Honeywell Fusion 3 User Manual

 
13–1 
SECTION 13 
REMOTE SOFTWARE 
13.1  FUSION REMOTE SOFTWARE OVERVIEW 
  The DVR unit was specifically designed to be fully operated and maintained remotely. 
It connects using the standard TCP/IP protocol thorough connection types such as 
DSL, Cable Modem, T1, ISDN, 56K Modem, LAN, and more. The Fusion Remote 
software provides for viewing live video, searching through archived video, exporting 
images and video clips; and provides virtually full Setup control. 
 
Highlights:
 
 
•  Search...

FUSION III DVR Digital Recording and Transmission System 
13–2 
 
13.1.1 REMOTE CLIENT MINIMUM REQUIREMENTS 
 
•  Pentium 233 or equivalent 
 
•  32MB System Memory 
 
•  DirectX 8 or higher 
 
•  Compatible video card (ATI Preferable) 
 
•  Internet or LAN Connection (56K, DSL, Cable Modem, T1, ISDN, etc.) 
 
• TCP/IP installed 
 
•  Microsoft® Windows® 98, Me, 2000, or XP Operating System 
 
•  1024 x 768 display resolution 
 
•  16 Bit color depth or better 
  
13.1.2 REMOTE CLIENT RECOMMENDED...

REMOTE SOFTWARE 
13–3 
 
13.2  SETTING UP THE SERVER TO ACCEPT INCOMING CONNECTIONS 
  In order to access the DVR unit remotely, the DVR Server must be setup to allow 
remote connections.  
 
 
    1   
  2   
  3   
  4   
  5   
 
  
 
1 Disable Remote 
Control Enables/Disables acceptance of remote connections by 
the DVR server. 
 
2  Time Out Value Specifies a value (in seconds) to wait for a signal from 
the Fusion Remote Client. If a signal is not received by 
that time, the connection is dropped....

FUSION III DVR Digital Recording and Transmission System 
13–4 
 
13.3  SETTING UP THE FUSION REMOTE SOFTWARE 
 
13.3.1 INSTALLING THE FUSION REMOTE SOFTWARE 
  1.  On the Client computer, insert the Honeywell Fusion Software CD into the  
CD-ROM. The CD should play automatically. 
  2.  When prompted, select the Install Fusion Remote Software option. 
Follow the installation instructions carefully. 
  3.  When the software finishes installing, close any open installation windows.  

REMOTE SOFTWARE 
13–5 
 
13.3.2 CREATING A NEW REMOTE CONNECTION 
 
 1 
 2 
 3 
 4 
 5 
 6  7 
 8 
 
 
1 New Creates a new site to connect to. 
 
2 Delete Deletes the selected site once it is selected from the list. 
 
3 Delete All Deletes all listed sites. 
 
4 Edit Used to edit a site once it is selected from the list. 
 
5 Password Enter the logon password. 
 
6 Connect Connects the Fusion Remote Client to the Server. 
 
7 User Enter the Login Username. 
 
8 Site Displays a list of pre-configured...

FUSION III DVR Digital Recording and Transmission System 
13–6 
 
NOTES: 
 
 
  

 
14–1 
SECTION 14 
THE WEB VIEWER 
14.1  WEB VIEWER OVERVIEW 
  The DVR unit allows access to the video using Microsoft® Internet Explorer® Browser 
5.5 and later 
 
Highlights:
 
 
•  View Live Video from most computers   
 
•  Username and Password protected 
 
•  Easy to use graphical interface 
 
Basics:
 
 
75 users can access the Web DVR simultaneously. The Web DVR is an easy secure 
way to view live video from virtually any computer with an internet connection using 
Microsoft Internet Explorer....

FUSION III DVR Digital Recording and Transmission System 
14–2 
 
 
 
 
1 Screen Division 
Buttons Allows view of one or more sets of cameras at a time. 
They are organized in several different groups such as 
1x1, 4x4, and 8x8. 
 
2 GO!  Activates the commands  
 
3 Camera Buttons Enable or disable selected cameras for use when 
searching. 
 
14.1.1 CONFIGURING THE DVR SERVER TO ACCEPT REMOTE CONNECTIONS 
 1. Enter Setup on the DVR unit. 
 2. Open the Network menu. 
 3. Uncheck the Disable Remote...

THE WEB VIEWER 
14–3 
14.1.2 CONNECTING TO A DVR WITH THE WEB VIEWER 
  1.  Open Microsoft® Internet Explorer® 5.5 or later. 
  2.  Enter the IP address of the DVR into the Address Bar. 
  3.  When attempting this for the first time a window will open and ask for approval to  
accept an Active X installation. Select Yes to this. 
NOTE:   If a message is received saying your Internet Explorer® security settings do 
not allow for downloading Active X components then adjust the browser 
security settings....

FUSION III DVR Digital Recording and Transmission System 
14–4 
NOTES: