HP CM8050 User Manual

4.Slide the tray into the device.
5.Configure the tray for the type of paper by responding to the pop-up message that appears on the 
touchscreen when you close the  tray. Or, follow these steps: 
a. From the Home screen, touch Supplies Status. 
b. Touch the Trays tab. 
c. If the type that is listed for the tray is not correct, touch the name of the tray, and then touch 
Modify . 
d. Select the correct paper type, and then touch OK. 
ENWW Load trays 23
 

Load Tray 5
This tray is preconfigured to hold up to 4,000 sheets (8 reams) of either Letter-size or A4-size paper. 
You cannot change this size setting. 
1. Open the Tray 5 top door, and load the paper. Load whole reams at a time. The tray lowers itself 
as you load more paper. 
● Load letterhead or preprinted paper with the printed side face-down and the top edge to the 
right.
NOTE: For duplex printing, load letterhead or preprinted paper with the printed side facing- 
up and the top edge feeding...

Load special types of paper
The following table provides guidelines for loading special types of paper. Use the correct paper-type 
setting in the printer driver to obtain the best print quality.
NOTE: In the Windows printer driver, adjust the paper type on the Paper tab in the Type is drop-down 
list. 
In the Macintosh printer driv er, adjust the paper type on the Finishing tab of the Finishing pop-up 
menu. Select the  Media Type drop-down list.
Table 1-8  Load special paper
Paper typeTray 1 paper...

26 Chapter 1   Device basicsENWW
 

2 Use the device
This chapter contains information about the following topics: 
●Copy
●Fax 
●Send to e-mail
●Send to a network folder
●Job Storage
●Check job status and use the job queue 
●Print from a Windows computer
●Print from a Macintosh computer 
ENWW 27
 

Copy
You can scan original documents by using the document feeder or the scanner glass. The device has 
several options available for customizing copied output.
Copy from the document feeder
The document feeder holds a maximum of 100 sheets of paper. 
1. Place the original document face-up in the document feeder, with the top edge of the document 
toward the rear of the document feeder or feedin g first into the input slot. For two-sided originals, 
place the first side of the original face-up.
NOTE:...

Copy mixed-size originals
You can copy original documents that are printed on different sizes of paper as long as the sheets of 
paper have one common dimension, and that dimensio n is not greater than 297 mm (11.7 inches). For 
example, you could combine Letter and Legal sizes, or you could combine A4 and A5 sizes. 
1. Arrange the sheets in the original document so they all have the same width. 
2. Place the sheets face-up into the document feeder, and adjust the paper-width guides against the...

4.Select the size you wish to scan, and then touch OK. This turns off automatic size detection. 
5. Touch Start Copy 
30 Chapter 2   Use the device ENWW
 

Adjust the copy settings
The device offers several features so you can optimize copied output. These features are all available 
on the  Copy screen. 
The  Copy screen consists of several pages. From the first page, touch More Options to go to the next 
page. Then touch the up or down arrow buttons to scroll to other pages. 
For details about how to use an option, touch the option, and then touch the help () button in the upper- 
right corner of the screen. The following tabl e provides an overview of...

Option nameDescription
Color BalanceUse this feature to adjust colors individually to change the color balance in the copies. For 
example, increasing the amount of cyan  makes copies more blue and less red.
One/Two ColorUse this feature to convert all the colors in a document to shades of a single color, or shades of a single color plus black. For  example, you could convert all colors to varying shades of blue.
OverlaysUse this feature to print a semi-transparent image on each page. Overlays are...