HP CM8050 User Manual

							Set the color quality
1.On the File menu, click Print. 
2. Open the Color/Quality Options menu, and select the Basic tab. 
3. To print in color, select Color Print. Next to Color Quality, select either Professional or General 
Office .
Store jobs
You can store jobs on the device so you can print them at any time. You can share stored jobs with 
other users, or you can make them private. 
1. On the File menu, click Print. 
2. Open the Job Storage menu. 
3. Next to Job Storage Mode, select the type of stored job. 
4. If you selected Stored Job or Personal Job in the previous step and you selected Use PIN To 
Print , type a 4-digit number in the box. When other people attempt to print this job, the device 
prompts them to type this PIN number.
Create and use presets
Use presets to save the current  printer driver settings for reuse. 
Create a preset 
1. On the File menu, click Print. 
2. Select the print settings. 
3. In the Presets box, click Save As..., and type a name for the preset. 
4. Click OK. 
Use presets 
1. On the File menu, click Print. 
2. In the Presets menu, select the preset that you want to use.
NOTE:To use printer-driver default settings, select the Standard preset.
Use watermarks
A watermark is a notice, such as “Confidential,” that is printed in the background of each page of a 
document. 
1. On the File menu, click Print. 
2. Open the Watermarks menu. 
3. Next to Mode, select the type of watermark to use. Select Watermark to print a semi-transparent 
message. Select  Overlay to print a message that is not transparent. 
4. Next to Pages, select whether to print the watermark on all pages or on the first page only. 
ENWW Print from a Macintosh computer 63
 
						

							5.Next to Text, select one of the standard messages, or select Custom and type a new message in 
the box. 
6. Select options for the remaining settings.
NOTE:Transparent watermarks are not available for all applications.
Resize documents 
You can scale a document to fit on a different size of paper. 
1. On the File menu, click Print. 
2. Open the Paper Handling menu. 
3. In the area for Destination Paper Size, select Scale to fit paper size, and then select the size 
from the drop-down list. 
4. If you want to use only paper that is smaller than the document, select Scale down only.
Print on a custom paper size
You can print on a custom paper size. 
1. On the File menu, click Page Setup. 
2. (OS X v10.3) From the Settings drop-down list, select Custom Paper Size, and specify the 
dimensions. 
-or-
(OS X v10.4 and later) From the  Paper Size drop down list, select Manage Custom Sizes, add 
the new size, and then specify the dimensions.
Print a cover page
You can print a separate cover page for your docume nt that includes a message (such as “Confidential”). 
1. On the File menu, click Print. 
2. On the Cover Page pop-up menu, select whether to print the cover page Before document or 
After document . 
3. In the Cover Page Type pop-up menu, select the message that you want to print on the cover 
page.
NOTE: To print a blank cover page, select Standard as the Cover Page Type.
Print on both sides of the paper
You can automatically print on both sides of a page. 
1. Insert enough paper into one of the trays to accommodate the print job. If you are loading special 
paper, see Load special types of paper on page 25 . 
2. On the File menu, click Print. 
64 Chapter 2   Use the device ENWW
 
						

							3.Open the Layout pop-up menu. 
4. Next to Two-Sided, select either Long-Edge Binding or Short-Edge Binding.
NOTE:For OS X v10.5, a default binding value may appear if you had checked Two-Sided first.
Print multiple pages on one sheet of paper
You can print more than one page on a single sheet of paper. This feature provides a cost-effective way 
to print draft pages.
1. On the File menu, click Print. 
2. Click the Layout pop-up menu. 
3. Next to Pages per Sheet, select the number of pages that you want to print on each sheet (1, 2, 
4, 6, 9, or 16). 
4. Next to Layout Direction, select the order and placement of the pages on the sheet. 
5. Next to Border, select the type of border to print around each page on the sheet.
Create booklets
You can copy two pages on one sheet of paper so you can fold the pages in the center to form a booklet. 
The device arranges the pages in the correct order.  For example, if the original document has eight 
pages, the device prints pages 1 and 8 on the same sheet. 
1. On the File menu, click Print. 
2. Open the Finishing menu. 
3. On the Booklet Printing tab, select Format Output As Booklet. 
4. If the last page of the original document should be placed as the back cover of the booklet, select 
Last Page Is Back Cover . 
5. Next to Page Order, select whether the pages should be bound on the left or right edge. 
6. Next to Scaling, select Proportional, or Fit To Page. 
7. Next to Paper For Booklet, select the paper size to use. 
ENWW Print from a Macintosh computer 65
 
