Honeywell Gen 4 User Manual

How to Change  User Codes User  Guide 
Changing  Codes Using User 1 
You should  change  your code  regularly  to prevent  potential  intruders from knowing  your code.  All 
codes  are 4-digits. 
The factory  set code is [0][1][2][3].  User code  I can  only be changed by user 1. 
To change  user code: 

LCD Keypad: o then  [0][1][2][3] 

Press 
0 and  then  enter  your code  [0][1][2][3]. The iil I 

LED goes off to indicate  that you  are in Programming lo>walk Test 

mode.  The first  menu Walk Test...

c-------------­How to Change  User Codes  (contd) i User Guide 
Changing  Codes using User 2 
Your alann system  can have  a second  user code.  You may  find it useful  to set  up user  code  2 for  use  by 
a  neighbour  for use  when  you are on holiday.  User code  2 operates  like user  code 
1, but it cannot  be 
used  to change 
or delete  user code 1. 
To change  user code  2: 
LCD Keypad: 
Press  CD and  then  enter  user 2 [4-digit  code]. The 
III LED goes offto indicate  that you are in...

How to Delete User Code  2 User Guide 
How to Delete  User Code  2 
You can delete the second  code to prevent  it being  used. User 1 or user 2 can  delete  user code  2. 
CD  then  [0][\][2][3] 
To delete  user code  2 using  user code  1 
IO>Walk Test 
I 
LCD Keypad: 
Press CD and then  enter  your code  [0][1][2][3].  The ~ 00 LED goes offto indicate  that you  are in Programming " mode.  The first  menu Walk Test appears on the screen. s>set UpI) I.User 1 Press [8] on the keypad  to enter  User...

@m 
User Guide 
To delete  user code  2 using  user code  2 
LCD Keypad: 
Press CD and  then  enter  the user  2 [4-digit  code].  CD 
then  [4jdigit code] 
The 
til LED  goes offto indicate  that you  are in 
Programming  mode. The first  menu 
Walk Test appears on /o>walk Test 
the screen. 
Press  [8] on the  keypad 
to edit  user  code  2. 

Press 
8 to  delete  user code 2. 

The message Code Deleted  is displayed  on the  screen. 

Press 
® twice  to exit  Programming  mode. The til LED 

comes 
on...

" 
Duress Code User Guide 
Duress  Code 
Your alarm  system  can have  a duress  code. The Duress  code is used in a hold-up  situation  where there 
is  pressure  to set  or unset  the system.  The Duress  code operates  like your  normal  code but in addition  it 
silently  ·sends a signal  to the  Alarm  Receiving  Centre. The operator  at the  ARC  may request  the Police 
to  attend  your premises. 
The  duress  code can only  set up,  edited  and deleted  by the  installer  while in 
Engineer...

I 
1 
How to View  the Event i~g-J User  Guide 
How to View  the Event  Log 
LCD Keypad: 
The event  log gives  a display of all the events  that have  taken  place.  The events  are arranged by date 
and  time.  Up to 250  events  can 
be stored in the memory.  When the log reaches  250 events  and another 
event  takes place,  the oldest  event drops  out. 
To  view  the event  log: 
Press 
eD and  then  enter  your code  [0][1][2][3]. Thew LED eDthen [0][1)[2][3]
goes offto indicate  that you are in...

12345678 @@@@@@@@ (I @--_--@sos @ .... @1iJ 
User  Guide How to Test the Alarm System 
2 = LED Keypad: 
The LED  keypad  is limited  to show  the last  eight  set periods  with the eighth  being the oldest.  Zone, 
sos and../' LEOs are on, to show  zone in alann  . A flashing  LED indicates  the first  zone  in alann. 
00 indicates  the status ofthe  panel  at the  time of the alann. 
Press  CD and  then  enter  your code  [0][1][2][3].  The 
00 LED goes CD then [Q][I][2][3] offand the../' LED...

r-;::------------~-lI ~esting the Alarm System (contd) User Guide 
LCD Keypad: 
Press (P) and  then  enter  your code  [0][1][2][3].  The IilLED 
goes off to indicate  that you  are in Programming  mode. The 
first  menu, 
Walk Test appears  on the  screen. 
Press 
Gi0 for  menu Alarm Test. 
Press  [1] 
or (P) to enter into first  function ON or OFF. 
Press  the 
Gi0 or number  [2] or [3] for  the  other  functions. 
Press 
® to leave  the menu. 
LED keypad 
Press (P) and  then  enter  your code...

How to do a Walk  Test User Guide 
How  to do  a Walk  Test 
Walk around  your property,  and in tum cause  each detector  to go  into  alann.  Also, open and close 
all  door  and windows  that are protected  by the  system.  For each  detector  (including  door or window 
sensor)  that is activated  the system  produces  a series 
of beeps,  and the associated  zone is indicated  on 
the  keypad. 
NOTE: 	Do not  test  any Personal  Attack, Fire or Tamper keys during  the Walk  Test since  these  are...

! How to Set Up tbe  Time & Date J User  Guide 
How to Set  up the  Time  and Date 
LCD Keypad: 
Press  CD and  then  enter  your code  [0][1][2][3].  The Iil 
LED goes off, indicating  that you are in Programming 
mode. 
The  first  menu 
Walk Test  appears  on the  screen. 
Press  [4] and  the 
Time and Date Screen  appears. 
The 
Time can  be modified in hours,  minutes  and seconds 
in the format  HH:MM:SS.  The number  keys on the 
keypad  0-9 are used  for this  function.  As each  digit 
is...