Honeywell T775abm Manual

T775A/B/M SERIES 2000 ELECTRONIC STAND-ALONE CONTROLLERS
3162-0254—13
Fig. 74. Schedule - Options Menu.
3.2. OPTIONS
1.From the Schedule menu, use the  and  but-
tons to highlight OPTIONS.
2.Press the 
 button to display the Options menu.
Fig. 75. Schedule - Options - System Time.
3.2.1. SET TIME
Setting the system time is required to enable the 
controller to follow daylight saving time.
IMPORTANT
Set the Date before setting the Time. See “3.2.2. 
SET DATE”.
1.From the Options menu, use the
  and ...

T775A/B/M SERIES 2000 ELECTRONIC STAND-ALONE CONTROLLERS
62-0254—1332
Fig. 77. Schedule - Options - Daylight Saving Time.
3.2.3. DAYLIGHT (daylight saving time)
1.From the Options menu, use the  and  but-
tons to highlight DAYLIGHT.
2.Press the 
 button to display the current system 
setting for daylight saving time.
3.Use the
  and  buttons to select YES or NO.
Default: YES
4.Press the 
 button to accept the value and return 
to the Options menu.
5.From the Options menu, use the Use the
  and 
...

T775A/B/M SERIES 2000 ELECTRONIC STAND-ALONE CONTROLLERS
3362-0254—13
Fig. 79. Schedule - Event 1 Setpoint.
3.3.1. E1 SETPT (setpoint for event 1)
1.From the selected time period menu, use the  and  buttons to highlight E1 SETPT.
2.Press the  button to display the setpoint options.
3.Use the  and  buttons to highlight the desired 
option.
4.Press the 
 button to accept the value and return 
to the selected time period menu.
Fig. 80. Schedule - Event 1 Time.
3.3.2. E1 TIME (time for event 1)
1.From...

T775A/B/M SERIES 2000 ELECTRONIC STAND-ALONE CONTROLLERS
62-0254—1334
SUMMARY MENU
The Summary menu provides the ability to view the 
schedule (E1 and E2 times) for each relay for each day of 
the week.
NOTE: Scheduling must be enabled for the 
Summary menu to display. Enabling the 
schedule is determined in the Setup process 
for the Output Options (see “2.3.3.1. USE 
SCHED” on page 25).
Fig. 81. Summary Example - Monday Settings.
For each relay, the Summary display indicates the time 
and temperature...

T775A/B/M SERIES 2000 ELECTRONIC STAND-ALONE CONTROLLERS
3562-0254—13
SPECIFICATIONS
Power: 24, 120, or 240 Vac; 50/60 Hz; 
A separate earth ground is required for any power source.
Power Consumption: 
• 8 VA maximum at 60 Hz
• 10 VA maximum at 50 Hz
Operating & Storage Temperature Ambient Rating:
• -40° to 125° F (-40° to 52° C) @ 50 Hz
• -40° to 140° F (-40° to 60° C) @ 60 Hz
Relative Humidity: 5% to 95% non-condensing
Relay Contact Output Ratings (N.O. and N.C.):
• 1/2 hp; 9.8 AFL, 58.8 ALR @ 120 Vac...

T775A/B/M SERIES 2000 ELECTRONIC STAND-ALONE CONTROLLERS
Automation and Control Solutions
Honeywell International Inc.
1985 Douglas Drive North
Golden Valley, MN  55422
customer.honeywell.com
® U.S. Registered Trademark
© 2012 Honeywell International Inc.
62-0254—13    M.S.  Rev. 10-12 
Printed in United StatesBy  using  this  Honeywell  literature,  you  agree  that  Honeywell  will  have  no  liability  for  any 
damages arising out of your use or modification to, the literature. You will defend and...