HP DeskJet F370 User Manual

Replace the print cartridges
Follow these instructions when the ink level is low.
NoteWhen the ink level for the print cartridge is low, a message appears on
your computer screen. You can also check  the ink levels by using the software
installed with the HP All-in-One.
When you receive a low-ink warning message, make sure you have a replacement
print cartridge available. You should also replace  the print cartridges when you see
faded text or if you experience print  quality issues related to the print...

1Print cartridge slot for the tri-color print cartridge
2Print cartridge slot for the black and photo print cartridges
4. Pull the print cartridge toward you out of its slot.
5. If you are removing the black print cartridge in order to install the photo printcartridge, store the black print cartridge in  the print cartridge protector or an
airtight plastic container.
If you are removing the print cartridge because it is low or out of ink, recycle the
print cartridge. The HP Inkjet Supplies Recycling...

7. Slide the new print cartridge forward into the empty slot. Then gently push on the
upper part of the print cartridge forward until it clicks into the socket.
If you are installing the tri-color print  cartridge, slide it into the left slot.
If you are installing a black or photo  print cartridge, slide it into the right slot.
8. Close the print cartridge door.
9. If the print cartridge alignment sheet prints, load it on the left front corner of the
glass with the top of the page to the left.
10. Press...

NoteIf you remove and reinstall the same print cartridge, the HP All-in-One
will not prompt you to align the print cartridges. The HP All-in-One remembers
the alignment values for that print cartridge, so you do not need to realign the
print cartridges.
To align newly installed print cartridges
1. Make sure you have letter or A4 unused  plain white paper loaded in the input tray.
The HP All-in-One prints a print cartridge alignment sheet.
Note If you have colored paper loaded in the input tray when you...

To clean the print cartridges from the HP Photosmart Mac Software
1. Load letter, A4, or legal unused plain white paper into the input tray.
2. In the HP Photosmart Studio task bar, click  Devices.
The  HP Device Manager  window appears.
3. Make sure the HP All-in-One is selected in the  Devices pop-up menu.
4. From the  Information and Settings  pop-up menu, choose Maintain Printer.
The  Select Printer  window appears.
5. If the  Select Printer  dialog box appears, choose the HP All-in-One, and then...

NoteDo not remove both print cartridges at the same time. Remove and
clean each print cartridge one at a time. Do not leave a print cartridge
outside the HP All-in-One for more than 30 minutes.
4. Inspect the print cartridge contacts for ink and debris buildup.
5. Dip a clean foam rubber swab or lint-free cloth into distilled water, and squeeze any excess water from it.
6. Hold the print cartridge by its sides.
7. Clean only the copper-colored contacts. Allow the print cartridges to dry for approximately...

Chapter 8
34HP Deskjet F300 All-in-One series
Maintain the HP All-in-One
 

9Order supplies
You can order HP products, such as recommended types of paper and print
cartridges, online from the HP website.
● Order paper, or other media
● Order print cartridges
● Order other supplies
Order paper, or other media
To order HP papers and other supplies, such  as HP Premium Photo Papers or HP All-
in-One Paper, go to  www.hp.com/learn/suresupply . If prompted, choose your country/
region, follow the prompts to select your product, and then click one of the shopping
links on the page....

To find out the reorder number through the HP Photosmart Mac Software
1. In the HP Photosmart Studio task bar, click Devices.
The  HP Device Manager  window appears.
2. Make sure the HP All-in-One is selected in the  Devices pop-up menu.
3. From the  Information and Settings  pop-up menu, choose Maintain Printer.
The  Select Printer  window appears.
4. If the  Select Printer dialog box appears, choose the HP All-in-One, and click
Launch Utility .
The  HP Printer Utility  window appears.
5. In the...

10Troubleshooting information
This chapter contains troubleshooting information for the HP All-in-One. Specific
information is provided for installation and configuration issues, and some operational
topics. For more troubleshooting information, see the onscreen Help that came with
your software.
Many issues are caused when the HP All-in-One is connected to the computer using a
USB cable before the HP All-in-One software is installed on the computer. If you
connected the HP All-in-One to your computer...