HP DesignJet 110plus User Manual
Have a look at the manual HP DesignJet 110plus User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1114 HP manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
HP Designjet 110plus/110 plus nr printer—Quick Reference Guide 19 Tell me about combinations of flashing icons Unload roll When flashing: The printer is waiting for you to unload the roll manually. Action: Unload the roll completely; you do not need to remove the spindle from the printer. When off: Normal. Roll misaligned When flashing: The roll of paper is misaligned and must be reloaded. Action: Unload the roll and reload it, paying special attention to alignment. When off: Normal. QRG110plusnr.fm Page 19 We dnesday, June 16, 2004 2:26 PM
HP Designjet 110plus/110 plus nr printer—Quick Reference Guide 20 For much more about… how to use your printer additional information about your printer troubleshooting printer problems …see the Using Your Printer CD or (under Windows only) the online help for the printer driver. QRG110plusnr.fm Page 20 We dnesday, June 16, 2004 2:26 PM
HP Designjet 110plus/110 plus nr printer—Quick Reference Guide 21 HP limited warranty statement HP Designjet 110plus/110 plus nr A: Extent of limited warranty 1. Hewlett-Packard (HP) warrants to the end-user customer that the HP products specified above will be free from defects in materials and workmanship for the duration specified above. Customer is responsible for maintaining proof of date of purchase. 2. For software products, HP’s limited warranty applies only to a failure to execute programming instructions. HP does not warrant that the operation of any product will be uninterrupted or error free. 3. HP’s limited warranty covers only those defects which arise as a result of appropriate use of the product, and does not apply to any: a. Improper or inadequate maintenance or modification; b. Software, interfacing, media, parts, or supplies not provided or supported by HP; or c. Operation outside the product’s specifications. Routine printer maintenance operations in the HP Designjet 110plus/110 plus nr, such as cleaning and preventive maintenance services (including parts contained in any preventive maintenance kit and HP service engineer visits), are not covered by HP’s limited warranty, but in some countries may be covered under a separate support contract. 4. For HP printer products, the use of a refilled or non-original HP consumable product (ink, printhead or ink cartridge) does not affect either the warranty to the customer or any HP support contract with the customer. However, if printer failure or damage is attributable to the use of a non-HP or refilled ink cartridge, HP will charge its standard time and materials charges to service the printer for the particular failure or damage. 5. If HP receives, during the applicable warranty period, notice of a defect in any software, media, or consumable product which is covered by HP’s warranty, HP shall deliver another product to customer to replace the defective one. If HP receives, during the applicable warranty period, notice of a defect in any hardware product which is HP product Duration of limited warranty Printer and related HP hardware: 1 year (from the date of purchase by the customer) Software: 90 days (from the date of purchase by the customer) Black printhead: Until the “end of wa rranty” date printed on the product is reached, or 530 cm³ of HP ink have been cycled through the printhead, whichever occurs first Cyan, magenta, and yellow printheads: Until the “end of warranty” date printed on the product is reached, or 200 cm³ of HP ink have been cycled through the printhead, whichever occurs first Ink cartridge: Until the genuine HP in k is depleted as indicated by the printer, or the “end of wa rranty” date printed on the product is reached, whichever occurs first QRG110plusnr.fm Page 21 We dnesday, June 16, 2004 2:26 PM
HP Designjet 110plus/110 plus nr printer—Quick Reference Guide 22 covered by HP’s warranty, HP shall either repair or replace the defective product, at HP’s option. A replacement part, in return for a defective one and remote part installation assistance, if needed, may be provided to the customer, at HP’s option. HP may, at its option, waive the requirement for the customer to return the defective part. 6. If HP is unable to repair or replace, as applicable, a defective product which is covered by HP’s warranty, HP shall, within a reason able time after being notified of the defect, refund the purchase price for the product. 7. HP shall have no obligation to repair, replace, or refund until the customer returns the defective product to HP. 8. Any replacement product may be either new or like-new, provided that it has functionality at least equal to th at of the product being replaced. 