HP Officejet J6413 User Manual

3.Slide the media guide in the tray to adjust it for the media size that you have
loaded, and then lower the output tray.
4.Pull out the extension on the output tray.
Print on special and custom-sized media
To print on special or custom-sized media (Windows)
1.Load the appropriate media. For more information, see 
Load media.
2.With a document open, click Print on the File menu, and then click Setup,
Properties, or Preferences.
3.Click the Paper/Features tab.
4.Select the media size from the Size is...

5.To select the media type:
a. Click More in the Type is drop-down list.
b. Click the desired media type, and then click OK.
6.Select the media source from the Source is drop-down list.
7.Change any other settings, and then click OK.
8.Print your document.
To print on special or custom-sized media (Mac OS)
1.Load the appropriate media. For more information, see 
Load media.
2.On the File menu, click Page Setup.
3.From the drop-down list, select the HP device.
4.Select the media size.
5.To set a custom...

4.Click the Paper/Quality tab.
5.Select the media size from the Size is drop-down list.
6.Select the Borderless Printing check box.
7.Select the media source from the Source is drop-down list.
8.Select the media type from the Type is drop-down list.
NOTE:Borderless printing is not supported on plain media.
9.If you are printing photos, select Best from the Print Quality drop-down list.
Alternatively, select Maximum dpi, which provides up to 4800 x 1200 optimized
dpi* for optimum print quality.
*Up to...

Set up speed-dial entries
You can set up frequently used fax numbers as speed-dial entries. This lets you dial
those numbers quickly by using the device control panel. The first five entries for each
of these destinations are associated with the five speed-dial buttons on the device
control panel.
This section contains the following topics:
•
Set up fax numbers as speed-dial entries or groups
•
Print and view a list of speed-dial entries
Set up fax numbers as speed-dial entries or groups
You can store...

A group member must be a member of the speed-dial list before you can add the
member to a speed-dial group. You can add up to 20 fax numbers to each group (with
up to 50 characters for each fax number).
•HP Photosmart Software (Windows): Open the HP Photosmart Software and
follow the instructions in the onscreen Help.
•HP Device Manager (Mac OS): Launch HP Device Manager, click Information
and Settings, and then select Fax Speed Dial Settings from the drop-down list.
•Device control panel: Press the...

Install the duplexer
You can print on both sides of a sheet of paper automatically. For information on using
the duplexer, see 
Print on both sides (duplexing).
To install the duplexer
1.If you are installing the duplexer for the first time, remove the tape and cardboard
protecting the rear of the device.
2.Slide the duplexer into the device until the unit locks into place. Do not press the
buttons on either side of the duplexer when installing the unit; use them only for
removing the unit from the...

3 Print
This section contains the following topics:
•
Change print settings
•
Print on both sides (duplexing)
•
Cancel a print job
Change print settings
You can change print settings (such as paper size or type) from an application or the
printer driver. Changes made from an application take precedence over changes
made from the printer driver. However, after the application is closed, the settings
return to the defaults configured in the driver.
NOTE:To set print settings for all print jobs, make the...

Change settings (Mac OS)
To change the settings
1.On the File menu, click Page Setup.
2.Change the settings that you want (such as paper size), and then click OK.
3.On the File menu, click Print to open the print driver.
4.Change the settings that you want (such as media type), and then click OK or Print.
Print on both sides (duplexing)
You can print on both sides of a sheet of media either manually, or automatically using
the duplexer.
NOTE:The printer driver does not support manual duplexing. Two-sided...

To print automatically on both sides of a page (Windows)
1.Load the appropriate media. For more information, see 
Guidelines for printing on
both sides of a page and Load media.
2.Make sure the duplexer is properly installed. For more information, see 
Install the
duplexer.
3.With a document open, click Print on the File menu, and then click Setup,
Properties, or Preferences.
4.Click the Features tab.
5.Select the Two-sided printing drop-down list. For auto-duplexing, ensure that
Automatic is selected....

4 Copy
You can produce high-quality color and grayscale copies on a variety of paper types
and sizes.
NOTE:Copying from the HP photo and imaging software is only available on the
Mac OS. See the softwares help for more information.
NOTE:If you are copying a document when a fax arrives, the fax is stored in the
device memory until the copying finishes. This can reduce the number of fax pages
stored in memory.
This section contains the following topics:
•
Make copies from the device control panel
•
Change...