						

							Shift images on the page
You can adjust the placement of the image on the page toward any edge. 
1. On the File menu, click Print. 
2. Open the Finishing menu. 
3. On the Image Shift tab, select the appropriate settings. 
● You can adjust the front and back sides independently by specifying measurements for  Front 
Side Shift  and Back Side Shift. 
● You can adjust the front and back sides by the same amount, but in opposite directions. This 
is useful for creating a wider margin along the binding edge. Select  Front Side Shift, specify 
the settings, and then select  Mirror Front Side. 
● Select  Reduce to Fit to shrink the image to accommodate increased margins.
Set the stapling options
If the HP Multifunction Finisher is installed, you can staple documents. 
1. On the File menu, click Print. 
2. Open the Finishing menu, and select Output Bin 5 for the Output Destination. 
3. On the Finishing tab, next to Finishing Options or Staple, select the stapling option that you want 
to use.
Set the color options
Use the  Color/Quality Options menu to control how colors are interpreted and printed from software 
programs. 
1. On the File menu, click Print. 
2. Open the Color/Quality Options menu. 
3. Select the color options that you want to use.
Use the Services menu
If the device is connected to a network, use the Services menu to obtain device and supply-status 
information. 
1. On the File menu, click Print. 
2. Open the Services menu. 
3. Select a maintenance task from the drop-down list, and then click Launch. The embedded Web 
server opens to the page that  provides the information for the task that you selected. 
66 Chapter 2   Use the device ENWW
 
						

							3 Maintain the device
This chapter contains information about the following topics: 
●Replace ink cartridges
●Replace staple cartridges 
●Clean the device 
ENWW 67
 
						

							Replace ink cartridges
The device uses four color ink cartridges and one bonding agent cartridge. The bonding agent adheres 
the ink to the paper and improves  the durability of the printed output. 
A message appears on the control panel whenever a cartridge needs to be replaced. The control-panel 
message tells you which cartridge needs to be replaced. 
An ink cartridge expires twelve months after the date of  installation if it is installed prior to the install-by 
date shown on the ink cartridge package. If it is inst alled after the install-by date, the ink cartridge will 
expire in less than twelve months.
NOTE: The bottom of each cartridge has a unique shape so it fits only into its corresponding slot.
1.Open the ink-cartridge door.
68 Chapter 3   Maintain the device ENWW
 
						

							2.Push the cartridge back and then up to release it, then pull the cartridge straight out.
3.Push the new cartridge straight in until it locks into place.
4.Please return your genuine HP supplies for recycling to Hewlett-Packard. For more information, 
please visit us at www.hp.com/go/recycle .
NOTE:On the Supplies Status Page, the HP logo only appears in front of the supply name when 
genuine HP supplies are used.
ENWW Replace ink cartridges 69
 
						

							Replace staple cartridges
NOTE:The HP Multifunction Finisher is an optional accessory. Other finishers do not have staplers.
A message appears on the control panel whenever a staple cartridge needs to be replaced. The optional 
HP Multifunction Finisher has two staplers. Stapler 1  is on the right, closest to the device. Stapler 2 is 
to the left and above Stapler 1. The control-panel message indicates which stapler is empty.
CAUTION: To avoid injury, do not reach into the device to change the staple cartridge while the device 
is operating.
1. Open the stapler door.
2.To remove the staple cassette, pull forward on the green lever that is on the front of the staple 
cassette, and then pull the staple cassette straight out.
70 Chapter 3   Maintain the device ENWW
 
						

							3.To remove the staple cartridge from the cassette, push in at the arrow on each side and then pull 
up to release the cartridge.
4. Insert the new staple cartridge into the staple cassette. Push the cartridge straight down until it 
snaps into place.
5. Push the staple cassette straight into the slot.
ENWWReplace staple cartridges 71
 
						

							6.Rotate the green lever up until it snaps into place.
7.Close the stapler door. 
72 Chapter 3   Maintain the device ENWW