Honeywell Fusion 3 User Manual

							   
NOTES ON CLEANING 
•  Use a soft dry cloth for cleaning. 
•  For stubborn dirt, soak the cloth in a weak detergent solution, wring well and wipe. Use a dry cloth 
to wipe it dry. Do not use any type of solvent, such as thinner and benzene, as they may damage 
the surface of the DVR unit. 
•  If you use a chemical saturated cloth to clean the unit, follow that product’s instructions. 
 
NOTES ON MAINTENANCE 
This DVR unit is designed to last for long periods of time. To keep your DVR unit always operational we 
recommend regular inspection maintenance (cleaning parts or replacement). For details contact your 
nearest dealer. 
 
NOTES ON MOISTURE CONDENSATION 
Moisture condensation damages the DVR unit. Read the following information carefully. 
Moisture condensation occurs during the following cases: 
•  When you bring the DVR unit directly from a cold place to a warm place. 
•  When you use the DVR unit in a room where you just turned on the heater, or a place where the 
cold wind from the air conditioner directly hits the unit. 
•  In the summer, when you use the DVR unit in a hot and humid place just after you move the unit 
from an air conditioned room. 
•  When you use the DVR unit in a humid place. 
 
Do not use the DVR unit when moisture condensation may occur. 
If you use the DVR unit in such a situation, it may damage discs and internal parts. Remove any CD 
discs, connect the power cord of the DVR unit to the wall outlet, turn on the DVR unit, and leave it for 
two to three hours. After two to three hours, the DVR unit will have warmed up and evaporated any 
moisture. Keep the DVR unit connected to the wall and moisture will seldom occur. 
 
  
						

							   
WARNING 
 
TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN 
OR MOISTURE.  
DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE.  
DO NOT OPEN THE CABINET.  
REFER SERVICING TO QUALIFIED PERSONNEL ONLY. 
CAUTION 
 
CAUTION:  TO REDUCE THE RISK OF ELECTRIC SHOCK, 
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
 
EXPLANATION OF GRAPHICAL SYMBOLS 
   
 
 The lightning flash with arrowhead symbol, within an equilateral triangle, is 
intended to alert the user to the presence of uninsulated dangerous voltage 
within the products enclosure that may be of sufficient magnitude to constitute 
a risk of electric shock to persons. 
  
 
 
 The exclamation point within an equilateral triangle is intended to alert the user 
to the presence of important operating and maintenance (servicing) instruction 
in the literature accompanying the product. 
  
 
 
The circle with inward pointing arrows is intended to alert the user to the 
presence of sensitive electronic components susceptible to Electro Static 
Discharge. The utmost care should be exercised in ensuring proper grounding 
before handling these components. 
   
						

							 
 
