HP Designjet Z3200ps 44 in User Manual

8.Select your paper category and type.
TIP:If you have loaded a paper type whose name does not appear in the paper list, see The
paper type is not in the driver on page 143.
9.The printer checks the alignment and measures the width. It cuts a strip off the leading edge of
glossy or satin paper to ensure perfect quality; other paper types are not cut.
10.Look at the front panel; you may find some instructions there.
11.When the roll is aligned, the front panel displays the Ready message and the printer is...

3.Select Paper load.
4.Select Load roll.
5.Continue with step 9 of the easy loading process (see Select your paper category and type.
on page 31).
Unload a roll
Before unloading a roll, check whether there is paper on the roll or whether the end of the paper is no
longer attached to the roll, and follow the appropriate procedure as described below.
TIP:Do not touch the paper while the printer is printing, as it causes image quality defects.
Unload paper key procedure with paper on the roll
If there is...

2.Select Unload paper.
3.Continue from step two of the Unload paper key process.
Roll out of paper procedure
If the end of the paper is no longer attached to the roll, use the following procedure.
1.If you have already started the unload process, press the Cancel key on the front panel to cancel
that procedure.
2.Lift the blue lever on the left. If the front panel displays a warning about the lever, ignore it.
3.Pull out the paper from the printer. Pull from wherever the paper is accessible; the back of...

2.Insert the sheet into the feeder. Load your sheet aligned with the load line and insert until the paper
cannot continue, with thicker sheets you feel resistance. The printer detects the sheet in three
seconds. A countdown begins on the front-panel display.
CAUTION:Do not push your fingers inside the printers paper path.
3.After the countdown, the paper feeds into the printer. Guide the sheet into the printer; this is
especially important with thicker papers.
4.The front-panel display asks whether you...

6.If you selected Sheet in the Paper Load menu, the printer checks the alignment and measures
the sheet.
NOTE:Depending on the length of the sheet, it feeds out the front of the printer.
If you selected Sheet, without skew check, you will need to align the sheet manually.
7.If the paper has been loaded successfully, the front panel displays the Ready message and the
printer ready to print. If the paper is not straight, follow the instructions on the front-panel display.
NOTE:When correctly loaded, the...

3.Select Paper load.
4.Select Sheet, with skew check or Sheet, without skew check.
NOTE:The recommended option is Sheet, with skew check.
NOTE:If you load without a skew check, print previews may not work properly. See Preview a
print on page 51.
5.Continue with step 5 of the easy loading procedure (see Select your paper category and type.
on page 34).
Unload a single sheet
To unload a sheet without printing, use the Unload paper key or the paper menu procedure.
To unload a single sheet after printing,...

Paper menu procedure
You can also unload a sheet from the front panels Paper menu.
1.
From the front panel, select the Paper menu icon 
.
2.Select Unload paper. The sheet unloads out of the front of the printer, either catch it manually or
allow it to fall into the basket.
View information about the paper
To view the loaded paper information, press the View loaded paper key on the front panel.
You can also select the Paper menu icon 
 and then View loaded paper.
The following information is displayed on...

NOTE:Photo and coated paper requires careful handling, see The print is scuffed or scratched
on page 154.
Paper presets
Each supported paper type has its own characteristics. For optimum print quality, the printer changes
the way it prints on each different paper type. For example, some may need more ink and some may
require a longer drying time. So the printer must be given a description of the requirements of each
paper type. This description is called the paper preset. The paper preset contains the...

6.Check that the new paper type appears in the Additional paper or Custom paper category in
your printers front panel.
7.Synchronize the new paper type with the driver by opening the HP Printer Utility. Select your printer,
then the Color Center tab, then Paper Preset Management and Synchronize Paper Presets
(
 button under Mac OS).
Now that you have imported the paper preset, you can select the paper type from the front panel and
from the driver. The ICC profile for the new paper type is ready to use by...

8.Click Next under Windows, Continue under Mac OS.
9.If the paper type permits, the printer performs a color calibration (about 10 minutes) and creates
the ICC profile (about 20 minutes).
Now that you have created the paper preset, you will be able to select the paper type from the front
panel and from the driver under the Custom paper category. The ICC profile for the new paper type
will be ready to use by your application.
You can export the new paper preset to your computer and use it on other HP...