Honeywell Vx9 Manual

							6 - 107
CDMA Network
Information on the CDMA network is displayed. There are no editable parameters on this screen. 
						

							6 - 108
History
The history shows the data volume transferred in a specified time frame. Select the From and To dates to see the data vol-
ume sent/received in the specified period. Tap Reset to reset the counter. 
						

							6 - 109
PIN
You can Activate/Deactivate the PIN or Change the PIN.
Activate/Deactivate PIN
This tab is only displayed when a firmware is loaded that requires a SIM card (such as AT&T or T-Mobile).
By default, you have to enter the PIN each time you start WebToGo OneClick Internet using a modem card. Deactivate 
the PIN to avoid entering the PIN each time.
Change PIN
This dialog lets you change your PIN.
Label Description
 Current PIN  Enter the current PIN.
 New PIN    Enter the new PIN.
 Verify PIN  Verify the new PIN by entering it again. 
						

							6 - 110
Info
This tab displays SIM card, modem and system Information. 
						

							6 - 111
Firmware
OneClick Internet selects the correct Firmware matching your operator automatically, if a special firmware for your operator 
is available and a SIM card is inserted. If no specific firmware for your operator is available, generic firmware is selected. 
After a firmware has been selected, it appears as the Current Profile.
You can manually load your desired firmware. Select a new firmware manually by clicking the Select New Profile drop-
down menu, selecting a firmware from the menu and tapping the Change button to load. To return to automatic firmware 
selection, choose Automatic(UMTS) in the dropdown menu.
Note: Switching between CDMA and UMTS firmware is not done automatically. You must select CDMA firmware manually 
to connect to CDMA networks. If you want to return to UMTS networks, you must manually select UMTS firmware.
Activation on CDMA
When CDMA Firmware is selected, the activation of the modem on the CDMA network starts automatically. During the 
process of loading CDMA firmware, an activation window pop up allowing a choice between Manual Activation and 
Automated Activation. 
If you cancel the activation or if it fails, you can also start the activation manually by pressing the Activate button on the 
General tab. Label Description
Manual Activation  Enter the requested items as direct by a representative from your carrier. 
Automatic Activation  Use your modem to start an automated activation session  
						

							6 - 112
General
Label Description
Auto Launch  When selected OneClick Internet launches automatically when the user starts the Thor VX9 and logs in. 
Connect 
Automatically When selected OneClick Internet automatically connects on start-up. 
Reconnect
Automatically When selected OneClick Internet reconnects automatically when the Thor VX9 returns from standby or 
hibernate. 
Allow roaming  When selected OneClick Internet allows connections in foreign networks.
Note: Use care when enabling roaming to avoid roaming charges.
Roaming Alert When selected OneClick Internet displays an alert when roaming.
Gobi NDIS 
Auto Connect When selected OneClick Internet connects automatically after powering up the operating system and be-
fore the user logs in.  
						

							6 - 113
Application
Use the Application tab to specify any application to launch automatically once the Internet connection is established. Use 
the Browse button to locate the desired application.
Application Buttons
SMS
SMS is not supported on the Thor VX9.
Web Browser
Clicking this button opens the Web Browser and allows the user to surf the Internet once the connection is established. 
The default browser is used, which is Internet Explorer by default on the Thor VX9.
Email
Clicking this button opens the Email application after the connection is established. The Email application is the default 
Email client set in the Control Panel (Start > Control Panel > Internet Options > Programs tab).
GPS
The GPS function is not available on the Thor VX9. 
						

							6 - 114
About
OneClick Internet allows the user to configure the WWAN connection by entering basic setup information. The network con-
nection (service carrier) can be chosen based on the firmware loaded.
Once configured, OneClick Internet allows the user to connect or disconnect from the mobile network. 
System Requirements
OneClick Internet requires:
 Gobi 2000 3G Module (preinstalled by Honeywell)
 Gobi 2000 Driver package (loaded by Honeywell)
Supported Languages
OneClick Internet supports the following languages:
German, English, Spanish, French, Polish, Russian, Italian, simplified Chinese and traditional Chinese.
Note: This does not mean that the Thor VX9 has been localized for these languages.
Installing or Upgrading OneClick Internet
Note: You must use the Honeywell supplied version of OneClick Internet. Do not change versions unless instructed by 
your Honeywell representative.
When ordered with an OS, One Click Internet is pre-installed by Honeywell before the Thor VX9 is shipped.
If you have an installed version of OneClick Internet and need to update to a newer version, you must uninstall the pre-
vious version first by selecting Start > Control Panel and select Add or Remove Programs. Select OneClick Inter-
net and tap Remove. Follow the on screen instructions.
Note: OneClick Internet does not install the drivers for the Gobi 2000 devices. Device drivers are preloaded.
Installation
When you double-click the Installer file for OneClick Internet, it extracts the files to install.
Next, select the application language. By default, the language of the OS is used (if available). 
						

							6 - 115
Review and accept the license agreement. Click Accept, if you agree. Otherwise please click Reject to cancel installa-
tion.
Next the installer asks for the installation directory. Use the Browse button to specify a location other than the default.
Installation process is indicated on screen. When completed. click the Finish button to exit the installer. 
						

							6 - 116
Start OneClick Internet from the Windows Program Menu or double-tap the desktop icon.