HP Color LaserJet CP4005dn User Manual

Configure device menu
The CONFIGURE DEVICE  menu allows you to change the default printing settings, adjust the print
quality, change the system configuration and I/O options, and reset the default settings.
Printing menu
These settings affect only jobs without identified properties. Most jobs identify all of the properties and
override the values set from this menu. This menu can also be used to set default media size and type.
Menu itemValuesDescription
COPIESRange:1 - 32000Allows you to set the...

Menu itemValuesDescription
FONT POINT SIZE
SYMBOL SET
APPEND CR TO LF
SUPPRESS BLANK PAGES
MEDIA SOURCE MAPPINGFONT NUMBER
: The printer assigns a
number to each font and lists the numbers
on the PCL font list. The range is 0 to 999.
FONT PITCH : Selects the font pitch. This
item might not appear, depending on the
font selected. The range is 0.44 to 99.99.
FONT POINT SIZE : Selects the font point
size. This appears only if a font with a
scalable point size is selected as the default
font. The range is...

Menu itemValuesDescription
PRINT TEST PAGE: Prints a test page that
shows the current registration settings.
Source : Allows you to select the tray for
which you want to print the test page. If
installed, optional trays appear as
selections, where [N] is the number of the
tray.
ADJUST TRAY X : Sets the registration fro
the specified tray, where [N] is the number
of the tray. A selection appears for each
tray that is installed, and registration must
be set for each tray.
● X1 SHIFT
: Registration of the...

Menu itemValuesDescription
FUSER TEMP
TRAY 1
RESTORE OPTIMIZE
QUICK CALIBRATE NOW Performs partial printer calibrations.
For more information, see 
Calibrating the
printer.
CALIBRATE NOW Performs all printer calibrations.
For more information, see 
Calibrating theprinter.
COLOR RETOFF
ONThe COLOR RET  menu item allows you to
turn on or turn off the printer REt
(Resolution Enhancement Technology)
setting. The default is  ON.
CLEANING INTERVAL1000
2000
5000
10000
20000Select  CLEANING INTERVAL  to set...

Menu itemValuesDescription
Date/TimeDATE
Date Format
TIME
Time FormatAllows you to set various configurations for
the date format when setting the date and
select a 12-hour or 24-hour clock when
setting time.
SHOW ADDRESSAUTO
OFFThis item determines whether the printer’s
IP address is shown on the display with
the Ready  message. The default is  OFF.
Restrict ColorDISABLE COLOR
ENABLE COLOR
COLOR IF ALLOWEDDisables or restricts color use. The default
is ENABLE COLOR . To use the COLOR IF
ALLOWED...

Menu itemValuesDescription
See Changing printer control panelconfiguration settings for more information.
Sleep Delay1 Minute
15 MINUTES
30 MINUTES
45 MINUTES
60 MINUTES
90 MINUTES
2 HOURS
4 HOURSReduces power consumption when the
printer has been inactive for the selected
period. The default is  30 MINUTES.
WAKE TIMEA list of day and hour variables
appears.When enabled, the default is daily at  7:00
AM . This menu item opens a wizard that
can be used to set the printer wake time.
DISPLAY...

Menu itemValuesDescription
JAM RECOVERYAUTO
OFF
ONSets whether the printer will attempt to
reprint pages after a jam. The default is
AUTO.
RAM DISKAUTO
OFFAllows you to specify how the RAM disk is
configured. When set to  AUTO, the printer
determines the optimal RAM disk size
based on the amount of available memory.
The default is  AUTO. This message
displays in models that do not have a hard
disk installed.
LANGUAGE A listing of available languages
appears.Sets the default language. The default...

Menu itemValuesDescription
printing environment, and return all default
settings to factory defaults.
SLEEP MODEValues are ON and  OFF. Allows you to enable and disable sleep
mode. The default is  ON.
52 Chapter 2   Control panel ENWW
 

Diagnostics menu
The DIAGNOSTICS  menu allows you to run tests that can help you identify and solve problems with
the printer.
Menu itemDescription
PRINT EVENT LOGThis item will print an event log that  will display the last 50 entries in the
printer’s event log, starting with the most recent.
SHOW EVENT LOGThis item displays the last 50 events on the control panel display, starting with
the most recent.
PQ TROUBLESHOOTINGThis item prints a Series of 8 pages that include instructions, pages for each...

Changing printer control panel configuration settings
By using the printer control panel, you can make changes to general printer configuration default settings
such as tray size and type, sleep mode, printer personality (language), and jam recovery.
The printer control panel can also be accessed from a computer by using the Settings page of the
embedded Web server. The computer shows the same information that the control panel shows. For
more information, see 
Using the embedded Web server....