HP LaserJet 4345x mfp User Manual

5. Adjust the left media guide by pressing the tab on the guide and sliding the guide until it
gently touches the media stack
6. Adjust the front media guide by pressing the  tab on the guide and sliding the guide until
it gently touches the media stack.
7. Look at the package for the ream of  paper. Note the value of the width (X dimension)
and the length (Y dimension). You will need this information for a later step.
8. Close the tray.
9. If the size that appears on the control panel is  CUSTOM, then...

Configuring the trays by using the Paper handling menu  
You can configure the media type and size for the input trays without a prompt on the MFP
control panel display. Use the following procedure to gain access to the PAPER HANDLING
menu and configure the trays.
To configure the media size for a tray
1. Touch  Menu.
2. Touch  PAPER HANDLING .
3. Touch  TRAY  SIZE .
4. Touch the media size that is loaded.
5. Touch  EXIT to exit the menus.
Note
Depending on the size that you selected, the  MFP might...

2
Using the control panel
The MFP control panel has a touchscreen graphical display that offers an integrated
approach to copying, e-mail, and printing.
The control panel provides you with all of the features of a standard photocopier, plus
printing and e-mail capabilities. Use the control panel to describe the features of the original
document, to specify any modifications to the scanned image, and to select the features that
you want in the copy. For example, you  can describe the original document as...

Control-panel layout
The control panel includes a touchscreen graphical display, job-control buttons, a numeric
keypad, and three light-emitting diode (LED) status lights.  
1 Touchscreen graphical display
2 Numeric keypad
3S
LEEP button
4 M
ENU button
5 S
TATUS button
6 S
TOP button
7 R
ESET button
8 S
TART button
9 Attention light
10 Data light
11 Ready light
12 Display contrast adjustment
30 Chapter 2 Using the control panel ENWW
 

Control-panel features
Features/buttonsFunction
 (Help button)Provides access to What is this? Help. This
function is embedded in the touchscreen menus.
ResetResets the job settings to factory or user-defined
default values.
StopCancels the active job.
StartBegins a copy job, starts digital sending, or
continues a job that has been interrupted.
Numeric keypadAllows you to type numeric values for number of
copies required and other numeric values.
ENWWControl-panel features31
 

Home-screen navigation
Use the following control-panel elements in the graphical display to gain access to MFP
features.
1 Touch this to use the copy screen. For more information, see Copy-screen navigation.
2 Touch this to use the e-mail screen. For more information, see 
E-mail screen navigation .
3 Touch this to use the fax screen. For more information, see 
Faxing  and see the  HP LaserJet
Analog Fax Accessory 300 User Guide .
NoteIf you install the optional HP Digital Sending Software (DSS),...

Help system
At any time, you can gain access to the help system on the touchscreen of the graphical
display by touching 
.
What is this? Help
The MFP provides information about any topic on the touchscreen of the graphical display.
On the top level screen, touch 
 (Help button), and then touch  What is this?. After
touching an item, a pop-up dialog box opens and displays information about the item you
touched. After reading the information, touch a clear space on the screen to remove the
What is this?...

Menu map
To see the current settings for the menus and items that are available in the control panel,
print a control-panel-menu map:
1. Touch  Menu.
2. Touch  INFORMATION .
3. Touch  PRINT MENU MAP .
Many of these values can be overridden from the driver or program. You might want to store
the menu map near the MFP for reference.
The content of the menu map varies, depending on the options currently installed in the
MFP. For a complete list of control-panel items and possible values, see the sections...

Retrieve job menu
NoteIf no private, stored, quick copy, or proof-and-hold jobs are stored on the MFP hard disk or in
RAM memory, the message  NO STORED JOBS appears when the menu is selected.
1. A list of user names appears on the control-panel display.
2. Select a user name, and then a list of stored jobs for that user appears.
3. Select a job name, and then print or delete the  job. If a job requires a PIN to print, 
(lock symbol) appears next to the PRINT command and a PIN must be provided. If a job...

Information menu
To print an information page, scroll to and touch the information page that you want.
ItemExplanation
PRINT MENU MAPGenerates a menu map that shows layout and
current settings of the control menu items.
The MFP will return to the Ready state when the
page is completed.
PRINT CONFIGURATIONGenerates a page detailing the current
configuration of the MFP.
The MFP will return to the online  Ready state
when the page is completed.
PRINT SUPPLIES STATUS PAGEGenerates a page that shows the...