9. HP products may contain remanufactured parts or components equivalent to new in performance or may have been subject to incidental use. 10.HP’s limited warranty is valid in any country or locality where HP has a support presence for this product and where HP has marketed this product. The level of warranty service you receive may vary according to local standards. HP will not alter form, fit or function of the product to make it operate in a country for which it was never intended to function for legal or regulatory reasons. Contracts for additional services may be available for any authorized HP service facility where the listed HP product is distributed by HP or an authorized importer. 11.Any applicable print cartridge warranty shall not apply to HP print cartridges that have been refilled, remanufactured, refurbished, misused, or tampered with in any way. B. Limitations of warranty 1. TO THE EXTENT ALLOWED BY LOCAL LAW, NEITHER HP NOR ITS THIRD PARTY SUPPLIERS MAKE ANY OTHER WARRANTY OR CONDITION OF ANY KIND, WHETHER EXPRESS OR IMPLIED, WITH RESPECT TO THE HP PRODUCTS, AND SPECIFICALLY DISCLAIM THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY, SATISFACTORY QUALITY, AND FITNESS FOR A PARTICULAR PURPOSE. C. Limitations of liability 1. To the extent allowed by local law, the re medies provided in this Warranty Statement are the customer’s sole and exclusive remedies. 2. TO THE EXTENT ALLOWED BY LOCAL LAW, EXCEPT FOR THE OBLIGATIONS SPECIFICALLY SET FORTH IN THIS WARRANTY STATEMENT, IN NO EVENT SHALL HP OR ITS THIRD PARTY SUPPLIERS BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, WHETHER BASED ON CONTRACT, TORT, OR ANY OTHER LEGAL THEORY AND WHETHER ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. QRG110plusnr.fm Page 22 We dnesday, June 16, 2004 2:26 PM
HP Designjet 110plus/110 plus nr printer—Quick Reference Guide 23 D. Local law 1. This Warranty Statement gives the customer specific legal rights. The customer may also have other rights which vary from state to state in the United States, from province to province in Canada, and from country to country elsewhere in the world. 2. To the extent that this Warranty Statement is inconsistent with local law, this Warranty Statement shall be deemed modified to be consistent with such local law. Under such local law, certain disclaimers and limitations of this Warranty Statement may not apply to the customer. For example, some states in the United States, as well as some governments outside the United States (including provinces in Canada), may: a. Preclude the disclaimers and limitations in this Warranty Statement from limiting the statutory rights of a consumer (e.g. the United Kingdom); b. Otherwise restrict the ability of a manufacturer to enforce such disclaimers or limitations; or c. Grant the customer additional warranty rights, specify the duration of implied warranties which the manufacturer cannot disclaim, or not allow limitations on the duration of implied warranties. 3. FOR CONSUMER TRANSACTIONS IN AUSTRALIA AND NEW ZEALAND, THE TERMS IN THIS WARRANTY STATEMENT, EXCEPT TO THE EXTENT LAWFULLY PERMITTED, DO NOT EXCLUDE, RESTRICT, OR MODIFY, AND ARE IN ADDITION TO, THE MANDATORY STATUTORY RIGHTS APPLICABLE TO THE SALE OF HP PRODUCTS TO SUCH CUSTOMERS. Revision: February 10th, 2003 QRG110plusnr.fm Page 23 We dnesday, June 16, 2004 2:26 PM
HP Designjet 110plus/110 plus nr printer—Quick Reference Guide 24 Regulatory notices You can obtain current Material Safety Data Sheets for the ink systems used in the printer by mailing a request to this address: Hewlett-Packard Customer Information Center, 19310 Pruneridge Avenue, Dept. MSDS, Cupertino, CA 95014, U.S.A. There is also a Web page: http://www.hp.com/hpinfo/community/environment/productinfo/psis_inkjet.htm Regulatory Model Number For regulatory identification purposes, your product is assigned a Regulatory Model Number. The Regulatory Model Number for your product is BCLAA-0302. This regulatory number should not be confused with the marketing name (Designjet 100 series printer) or product numbers (C7791X, C7796X). QRG110plusnr.fm Page 24 We dnesday, June 16, 2004 2:26 PM
HP Designjet 110plus/110 plus nr printer—Quick Reference Guide
25
DECLARATION OF CONFORMITY
according to ISO/IEC Guide 22 and EN 45014
Manufacturers Name: Hewlett-Packard Española S.A.
Manufacturers Address: Inkjet Commercial Division
Avenida Graells, 501
08714 Sant Cugat del Vallès
Barcelona, Spain
Declares that the product
Product Name: HP Designjet 100 Series Inkjet Printers
Model Numbers: C7791X and C7796X (where X represents any single letter)
Product Accessory: All
Regulatory Model: BCLAA-0302
Conforms to the following Product Specifications
Safety : IEC 60950:1999
EN 60950:2000
IEC 60825-1:1993 + A1
EN 60825-1:1994 + A11 Class 1 for Laser/LED
EMC :
CISPR 22:1997 / EN 55022:1998 Class B
(1)(2)
CISPR 24:1997 +A1 / EN 55024:1998 +A1
IEC 61000-3-2:2001 / EN 61000-3-2:2000
IEC 61000-3-3:2002 / EN 61000-3-3:1995 +A1
FCC Title 47 CFR, Part 15 Class B
(1)(3)
Supplementary Information
The product herewith complies with the requirements of the Low-Voltage Directive 73/23/EEC and
the EMC Directive 89/336/EEC and carries the CE marking accordingly.
