Honeywell Fusion 3 User Manual

							SETUP OPTIONS 
5–27 
 
5.7 SENSOR SETUP 
 The Sensor Window options enable, disable, and configure Sensors. 
 
  
 
1 Sensor/Control 
Name Opens a menu to allow custom naming of controls 
and sensors for easy identification. 
 
2 Sensor Displays the sensor number 
 
3 Type Selects whether the Sensor will be normally open 
(NO) or normally closed (NC). 
 
4 Delay (sec) Once the recording duration has expired, the Delay 
(sec) will wait to reactivate the alarm. 
 
 5  Sensor Preset Sets the sensor preset for camera channels. 
 
6 Hybrid Sensor 
Setup Allows you to configure Hybrid (Network) sensors. 
 
  
 5  6  
						

							FUSION III DVR Digital Recording and Transmission System 
5–28 
 
5.8 NETWORK SETUP 
 
 CAUTION:  Do not join this DVR to a Network Domain. Domains force 
policies that can negatively affect the DVR. More importantly, by default, 
the user must press CTRL-ALT-DEL to login; this Keyboard combination 
is disabled and the software will not be able to load. 
  
 
1 Disable Remote 
Control This setting enables or disables access to the DVR 
from remote connections. 
 
2  Time Out Value When a user attempts to connect to the DVR and the 
connection does not succeed during the timeout 
period designated, the connection will be terminated. 
 
3 Emergency Port The Emergency Port is the port used to connect with 
the Alarm Monitor software. If connecting through a 
firewall, this port must be opened to incoming and 
outgoing traffic. 
 
4 Center Port The Center Port is the port used to connect to the 
Fusion Remote Software. This is the Port that must be 
specified inside the Fusion Remote software to 
connect to the DVR. If connecting through a firewall, 
this port must be opened to incoming and outgoing 
traffic.  
						

							SETUP OPTIONS 
5–29 
 
5 Image Port The Image Port is the port used to transfer the video 
to the Fusion Remote Software. If connecting through 
a firewall, this port must be opened to incoming and 
outgoing traffic.  
 
6 Search Port The Search Port is the port used to transfer the 
Search information to the Fusion Remote Software. If 
connecting through a firewall, this port must be 
opened to incoming and outgoing traffic. 
 
7 Web Function Enables the use of the Web DVR interface as well as 
defines users who can access it. 
 
8 Enable Web Viewer This is the Port that is used by the DVR to transmit 
images through the Internet. 
 
9 Internet Port Allows FVMS to receive information regarding the 
health of the DVR. 
 
10 Enable Health 
Check Sets the port DVR Health information is transmitted 
over. This port must match the port set in FVMS. 
 
11 Quality Adjusts the resolution quality when transferring video 
to a remote client. 
 
12 Resolution Adjusts the resolution of the images being sent to 
remote clients. By setting the resolution low, the 
images will be sent faster, however, the image quality 
will be reduced considerably. When set to Original, full 
quality video will be sent (720 x 480) however this is 
very bandwidth intensive.  
 
13 Transport Rate Throttles the bandwidth on the DVR. This option is 
based on percentages of images sent. 
 
14 View IP Address Allows viewing of the IP configuration of the DVR. 
 
15 PPP Setup 
(Emergency) Defines the modem and PPP information to dial to a 
remote client when an Alarm Monitor Event is 
activated. 
 
16 Enable Audio 
Communication Allows one way audio communication from a remote 
client to the DVR. 
 
17 Upgrade Port Allows communication from a remote client to the 
DVR, allowing upgrades through the specified port. 
 
18 Use Keyboard 
Control Allows use of an RS232 Keyboard  
						

							FUSION III DVR Digital Recording and Transmission System 
5–30 
 
5.9 ADMINISTRATION 
 
 1 Calendar Displays the days with Log information in a bold format. 
 2 User Management Opens the User Management Window to create, edit, 
and delete DVR user accounts. 
 3 Disk Management Gives detailed information on hard drive partitions 
connected to the DVR unit. 
 4 Data Management Allows the user to specify when recording data should 
be checked and deleted. 
 5 End Date Specifies a date to end the Log Export function. 
 6 Start Date Specifies a date to begin the Log Export function. 
 7 Log Export Allows the log file to be exported in weekly increments. 
 8 Storage Check Allows configuration of the storage check and alert 
features of the DVR. 
 9 Log Management Provides basic Log Management options (password 
protected). 
 10 Log Selector Select which log you wish to view. 
 11 Log Display Window Displays the Log Files of the selected day. 
  
						

							SETUP OPTIONS 
5–31 
 
5.9.1 USER MANAGEMENT 
  The User Management Console has options for creating, editing, and deleting user 
accounts. Each user account can be assigned different privileges that limit their usage 
of the DVR system. Users can be given administrator privileges by enabling all rights, 
however only the true administrator account can log into the User Management 
Console 
1 User 
Information Enter the User 
Information and 
Password. 
2 Permission Used to specify 
the types of 
permissions a 
user may perform 
on the DVR. 
3 Hidden 
Camera Allows an 
administrator to 
hide certain 
cameras from a 
user. The user will 
not be able to view 
the cameras in 
Live Mode. 
 