 
TABLE OF CONTENTS 
SECTION 1 INTRODUCTION ..................................................................................... 1–1 
1.1 PRODUCT DESCRIPTION ........................................................................................................ 1–1 
1.2 FEATURES................................................................................................................................. 1–2 
SECTION 2 CONTROLS AND CONNECTIONS ........................................................ 2–1 
2.1 BASIC FEATURES ..................................................................................................................... 2–1 
2.2 FRONT PANEL CONTROLS AND LEDS .................................................................................. 2–2 
2.3 REAR PANEL CONNECTORS .................................................................................................. 2–3 
SECTION 3 GETTING STARTED............................................................................... 3–1 
3.1 IDENTIFYING INCLUDED COMPONENTS .............................................................................. 3–1 
3.2 KEYBOARD SETUP ................................................................................................................... 3–2 
3.3 MOUSE SETUP.......................................................................................................................... 3–2 
3.4 MONITOR SETUP ...................................................................................................................... 3–3 
3.5 POWER SETUP ......................................................................................................................... 3–3 
3.6 CONNECTING A VIDEO SOURCE TO THE DVR.................................................................... 3–4 
3.7 LOOPING OUTPUTS ................................................................................................................. 3–5 
3.8 LOOPING OUTPUT TERMINATION.......................................................................................... 3–6 
3.9 CONNECTING SENSORS TO THE DVR .................................................................................. 3–6 
3.10 CONNECTING CONTROL OUTPUTS TO THE DVR................................................................ 3–7 
3.11 CONNECTING A 16 CHANNEL AUDIO OCTOPUS CABLE .................................................... 3–8 
3.12 OPTIONAL COMPONENTS....................................................................................................... 3–8 
SECTION 4 DVR BASICS .......................................................................................... 4–1 
4.1 TURNING ON THE DVR ............................................................................................................ 4–1 
4.2 TURNING OFF THE DVR .......................................................................................................... 4–1 
4.3 NVR/HVR UPGRADE AND REGISTRATION ............................................................................ 4–1 
4.3.1 OBTAINING THE UNLOCK CODE......................................................................................... 4–2 
4.3.2 UNLOCKING YOUR NEW NETWORK DEVICE.................................................................... 4–4 
4.4 DISPLAY SCREEN..................................................................................................................... 4–5 
4.5 CAMERA VIEW .......................................................................................................................... 4–6 
4.6 RECORDING STATUS INDICATOR.......................................................................................... 4–7 
4.7 SCREEN DIVISION MENU ........................................................................................................4–8 
SECTION 5 SETUP OPTIONS ................................................................................... 5–1 
5.1 SETUP OVERVIEW ................................................................................................................... 5–1 
5.1.1 SETUP SCREEN OVERVIEW................................................................................................ 5–1 
5.2 CAMERA SETUP ....................................................................................................................... 5–2 
5.2.1 CONNECTING A NETWORK DEVICE................................................................................... 5–3 
5.3 MOTION ..................................................................................................................................... 5–4 
5.3.1 CREATING A MOTION AREA................................................................................................ 5–5 
5.3.2 REMOVING A MOTION AREA............................................................................................... 5–5 
5.3.3 REGULAR INTERVAL RECORDING..................................................................................... 5–6 
5.4 GENERAL SETUP...................................................................................................................... 5–7 
5.4.1 VOICE WARNING................................................................................................................... 5–8 
5.4.2 INTENSIVE RECORDING OVERVIEW................................................................................. 5–9 
5.4.3 HOW TO USE INTENSIVE RECORDING.............................................................................. 5–9 
5.4.4 VIDEO LOSS ALARM........................................................................................................... 5–10  
						

							  5.4.5
 AUDIO RECORDING............................................................................................................ 5–11 
5.5 FRAME SETUP ........................................................................................................................ 5–12 
5.5.1 FRAME SETUP (HIGH-END)............................................................................................... 5–12 
5.5.2 FRAME SETUP (LOW-END)................................................................................................ 5–14 
5.6 RECORDING SCHEDULE....................................................................................................... 5–16 
5.6.1 DAY OF THE WEEK............................................................................................................. 5–18 
5.6.2 CREATING A SIMPLE SCHEDULE (BY EXAMPLE)........................................................... 5–18 
5.6.3 SCHEDULING SENSORS AND RELAYS (BY EXAMPLE)................................................. 5–22 
5.6.4 VERIFYING A RECORDING SCHEDULE........................................................................... 5–26 
5.7 SENSOR SETUP...................................................................................................................... 5–27 
5.8 NETWORK SETUP ..................................................................................................................5–28 
5.9 ADMINISTRATION ................................................................................................................... 5–30 
5.9.1 USER MANAGEMENT......................................................................................................... 5–31 
5.9.2 USER RANK......................................................................................................................... 5–32 
5.9.3 CHANGING THE ADMINISTRATOR PASSWORD............................................................. 5–32 
5.9.4 STORAGE CHECK............................................................................................................... 5–33 
5.10 SITE INFORMATION................................................................................................................ 5–36 
5.11 PTZ ........................................................................................................................................... 5–37 
5.12 INSTANT RECORDING........................................................................................................... 5–37 
5.13 ADJUSTING THE TIME, DATE, AND TIME ZONE................................................................. 5–38 
5.14 CENTRAL USER MANAGEMENT (OPTIONAL) ..................................................................... 5–39 
5.14.1 SITE MANAGEMENT........................................................................................................... 5–41 
5.14.2 USER MANAGEMENT......................................................................................................... 5–42 
5.14.3 SELECT SITE....................................................................................................................... 5–43 
5.14.4 SETTING UP THE CENTRAL MANAGEMENT USER SERVER........................................ 5–43 
5.14.5 ENABLING A DVR TO USE CENTRAL USER MANAGEMENT......................................... 5–44 
SECTION 6 SEARCH OPTIONS ................................................................................ 6–1 
6.1 SEARCH OVERVIEW ................................................................................................................6–1 
6.2 PLAY CONTROLS...................................................................................................................... 6–3 
6.3 HOUR / MINUTE SELECTOR .................................................................................................... 6–3 
6.4 BRIGHTNESS / SPEED / ZOOM ............................................................................................... 6–4 
6.4.1 ADJUSTING THE BRIGHTNESS OF AN IMAGE.................................................................. 6–4 
6.4.2 ZOOMING IN ON AN IMAGE................................................................................................. 6–4 
6.4.3 ZOOMING IN ON A PORTION OF AN IMAGE...................................................................... 6–4 
6.5 AFTER IMAGE REMOVAL......................................................................................................... 6–5 
6.6 SEARCH OPTIONS OVERVIEW ............................................................................................... 6–6 
6.7 PERFORMING A BASIC SEARCH ............................................................................................ 6–6 
6.8 DAYLIGHT SAVINGS TIME ....................................................................................................... 6–7 
6.9 TIME SYNC ................................................................................................................................ 6–7 
6.10 PRINTING AN IMAGE ................................................................................................................ 6–8 
6.11 ‘SAVE TO’ FUNCTION ............................................................................................................... 6–8 
6.12 SINGLE CLIP BACKUP............................................................................................................ 6–10 
6.13  INDEX SEARCH................................................................................................................... 6–11 
6.13.1 PERFORMING AN INDEX SEARCH.................................................................................... 6–11 
6.14  PREVIEW SEARCH.............................................................................................................. 6–13 
6.14.1 PERFORMING A PREVIEW SEARCH................................................................................. 6–14 
6.15  OBJECT SEARCH ................................................................................................................ 6–15 
6.15.1 PERFORMING AN OBJECT SEARCH................................................................................ 6–17 
6.16  STATUS SEARCH ................................................................................................................ 6–18 
6.16.1 PERFORMING A STATUS SEARCH................................................................................... 6–19 
6.17 AUDIO ...................................................................................................................................... 6–19 
6.18 POINT OF SALE (OPTIONAL) ................................................................................................. 6–20  
						

							 
SECTION 7 PAN / TILT / ZOOM................................................................................. 7–1 
7.1 PAN / TILT / ZOOM OVERVIEW................................................................................................ 7–1 
7.2 SETTING UP A PTZ CAMERA (120IPS RealTime / 240IPS / 480IPS) ..................................... 7–1 
7.2.1 SUPPORTED PROTOCOLS.................................................................................................. 7–3 
7.3 SETTING UP A PTZ CAMERA (60IPS /120IPS) ....................................................................... 7–4 
7.4 ADVANCED PTZ SETUP........................................................................................................... 7–5 
7.5 CREATING AND VIEWING PRESET POSITIONS.................................................................... 7–7 
7.5.1 CREATING A PRESET........................................................................................................... 7–8 
7.5.2 VIEWING A PRESET.............................................................................................................. 7–8 
7.6 UNDERSTANDING TOURS....................................................................................................... 7–9 
7.6.1 CREATING A PRESET TOUR............................................................................................. 7–10 
7.6.2 VIEWING THE PRESET TOUR............................................................................................ 7–10 
7.6.3 CREATING A PRESET TOUR2........................................................................................... 7–10 
7.6.4 VIEWING THE PRESET TOUR2.......................................................................................... 7–10 
7.6.5 CREATING A MIMIC TOUR................................................................................................. 7–11 
7.6.6 VIEWING THE MIMIC TOUR............................................................................................... 7–11 
7.6.7 PTZ TOUR SCHEDULING................................................................................................... 7–12 
7.7 PTZ STATUS ON CLOSE ........................................................................................................ 7–13 
7.7.1 ACTIVATING THE PTZ STATUS ON CLOSE OPTION....................................................... 7–13 
7.8 PTZ ADDRESS SETTING........................................................................................................ 7–14 
7.8.1 ACTIVATING THE PTZ STATUS ON CLOSE OPTION....................................................... 7–14 
7.9 ACCESSING PTZ Menus......................................................................................................... 7–15 
7.9.1 OPENING AND EDITING THE HONEYWELL KD6 MENU.................................................. 7–15 
7.10 USING THE ON-SCREEN CONTROLLER AND COMPASS .................................................. 7–16 
7.10.1 THE PTZ CONTROLLER..................................................................................................... 7–17 
7.10.2 AUX BUTTONS..................................................................................................................... 7–18 
SECTION 8 BACKING UP VIDEO DATA................................................................... 8–1 
8.1 BACKUP OVERVIEW................................................................................................................. 8–1 
8.2 NERO® EXPRESS..................................................................................................................... 8–1 
8.3 BACKUP CENTER OVERVIEW................................................................................................. 8–2 
8.3.1 GENERAL SCREEN OVERVIEW.......................................................................................... 8–2 
8.3.2 CLIP SCREEN OVERVIEW.................................................................................................... 8–4 
8.4 PERFORMING A REGULAR BACKUP...................................................................................... 8–5 
8.5 PERFORMING A CLIP BACKUP ............................................................................................... 8–5 
8.6 PERFORMING A SCHEDULE BACKUP ................................................................................... 8–6 
8.6.1 SPECIFYING SCHEDULED BACKUP DRIVES..................................................................... 8–6 
8.7 ENABLING SCHEDULED BACKUP .......................................................................................... 8–7 
SECTION 9 LAN / ISDN / PSTN CONNECTIONS...................................................... 9–1 
9.1 LAN OVERVIEW ........................................................................................................................ 9–1 
9.2 CONNECTING TO A LAN USING TCP/IP ................................................................................. 9–1 
9.2.1 CONFIGURING TCP/IP SETTINGS....................................................................................... 9–2 
9.2.2 CONNECTING THE DVR TO A LAN...................................................................................... 9–2 
SECTION 10 DIGITAL SIGNATURE VERIFIER ......................................................10–1 
10.1 DIGITAL VERIFIER .................................................................................................................. 10–1 
10.2 INSTALLING THE DIGITAL VERIFIER .................................................................................... 10–1 
10.3 USING THE DIGITAL VERIFIER ............................................................................................. 10–2 
SECTION 11 PROPRIETARY VIEWER ...................................................................11–1 
11.1 PROPRIETARY VIEWER OVERVIEW .................................................................................... 11–1 
11.2 INSTALLING THE PROPRIETARY VIEWER.......................................................................... 11–2  
						

