HP M177 User Manual

							3.
Click or tap the Layout tab.  4
.
Select the appropriate duplex option from the 
Print on Both Sides Manually drop-down list, 
and then click or tap the OK button.  5
.
In the Print dialog box, click the OK button to 
print the job. The pr
oduct will print the 

						

							6.
Retrieve the printed stack from the output bin, 
and place it with the prin
ted-side facing down, 
top edge 


						

							3.
Click or tap the Layout tab.  4
.
Select the correct Orientation option from the 
drop-down list.  5
.
Select the correct number of pages per sheet 
from the Pages per sheet drop-down list, and 
then click or tap the Advanced button.  ENWW
Print tasks (Windows) 23    
						

							6.
Select the correct Pages per Sheet Layout option 
from the drop-down list.  7
.
Select the correct Page Borders option from the 
drop
-down list, click or tap the OK button to close 
the Advanced Options dialog box, and then click 
or tap the OK button to close the Properties or 
Preferences dialog box.  8
.
In the Print dialog box, click or tap the OK button 
to print the job
.  24 Chapter 3   Print
ENWW    
						

							Select the paper type (Windows)
1.
From the software program, select the Print 
option.  2
.
Select the product from the list of printers, and 
then click or tap the Properties or Preferences 
button to open the print driver. NOTE: The name of the button varies for 
di

						

							4.
From the Media: drop-down list, select the 
correct p
aper type, and then click or tap the OK 
button to close the 
Properties or Preferences 
dialog box.  5
.
In the Print dialog box, click the OK button to 
print the job.  Additional printing information
Go to  www.hp.com/ support  to visit the support Web site for this product and for details about performing 
speci

						

							Print tasks (Mac OS X)
● How to print (Mac OS X)
●
Manually print on both sides (Mac OS X)
●
Print multiple pages per sheet (Mac OS X)
●
Select the paper type (Mac OS X)
●
Additional printing information
How to print (Mac OS X)
The following procedure describes the basic printing process for Mac OS X. 1.
Click the File menu, and then click the Print option. 2.
In the 
Printer menu, select the product. 3
.
Open the menus drop-down list or click Show Details, and then select other menus to adjust the print 
settings. 4
.
Click the Print button.
Manually print on both sides (Mac OS X) NOTE: This feature is available if you install the HP print driver. It might not be available if you are using 
AirPrint. 1
.
Click the File menu, and then click the Print option. 2.
In the 
Printer menu, select this product. 3
.
Open the menus drop-down list or click Show Details, and then click the Manual Duplex menu. 4.
Click the 
Manual Duplex box, and then select a binding option. 5
.
Click the Print button. 6
.
Go to the product, and remove any blank paper that is in the input tray. ENWW
Print tasks (Mac OS X) 27  
						

							7.
Retrieve the printed stack from the output bin and place it with the printed-side facing down, top edge 


						

							●
Create and use printing shortcuts or presets
●
Select the paper size, or use a custom paper size
●
Select the page orientation
●
Create a booklet
●
Scale a document to 

						

							Web-based printing
Several options are available for remote printing over the Internet.
HP ePrint Use HP ePrint to print documents by sending them as an email attachment to the product's email address 
from any email en
abled device.
To use HP ePrint, the product must meet these requirements: ●
The product must be connected to a wired or wireless network and have Internet access.
●
HP Web Services must be enabled on the product, and the product must be registered with HP 
Connected.
LCD c

ontrol panel 1
. Find the product IP address.
a
. On the product control panel, press the Setup   button.
b. Open the following menus:
●
Network Setup
●
Show IP Address
2. To open the HP Embedded Web Server, enter the product IP address into the address line of a Web 
bro
wser on the c

omputer. 3. Click the HP Web Services tab on the HP Embedded Web Server, and then click 
Enable. The product 
en

able
s Web Services, and then prints an information page.
The information page contains the printer code that you use to register your HP product at HP 
Connected. 4. Go to  www.hpconnected.com  to create an HP ePrint account and complete the setup process.
Touchscreen control panel 1. From the Home screen on the product control panel, touch the Web Services   button.
2
. Touch the Enable Web Services button. The product enables Web Services, and then prints an 
informa
tion page.
The information page contains the printer code that you use to register your HP product at HP 
Connected. 3. Go to  www.hpconnected.com  to create an HP ePrint account and complete the setup process.
For more information, go to  www.hp.com/ support  to review additional support information for your product.
HP ePrint software The HP ePrint software makes it easy to print from a desktop or laptop computer to any HP ePrint capable 
product. Af

ter installing the software, open the Print option from within your application, and then select HP 
ePrint fr

om the installed printers list. This software makes it easy to