HP LaserJet 3052 User Manual
Here you can view all the pages of manual HP LaserJet 3052 User Manual. The HP manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 141
Adjusting the lighter/darker (contrast) setting The lighter/darker setting affects the lightness or darkness (contrast) of the copy. Use the following procedure to change the contrast for the current copy job only. To adjust the lighter/darker setting for the current job 1.On the all-in-one control panel, press Lighter/Darker to see the current contrast setting. 2. Use the < or the > button to adjust the setting. Move the slider to the left to make the copy lighter than the original, or move the...
Page 142
Reducing or enlarging copies The all-in-one can reduce copies to as little as 25% of the original size or enlarge copies to as much as 400% of the original size. Reduction/enlargement settings ●Original=100% ● Lgl > Ltr=78% ● Lgl > A4=83% ● A4 > Ltr=94% ● Ltr > A4=97% ● Full Page=91% ● Fit to page (HP LaserJet 3052/3055/3390/3392 all-in-one only) ● 2 pages/sheet ● 4 pages/sheet ● Custom: 25-400% NOTE When using the Fit to page setting, copy from the flatbed scanner only. When using the 2 pages/sheet...
Page 143
To adjust the default copy size NOTEThe default copy size is the size to which copies are normally reduced or enlarged. If you keep the factory default size setting of Original=100%, all copies will be the same size as the original document. 1. Press Menu. 2. Use the < or the > button to select Copy setup, and then press . 3. Use the < or the > button to select Def. Redu/Enlrg , and then press . 4. Use the < or the > button to select the option for how you normally want to reduce or enlarge...
Page 144
Changing the number of copies You can choose to have the default number of copies be any number from 1 to 99. To change the number of copies for the current job (HP LaserJet 3050 all-in-one) 1. On the all-in-one control panel, use the alphanumeric buttons to type the number of copies (between 1 and 99) that you want to make for your current job. 2. Press Start Copy to begin copying your job. NOTEThe change in the setting remains active for about two minutes after the copy job has been completed. During...
Page 145
Changing the copy-collation setting You can set the all-in-one to automatically collate multiple copies into sets. For example, if you are making two copies of three pages and the automatic collation is on, the pages print in this order: 1,2,3,1,2,3. If automatic collation is off, the pages print in this order: 1,1,2,2,3,3. To use the automatic collation, the original document size must fit into the memory. If it does not, the all-in-one makes only one copy and a message appears notifying you of the...
Page 146
Copying onto media of different types and sizes The all-in-one is set to copy on either letter- or A4-size paper, depending on the country/region in which it was purchased. You can change the size and type of media that you copy to for the current copy job or for all copy jobs. Media-size settings ● Letter ● Legal ● A4 Media-type settings ● Plain ● Preprinted ● Letterhead ● Transparency ● Prepunched ● Labels ● Bond ● Recycled ● Color ● Light ● Heavy ● Cardstock ● Envelope ● Vellum ● Rough Paper To change...
Page 147
To change the default media-size setting 1.On the all-in-one control panel, press Menu. 2. Use the < or the > button to select System setup, and then press . 3. Use the < or the > button to select Paper setup, and then press . 4. Use the < or the > button to select Def. paper size, and then press . 5. Use the < or the > button to select a media size and then press . 6. Press to save the selection. To change the default media-type setting 1. On the all-in-one control panel, press Menu....
Page 148
Copying two-sided documents (HP LaserJet 3050 all-in- one) To copy a multiple-page stack of two-sided documents (HP LaserJet 3050 all-in-one) Copies resulting from this procedure are printed on one side, and need to be hand-collated. 1.Load the documents to be copied into the automatic document feeder (ADF) input tray with the first page facing down, and with the top of the page leading into the ADF. 2. Press Start Copy . The odd-numbered pages are copied and printed. 3. Remove the stack from the ADF...
Page 149
Copying two-sided documents (HP LaserJet 3052/3055 all-in-one) To copy a multiple-page stack of two-sided documents (3052/3055 all-in-one) Copies resulting from this procedure are printed on one side, and need to be hand-collated. 1.Load the documents to be copied into the automatic document feeder (ADF) input tray with the first page facing up, and with the top of the page leading into the ADF. 2. Press Start Copy. The odd-numbered pages are copied and printed. 3. Remove the stack from the ADF output...
Page 150
Using automatic two-sided printing (duplexing) to copy documents (HP LaserJet 3390/3392 all-in-one) Use the 2-Sided button on the control panel display to use duplexing to achieve various\ results. NOTE The default setting is 1–1. The 2-Sided LED on the control panel turns on when another setting is used. Table 7-1 2-Sided settings Document type2-Sided settingResulting copies2-Sided LED One-sided1–1One-sidedOff One-sided1–2Two-sidedOn Two-sided 2–2 Two-sided On To make two-sided copies from...