HP LaserJet P2035 User Manual

Supported paper and print media sizes
This product supports a number of paper sizes, and it adapts to various media.
NOTE:To obtain best results, select the correct paper size and type in the printer driver before printing.
Table 6-1   Supported paper and print media sizes
Size and dimensionsTray 1Tray 2
Letter
216 x 279 mm (8.5 x 11 inches)
Legal
216 x 356 mm (8.5 x 14 inches)
A4
210 x 297 mm (8.27 x 11.69 inches)
A5
148 x 210 mm (5.83 x 8.27 inches)
A6
105 x 148 mm (4.1 x 5.8 inches)
B5 (JIS)
182 x 257...

Size and dimensionsTray 1Tray 2
176 x 250 mm (6.7 x 9.8 inches)
Envelope C5 ISO
162 x 229 mm (6.93 x 9.84 inches) 
Envelope DL ISO
110 x 220 mm (4.33 x 8.66 inches) 
Envelope Monarch
98 x 191 mm (3.9 x 7.5 inches) 
Custom
76 x 127 mm to 216 x 356 mm
(3.0 x 5.0 inches to 8.5 x 14 inches) 
Custom paper sizes
This product supports a variety of custom paper sizes. Supported custom sizes are sizes that are within
the minimum- and maximum-size guidelines for the product but are not listed in the supported...

Supported paper and print media types
For a complete list of specific HP-brand paper that this product supports, go to www.hp.com/support/
ljp2030series.
Paper type (printer driver)Tray 1Tray 2
Plain Paper
Light 60–74 g/m2
Midweight (96–110 g/m2)
Heavy (111–130 g/m2)
Extra Heavy (131–175 g/m2) 
Transparency
Labels 
Letterhead
Preprinted
Prepunched
Color
Rough
Bond
Recycled
Envelope 
HP Multipurpose Paper
HP Office Paper
HP LaserJet Paper
HP Premium Choice Paper
ENWW Supported paper and print media types...

Tray and bin capacity
Tray or binPaper typeSpecificationsQuantity
Tray 1PaperRange:
60 g/m
2 (16 lb) bond to 200 g/m2
(54 lb) bond
Maximum stack height: 5 mm
(0.3 inch)
Equivalent to 50 sheets of 75 g/
m
2 (20 lb) bond
EnvelopesLess than 60 g/m2 (16 lb) bond to
90 g/m2 (24 lb) bond
Up to 10 envelopes
LabelsMaximum 0.23 mm (0.009 inch)
thickMaximum stack height: 5 mm
(0.3 inch)
TransparenciesMinimum 0.13 mm (0.005 inch)
thickMaximum stack height: 5 mm
(0.3 inch)
Tray 2PaperRange:
60 g/m
2 (16 lb) bond to...

Special paper or print media guidelines
This product supports printing on special media. Use the following guidelines to obtain satisfactory
results. When using special paper or print media, be sure to set the type and size in your print driver to
obtain the best print results.
CAUTION:HP LaserJet printers use fusers to bond dry toner particles to the paper in very precise
dots. HP laser paper is designed to withstand this extreme heat. Using inkjet paper not designed for this
technology could damage...

Load trays
Paper orientation for loading trays
If you are using paper that requires a specific orientation, load it according to the information in the
following table.
TraySingle-sided printingEnvelope printing 
Tray 1Face-up
Top edge leading into the productFront of envelope face-up
Short edge with postage leading into the
product
Tray 2Face-down
Top edge at the front of the trayUse only Tray 1 for printing envelopes.
36 Chapter 6   Paper and print media ENWW
 

Tray 1
Tray 1 is accessed from the front of the printer.
Media guides ensure that the media is correctly fed into the printer and that the print is not skewed
(crooked on the media). When loading media, adjust the media guides to match the width of the media
that you are using.
ENWW Load trays 37
 

Tray 2
Media guides ensure that the media feeds correctly into the printer and that the print is not skewed. Tray
2 has side and rear media guides. When loading media, adjust the media guides to match the length
and width of the media that you are using.
NOTE:When you add new media, make sure that you remove all of the media from the input tray and
straighten the stack of new media. This reduces jams by preventing multiple sheets of media from
feeding through the printer at one time.
Load A6-size paper...

Manual feed
You can use manual feed when printing mixed media. For example, you can use manual feed to print
an envelope, then a letter, then an envelope, and so on. Load envelopes in Tray 1 and load letterhead
into Tray 2.
To print using manual feed, open the printer Properties or Printer Setup, and then select Manual Feed
(tray 1)  from the  Source Tray  drop-down list. After you have enabled manual feed, press the  Go button
to print.
Configure trays
Use either the printer driver or the embedded Web...

Use paper output options 
The product has two output locations: the top (standard) output bin and the straight-through paper path
(rear output).
Print to the top (standard) output bin
The top output bin collects paper face-down, and in the correct order. The top output bin should be used
for most print jobs, including transparencies. To use the top output bin, be sure that the straight-through
paper path is closed. To avoid jams, do not open or close the straight-through paper path while the
product is...