use The two-sided (duplex) printing and N-up printing features of this product (which you can use to print multiple pages of a document on one sheet of paper) can reduce paper usage and the resulting demands on natural resources. For more information about using these features, see this guide. Ink use The Draft mode of this product uses less ink, which might extend the life of the cartridges. For more information, see the printer driver onscreen Help. Ozone-depleting chemicals Ozone-depleting chemicals, such as chlorofluorocarbons (CFCs), have been eliminated from HP manufacturing processes. Power consumption This product qualifies for ENERGY STAR® (version 3.0), which is a voluntary program to encourage the development of energy-efficient office products. ENERGY STAR® and the ENERGY STAR mark are U.S. registered marks. As an ENERGY STAR® Partner, Hewlett-Packard Company has determined this product meets ENERGY STAR® guidelines for energy efficiency. For more information, see www.energystar.gov. Material safety data sheets Material safety data sheets (MSDSs) can be obtained from the following HP website: www.hp.com/ go/msds. 130 Chapter 10 Regulatory information ENWW
Recycling Design for recycling has been incorporated into this product: ●The number of materials has been kept to a minimum while ensuring proper functionality and reliability. ●Dissimilar materials have been designed to separate easily. ●Fasteners and other connections are easy to locate, gain access to, and remove by using common tools. ●High-priority parts have been designed so that you can reach them quickly for efficient disassembly and repair. Product packaging The packaging materials for this product have been selected to provide maximum protection for the least cost possible, while attempting to minimize environmental impact and facilitate recycling. The rugged design of the product assists in minimizing both packaging materials and damage rates. Plastics Plastic parts over 25 grams are marked according to international standards that enhance the ability to identify plastics for recycling purposes at the end of the products life. Disposal of waste equipment by users in private households in the European Union This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or the shop where you purchased the product. HP products and supplies HPs Planet Partners™ recycling service provides an easy way to recycle any brand of computer equipment or HP printing supplies. HPs state-of-the-art processes ensure that your unwanted hardware or HP printing supply is recycled in a way that conserves resources. For more information, see www.hp.com/recycle. ENWW Environmental sustainability program 131