HP Designjet Z3200ps 44 in User Manual

●Conversion Options > Intent: select Perceptual.
●Click OK.
4.From the File menu, select Open to open the image.
●If the document has an embedded color profile that does not match the current working space,
select Use the embedded profile. Otherwise, select Assign working space; in this case, if
the displayed image does not look correct, try assigning it to other color spaces with Edit >
Assign Profile (try sRGB, Adobe RGB, ColorMatch RGB and others) until you are satisfied.
●Click OK.
5.From the File...

◦Orientation: select the orientation of your image on the paper.
◦Click OK.
●Set the Position and the Scaled Print Size you need.
●Make sure that More Options are displayed.
●Select the Color Management tab.
◦Print: select Document.
◦Options > Color Handling: select Let Photoshop Determine Colors.
◦Options > Printer Profile: select the right profile for your printer and paper type.
◦Options > Rendering Intent: select Perceptual.
●Click Print.
6.Choose driver settings.
●Printer: select the printer (for...

Print a color photo for an exhibition (Photoshop, PCL3 driver)
This example uses Adobe Photoshop CS2 under Mac OS, with the PCL3 driver. Color management is
done by Photoshop.
1.Initial recommendations:
●Choose an appropriate paper type for the purpose.
●The paper type should be calibrated and profiled with the printer and the print-quality level
that you intend to use. See 
Color calibration on page 69 and Color profiling on page 70.
●For a correct preview of the printed image, the monitor should also...

4.From the File menu, select Open to open the image.
●If the document has an embedded color profile that does not match the current working space,
select Use the embedded profile. Otherwise, select Assign working space; in this case, if
the displayed image does not look correct, try assigning it to other color spaces with Edit >
Assign Profile (try sRGB, Adobe RGB, ColorMatch RGB and others) until you are satisfied.
●Click OK.
5.From the File menu, select Print with Preview.
●Select Page Setup.
◦Format...

◦Options > Rendering Intent: select Perceptual.
●Click Print.
6.Choose driver settings.
●Printer: select the printer (for example, HP Designjet Z3200ps Photo 24in).
●Select Paper Type/Quality from the drop-down menu, then select the Paper tab.
◦Paper Type: select the paper type that is currently loaded into the printer.
◦Quality Options: select Standard and drag the slider to Quality.
●Click Print.
Print a black-and-white photo for an exhibition (Photoshop, PS driver)
This example uses Adobe Photoshop...

3.From the Edit menu, select Color Settings.
●Make sure that More Options are displayed.
●Working Spaces > RGB: select Adobe RGB (1998) or sRGB.
●Color Management Policies: select Preserve Embedded Profiles.
●Profile Mismatches: check Ask When Opening and Ask When Pasting.
●Missing Profiles: check Ask When Opening.
●Conversion Options > Intent: select Perceptual.
●Click OK.
4.From the File menu, select Open to open the image.
●If the document has an embedded color profile that does not match the current...

5.(Optional) Use Photoshop to convert the image to grayscale. The simple way is to go to the
Image menu and select Mode > Grayscale.
Alternatively, you can go to the Image menu and select Adjustments > Channel Mixer, to choose
the percentage contribution of each color channel to the grayscale image, as follows:
a.Check Monochrome.
b.Drag any source channels slider to the left to decrease the channels contribution to the output
channel or to the right to increase it, or enter a value between -200% and...

◦Options > Rendering Intent: select Perceptual.
●Click Print.
7.Choose driver settings.
●Printer: select the printer (for example, HP Designjet Z3200ps Photo 24in).
●Select Image Quality from the drop-down menu, then select the Paper Type that is currently
loaded into the printer (or Any). Also, select Standard quality options and drag the slider
to Quality.
●Select Color Options from the drop-down menu.
◦Select Print in Grayscale.
TIP:If you experience bronzing with these options, see Bronzing on page...

◦Under Color Management, select Printer Managed Colors, and then select Use Adobe
RGB (1998) from the source profile list.
●Click Print.
Print a black-and-white photo for an exhibition (Photoshop, PCL3 driver)
This example uses Adobe Photoshop CS2 under Mac OS, with the PCL3 driver. The color management
is done by the printer.
The recommended approach to creating a black-and-white image is to take a color image and convert
it to grayscale in an image editing program such as Photoshop. In this scenario,...

●Conversion Options > Intent: select Perceptual.
●Click OK.
4.From the File menu, select Open to open the image.
●If the document has an embedded color profile that does not match the current working space,
select Use the embedded profile. Otherwise, select Assign working space; in this case, if
the displayed image does not look correct, try assigning it to other color spaces with Edit >
Assign Profile (try sRGB, Adobe RGB, ColorMatch RGB and others) until you are satisfied.
●Click OK.
5.(Optional) Use...