HP LaserJet 3050z User Manual

Clear jams
This section contains instructions for clearing jams from the all-in-one.
Clear jams from the print cartridge area
To clear a jam in the print cartridge area, perform the following steps:
CAUTIONDo not use sharp objects, such as tweezers or needle-nose pliers, to remove
jams. Damage caused by sharp objects will not be covered by the warranty.
1. Open the print-cartridge door, and remove the print cartridge.
HP LaserJet 3390/3392
HP LaserJet 3050 HP LaserJet 3052/3055
CAUTION To prevent damage...

4.Replace the print cartridge and close the print-cartridge door.
HP LaserJet 3390/3392HP LaserJet 3050 HP LaserJet 3052/3055
5.On the HP LaserJet 3390/3392 all-in-one,  close the rear output door.
Clear jams from the input trays (HP LaserJet 3050/3052/3055 all-in-one)
To clear a jam in the input trays, perform the following steps:
CAUTIONDo not use sharp objects, such as tweezers or needle-nose pliers, to remove
jams. Damage caused by sharp objects will  not be covered by the warranty.
1.Open tray 1 and...

CAUTIONDo not use sharp objects, such as tweezers or needle-nose pliers, to remove
jams. Damage caused by sharp objects will not be covered by the warranty.
1. Open the rear output door.
2.Rotate the green pressure release levers downward.
3.Open the single-sheet priority input slot (tray 1) door.
HP LaserJet 3390/3392
ENWW Other: How do I? 255
 

4.With both hands, grasp the side of the media that is most visible (this includes the middle), and
carefully pull it free from the all-in-one.
CAUTION Pull the jammed media straight away from the all-in-one. Pulling jammed
media out of the all-in-one at an angle can damage the all-in-one.
HP LaserJet 3390/3392
5. Close the single-sheet priority input slot (tray 1) door.
HP LaserJet 3390/3392
6.Open tray 2 and tray 3.
256 Chapter 11   How do I? ENWW
 

7.With both hands, grasp the side of the media  that is most visible (this includes the middle), and
carefully pull it free from the all-in-one.
8. If no media is visible, open the print-cartridge  door, remove the print cartridge, and rotate the
upper media guide. Carefully pull the media up and out of the all-in-one.
9. Close the main input tray (tray 2).
10. Close the rear output door.
ENWW Other: How do I? 257
 

Clear jams from the output bin
CAUTIONDo not use sharp objects, such as tweezers or needle-nose pliers, to remove
jams. Damage caused by sharp objects will  not be covered by the warranty.
With both hands, grasp the side of the media  that is most visible (this includes the middle), and
carefully pull it free from the all-in-one.
HP LaserJet 3390/3392
HP LaserJet 3050 HP LaserJet 3052/3055
258 Chapter 11   How do I? ENWW
 

Clear jams from the straight-through output path (HP LaserJet 3390/3392 all-
in-one)
To clear a jam in the straight-through output path, perform the following steps:
CAUTIONDo not use sharp objects, such as tweezers or needle-nose pliers, to remove
jams. Damage caused by sharp objects will not be covered by the warranty.
1. Open the rear output door.
2.Rotate the green pressure release levers downward.
3.With both hands, grasp the side of the media  that is most visible (this includes the middle), and...

4.Close the rear output door.
HP LaserJet 3390/3392
NOTE The pressure release levers automatically close when you close the rear output
door.
260 Chapter 11   How do I? ENWW
 

Clear jams from the automatic two-sided printing (duplexing) path
To clear a jam in the automatic two-sided path, perform the following steps:
CAUTIONDo not use sharp objects, such as tweezers or needle-nose pliers, to remove
jams. Damage caused by sharp objects will not be covered by the warranty.
1. Open the rear output door.
2.Rotate the green pressure release levers downward.
3.Remove tray 2.
4.Push down on the green lever on the automatic two-sided path door on the front of the all-in-one.
ENWW...

5.With both hands, grasp the side of the media that is most visible (this includes the middle), and
carefully pull it free from the all-in-one.
6.Close the automatic two-sided path door.
7.Reinsert the main input tray (tray 2).
8.Open the automatic two-sided path door on the back of the all-in-one.
262 Chapter 11   How do I? ENWW