HP Designjet T1300 1118 mm User Manual

5.Press the Properties button.
6.Select the Device and Document Settings tab, and press the Custom Properties button.
ENWWPrint a project
103
 

7.In the Paper/Quality tab, check the Show preview before printing box, and select the
paper type that you intend to use.
NOTE:If you select neither the paper source nor the paper type, the printer will not print on any
protected roll (see 
Roll protection (T1300 series) on page 67).
8.Select the print quality (your own choice between speed and quality of printing).
9.If you intend to print on roll paper, you must decide where the printer should cut the paper. Press
the Margins/Layout button and select...

10.Select the Features tab, then select the Autorotate option. If you have a T1300 series printer,
select the Crop lines option also. Autorotation can help to avoid wasting paper, and the crop
lines will show you where to cut the paper after printing.
11.Press the OK button and save your configuration changes to a PC3 file.
ENWWPrint a project
105
 

12.When you have pressed the OK button in the Plot window, the printer will construct a print
preview (T1300 series only).
If you have the HP Designjet software suite installed, you will see the preview in HP Designjet
Preview.
106 Chapter 11   Practical printing examples ENWW
 

Using the Embedded Web Server to submit files (T1300 series)
From the HP Utility or the Embedded Web Server, select Job Center > Submit Job. With some Web
browsers, you will see the window below; with other Web browsers, the mechanism for adding files is
slightly different.
Press the Add files button (or Choose File, Add another file) to choose the files from your
computer that you want to print. The files must be in one of the following formats:
●PDF (PostScript printers only)
●PostScript (PostScript...

This setting will apply to jobs that do not contain any printer emulation setting saved in the job.
Using clip contents by margins
You can select this margins option from Advanced settings > Paper > Layout/Margins > Print
with margins > Layout > Clip contents by margins.
Use this option when the contents to be printed have white borders and a size equal to that of the
paper you have selected. The printer will use the white border for its margins and you will get a page
of size equal to that which is...

3.Ensure that the correct printer is selected, then press the Properties button.
4.Select the Device and Document Settings tab, and press the Custom Properties button.
ENWWPrint a presentation
109
 

5.In the Paper/Quality tab, check the Show preview before printing box, and select the
paper type that you intend to use.
NOTE:If you select neither the paper source nor the paper type, the printer will not print on any
protected roll (see 
Roll protection (T1300 series) on page 67).
6.Select the print quality (your own choice between speed and quality of printing).
7.If you intend to print on roll paper, you must decide where the printer should cut the paper. Press
the Margins/Layout button and select...

8.If you are using photo or glossy paper, you can select Borderless printing (T1300 series only).
9.Select the Features tab, then select the Autorotate option. If you have a T1300 series printer,
select the Crop lines option also. Autorotation can help to avoid wasting paper, and the crop
lines will show you where to cut the paper after printing.
10.Press the OK button and save your configuration changes to a PC3 file.
ENWWPrint a presentation
111
 

11.When you have pressed the OK button in the Plot window, the printer will construct a print
preview (T1300 series only).
Using Adobe Photoshop
1.In Photoshop CS5, select File > Print and then select your printer.
112 Chapter 11   Practical printing examples ENWW