(1)The product exhibits class A operation when connected to LAN cables using print server
accessories.
(2)The product was tested in a typical user configuration(3)This Device complies with part 15 of the FCC Rules. Operation is subject to the following two
Conditions:
1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause
undesired operation
Sant Cugat del Vallès (Barcelona),
October 24
th, 2003
Josep-Maria Pujol,
Product Regulations Manager
European contact: your local Hewlett-Packard Sales and Service Office or Hewlett-Packard GmbH,
Department HQ TRE, Herrenberger Strasse 140, D-71034 Böblingen, Germany (Fax: +49 7031
143143)
QRG110plusnr.fm Page 25 We dnesday, June 16, 2004 2:26 PM
HP Designjet 110 plus/110plus nr printer—Quick Reference Guide 26 © 2005 Hewlett-Pa ckard Company Avenida Graells 501 08174 Sant Cugat del Vallès Barcelona Spain QRG110plusnr.fm Page 26 We dnesday, June 16, 2004 2:26 PM
1 Comment...? Comment charger des feuilles de papier ? (Conseils généraux)..................2 Comment charger du papier en utilisant le chemin avant ?........................3 Comment décharger du papier du chemin avant ? ...................................3 Comment charger du papier dans le bac dentrée ? ................................4 Comment imprimer sur de grandes feuilles ? ...........................................6 Comment charger un rouleau de papier ?...............................................8 Comment décharger un rouleau de papier ? .........................................10 Comment remplacer les cartouches dencre ? ........................................11 Problème... Le problème est dû à un bourrage papier .............................................12 Le problème est que le rouleau de papier est bloqué ..............................13 Le problème est dû au fait que limprimante sest arrêtée ........................14 Le problème est que limprimante na pas reçu le travail .........................15 Le problème est dû à autre chose.........................................................16 Pour en savoir plus sur... Pour en savoir plus sur le panneau avant ..............................................17 Pour en savoir plus sur les icônes du panneau avant ..............................18 Signification du clignotement de plusieurs icônes ...................................19 Informations légales Déclaration de garantie HP ................................................................21 Réglementations ................................................................................ 24 Informations supplémentaires Pour des informations supplémentaires sur lutilisation de votre imprimante, sur votre imprimante même (y compris les pilotes et le réseau) et les problèmes de dépannage de limprimante, reportez-vous au CD Utilisation de votre imprimante ou à laide en ligne du pilote dimprimante. HP Designjet 110plus/110plus nr —Guide de référence rapide QRG110plusnr.fm Page 1 Wednesday, February 9, 2005 11:56 AM
Imprimante HP Designjet 110plus/110plus nr—Guide de référence rapide 2 Les feuilles de papier peuvent être chargées de trois manières différentes dans limprimante : Le bac dentrée à lavant de limprimante pour plusieurs feuilles de papier entre 76 × 142 mm et 457 × 610 mm (C+). Vous pouvez charger jusquà 50 feuilles de papier de 0,2 mm dépaisseur (ou 150 g/m²) dans le bac non déployé, ou 25 feuilles de la même épaisseur dans le bac déployé. Des enveloppes peuvent également être chargées dans le bac dentrée. Le chemin avant pour les feuilles de papier uniques entre 110 × 205 mm et 625 × 1625 mm (au-delà de la taille A1). Le chemin arrière (emplacement supérieur) pour les feuilles séparées de papier épais ou un autre support entre 110 × 205 mm et 625 × 1625 mm (au-delà de la taille A1). Le chemin arrière (emplacement inférieur) est utilisé pour lentrée de rouleau. Le dispositif dalimentation en rouleau automatique vous permet de charger du papier en rouleau dans le chemin arrière. Lorsque du papier en rouleau est chargé dans limprimante, il obstrue le chemin papier. Ce type de papier doit donc toujours être déchargé avant dimprimer sur des feuilles séparées (voir page 8). Quelle que soit la façon dont le papier est chargé, il doit toujours être chargé en mode portrait : le bord dattaque du papier doit être le bord le plus court. Les extensions du bac de sortie peuvent être utilisées pour prendre en charge des feuilles de papier pouvant mesurer jusquà 48 cm de long. Pour des feuilles de plus de 48 cm de long, fermez les extensions du bac de sortie et utilisez le bac dentrée déployé pour les prendre en charge lorsquelles sortent de limprimante. chemin avant arrière chemin Comment charger des feuilles de papier ? (Conseils généraux) extensions pour prendre en charge le papier bac dentrée bac de sortie QRG110plusnr.fm Page 2 Wedne sday, February 9, 2005 11:56 AM