							  11.3
 LOADING VIDE0 FROM CD-ROM OR HARD DRIVE............................................................. 11–3 
SECTION 12 ALARM MONITOR.............................................................................. 12–1 
12.1 ALARM MONITOR OVERVIEW ............................................................................................... 12–1 
12.2 INSTALLING THE ALARM MONITOR ..................................................................................... 12–1 
12.3 CONFIGURING THE DVR ....................................................................................................... 12–2 
12.4 CONFIGURING THE CLIENT PC ............................................................................................ 12–3 
12.5 ALARM MONITOR WINDOW .................................................................................................. 12–4 
12.5.1 EVENT LIST RIGHT CLICK.................................................................................................. 12–5 
12.6 SEARCH ALARM WINDOW .................................................................................................... 12–6 
12.7 CONFIGURATION WINDOW................................................................................................... 12–7 
SECTION 13 REMOTE SOFTWARE........................................................................ 13–1 
13.1 FUSION REMOTE SOFTWARE OVERVIEW.......................................................................... 13–1 
13.1.1 REMOTE CLIENT MINIMUM REQUIREMENTS................................................................. 13–2 
13.1.2 REMOTE CLIENT RECOMMENDED REQUIREMENTS..................................................... 13–2 
13.2 SETTING UP THE SERVER TO ACCEPT INCOMING CONNECTIONS ............................... 13–3 
13.2.1 CONFIGURING THE DVR SERVER TO ACCEPT REMOTE CONNECTIONS.................. 13–3 
13.3 SETTING UP THE FUSION REMOTE SOFTWARE ............................................................... 13–4 
13.3.1 INSTALLING THE FUSION REMOTE SOFTWARE............................................................ 13–4 
13.3.2 CREATING A NEW REMOTE CONNECTION..................................................................... 13–5 
SECTION 14 THE WEB VIEWER............................................................................. 14–1 
14.1 WEB VIEWER OVERVIEW ...................................................................................................... 14–1 
14.1.1 CONFIGURING THE DVR SERVER TO ACCEPT REMOTE CONNECTIONS.................. 14–2 
14.1.2 CONNECTING TO A DVR WITH THE WEB VIEWER......................................................... 14–3 
14.1.3 CLOSING THE WEB VIEWER............................................................................................. 14–3 
SECTION 15 TECHNICAL SPECIFICATIONS......................................................... 15–1 
15.1 FUSION III 8-CHANNEL...........................................................................................................15–1 
15.2 FUSION III 16-CHANNEL......................................................................................................... 15–2 
15.3 FUSION III 32-CHANNEL......................................................................................................... 15–3