4 User Rank This option 
defines hierarchal 
privileges when 
conflicts arise with 
PTZ and Setup 
access. (one 
being the highest 
priority)  
 5 Select Site (Only used with the Central User Management software). This 
option defines the DVRs to which the User has access. 
 NOTE:. Every DVR comes with an Administrative account and Default account loaded 
on them. The Default account should not be used as the primary account. Upon a 
reboot of the unit for any reason the Default account will automatically be loaded. For 
applications where maximum security is essential, it is recommended that all privileges 
be stripped from the Default user account and all cameras be set to Forbidden. 
  
						

							FUSION III DVR Digital Recording and Transmission System 
5–32 
 
5.9.2 USER RANK 
  The User Ranking structure allows the option to assign a privilege system (1-10 where 
one has the most rights) to users of the DVR. For example. Since only one user is 
allowed to use the PTZ controls at any one time, an administrator with a higher rank 
can kick another user out and take control of the PTZ.  
 
The User Rank option affects: 
 
SETUP ACCESS Each DVR can only have 1 user accessing Setup at 
any given time. A user with a higher rank will kick 
another user out and then open Setup.  
 
PTZ CONTROL Each DVR can only have 1 user using the PTZ 
controls at any given time. A user with a higher rank 
will kick another user out and then open the PTZ 
controls.  
 
  
5.9.3  CHANGING THE ADMINISTRATOR PASSWORD 
  1.  Inside Setup, open the user management console. An administrator login will 
appear with a Change Password button near the bottom right of the window. 
  2.  Select the Change Password button, then enter the new password and press  
OK to finish. 
  
						

							SETUP OPTIONS 
5–33 
 
5.9.4 STORAGE CHECK 
 
5.9.4.1 General 
  
1 Enable  
E-mail Alarm Enables an E-mail 
to be sent upon an 
alarm. 
2 Send User Used to specify 
the sender 
information. 
3 Primary 
SMTP 
Setting This option 
defines the 
settings for Simple 
Mail Transfer 
Protocol (SMTP) 
 
4 Secondary 
SMTP Defines a 
secondary SMTP. 
 
 
 1  2 
 3  4  
						

							FUSION III DVR Digital Recording and Transmission System 
5–34 
 
5.9.4.2 Users 
  
1 E-mail list List of E-mail 
recipients during a 
hard drive alarm 
event. 
2 Event Specifies the 
event that will 
trigger E-mails. 
Registration Enters a user 
name and e-mail 
address into the 
E-mail recipient 
list. 
 
3 
Note: A separate email notification 
for the same email address must 
be set for HDD Check, Recording 
Data Check and Alarm Event if you 
wish to receive each. 
 
5.9.4.3 Storage
 Check 
  
1 Storage 
Check Every Sets amount of 
time between 
storage checks 
2 Check Alert 
Option Specifies the 
event that will 
trigger E-mails. 
 
3 Log file 
overwrite 
option Specifies the Log 
file size, whether 
to overwrite old 
logs and when to 
delete old logs.  1  2  3 
 1  3  2  
						

							SETUP OPTIONS 
5–35 
 
5.9.4.4  Recording Data Check 
  
1 Recording 
Data check Enables the 
recording data 
check. 
2 Schedule Specifies the time 
between recording 
data checks. 
 
3 Alert Specifies the type 
of alert upon a 
recording data 
check alarm. 
 
5.9.4.5 Alarm Event 
  
1 Use Email 
Alarm Sets amount of 
time between 
storage checks 
2 Schedule Specifies the time 
between recording 
data checks. 
 
3 Motion/Sens
or Alerts Specifies the type 
of alert upon a 
recording data 
check alarm. 
 1  3  2 
 1  2  3  
						

							FUSION III DVR Digital Recording and Transmission System 
5–36 
5.10 SITE INFORMATION 
 
This screen displays various information about your DVR. 
 
   
 
 
 
 
 
 
1 Decoder Displays decoder information. 
 
2 Video Format Displays Video Format (NTSC/PAL) of the DVR. 
 
3  DVR Server Version Displays the software version on the DVR. 
 
4 Site Code User-specified unique identification name that is used 
by other DVR software to connect to the DVR. 
 
5  DVR Serial Number Displays the serial number of the DVR. 
 
6 CBSN Displays the serial number of an internal hardware 
component inside the DVR. 
 
7 Drive Information Displays the Total Space and Free Space of the 
drives installed in the DVR. 
 
8 Telephone Number Displays user-specified contact numbers. 
 
9 Notes Enter any notes about the DVR.