HP LaserJet P2035 User Manual

Print to the straight-through paper path (rear output)
The product always uses the straight-through paper path if it is open. Paper exits face-up, with the last
page on top (reverse order).
Printing from Tray 1 to the rear output provides the straightest path. Opening the straight-through paper
path might improve performance with the following paper types:
●Envelopes
● Labels
● Small custom-size paper
● Postcards
● Paper heavier than 120 g/m
2 (32 lb)
To open the straight-through paper path, grasp the...

42 Chapter 6   Paper and print mediaENWW
 

7 Use product features
●EconoMode
●
Quiet mode
ENWW 43
 

EconoMode
This product has an EconoMode option for printing drafts of documents. Using EconoMode can use
less toner and decrease the cost per page. However, using EconoMode can also reduce print quality.
HP does not recommend full-time use of EconoMode. If EconoMode is used full-time, the toner supply
might outlast the mechanical parts in the print cartridge. If print quality begins to degrade under these
circumstances, you will need to install a new print cartridge, even if there is toner supply...

Quiet mode
This product has a quiet mode that reduces noise during printing. When quiet mode is turned on, the
product prints at a slower speed.
Follow these steps to enable quiet mode.
Windows1.Open the printer-driver  Properties screen, and then click the  Device
Settings  tab. For instructions, see the third column of the table in Changeprinter-driver settings for Windows on page 14.
2. In the  Quiet Mode  area, select  Enable.
Macintosh 1.Open the HP Printer Utility. See Open the HP Printer Utility...

46 Chapter 7   Use product featuresENWW
 

8 Print tasks
●Cancel a print job
●
Use features in the Windows printer driver
ENWW 47
 

Cancel a print job
You can stop a print request by using the control panel or by using the software program. For instructions
about how to stop a print request from a computer on a network, see the online Help for the specific
network software.
NOTE:It can take some time for all printing to clear after you have canceled a print job.
Stop the current print job from the control panel
▲Press the Cancel button  on the control panel.
Stop the current print job from the software program
When you send the print...

Use features in the Windows printer driver
Open the printer driver
How do ISteps to perform
Open the printer driverOn the File menu in the software program, click  Print. Select
the printer, and then click  Properties or Preferences .
Get help for any printing option Click the ? symbol in the upper-right corner of the printer driver,
and then click any item in the printer driver. A pop-up message
displays that provides information about the item. Or, click
Help  to open the online Help.
Use Quick Sets...

Set paper and quality options
To perform the following tasks, open the printer driver and click the Paper/Quality tab.
How do ISteps to perform
Select a page sizeSelect a size from the  Size is drop-down list.
Select a custom page sizea) Click Custom . The Custom Paper Size  dialog box opens.
b) Type a name for the custom size, specify the dimensions,
and click  OK.
Select a paper sourceSelect a tray from the  Source is drop-down list.
Select a paper typeSelect a type from the  Type is drop-down list....