Honeywell Fusion 3 User Manual

PAN / TILT / ZOOM 
7–13 
 
7.7  PTZ STATUS ON CLOSE 
 The PTZ Status on Close is an option that defines the default settings for a PTZ 
camera when the controller is not open. This includes activating a Tour, moving to a 
preset position or simply leaving the camera as it.  
  
 
 
Stay Put This option leaves the PTZ in its present state.  
 
Start Tour Starts the Pre-Defined Tour function when the on-screen PTZ 
controller is closed. The Tour that will be activated will be the Tour 
that is selected....

FUSION III DVR Digital Recording and Transmission System 
7–14 
 
7.8  PTZ ADDRESS SETTING 
  Some protocols support software address settings. The following section explains 
these settings.  
 
 
 
RX Address 1 This option was added for a particular line of receivers that support 2 
ID addresses. This is the first RX address.  
 
RX Address 2 This option was added for a particular line of receivers that support 2 
ID addresses. This is the second RX address.  
 
Previous ID This option was added for a...

PAN / TILT / ZOOM 
7–15 
 
7.9  ACCESSING PTZ Menus 
  Some protocols support the ability to access the Internal PTZ Onscreen Menu.  
 
 
Camera Menu This option opens the PTZ Camera menu.  
 
Select This option selects an item on the Onscreen menu. 
 
Close This option closes the PTZ Onscreen menu.  
 
 
 
Up/down The Up and Down buttons on the PTZ controller move through the 
PTZ menu options.  
 
Left/Right The Left and Right buttons on the PTZ controller move through the 
PTZ menu options and/or...

FUSION III DVR Digital Recording and Transmission System 
7–16 
 
7.10  USING THE ON-SCREEN CONTROLLER AND COMPASS 
  The Fusion DVRs provide control for the PAN/TILT camera in two different ways. 
1.  Using the Graphical PTZ controller that appears when the PTZ button is 
pressed on the main screen.  
2.  Clicking on the video itself. This second option is a much more powerful way to 
control the Camera. (NOTE: The PTZ button on the main screen must also be 
selected to use this option.)...

PAN / TILT / ZOOM 
7–17 
 
7.10.1 THE  PTZ  CONTROLLER 
 
 3 
 2
 1 
 6 
 5
 4 
 7 
  10 
  
 9 
  
  8 
  
 11
 
 
 1 Direction Controls There are 8 directions buttons that move the PTZ. 
NOTE: Only 4 of the buttons work for all protocols 
(UP, DOWN, LEFT, RIGHT). 8 Directions are 
available only for select protocols. 
 2 Zoom This option Zooms the camera in and out. 
 3 Focus This option Focuses the PTZ camera. 
 4 Iris This option adjusts the Iris on the PTZ. 
  5  Preset 1 Tour This option activates...

FUSION III DVR Digital Recording and Transmission System 
7–18 
 
7.10.2 AUX  BUTTONS 
  The AUX buttons activate different options for each protocol. The protocols and their 
options are defined below.  
AUX 1  Auto Iris 
 
VCL, 
Ademco Rapid Dome, 
Javelin (Orbitor), 
HONEYWELL KD6 AUX 2  Auto Focus 
AUX 1  Wiper  
Pelco-D, 
Pelco-P, 
Kodicom Receiver, 
CBC, 
Dennard 
HONEYWELL KD6 AUX 2  Light 
    
 
 
  

 
8–1 
SECTION 8 
BACKING UP VIDEO DATA 
8.1 BACKUP OVERVIEW 
  The DVR can easily backup important video data to an internal or external media 
location. The most commonly used forms of this are CD-R/RWs, External USB or 
FireWire Hard Drives, and Network Drives. Every DVR unit comes standard equipped 
with a CD-RW drive, FireWire port, USB port, and Network Adapter. 
  The DVR is capable of performing a backup to multiple CDs when the file sizes exceed 
the capacity of a single disk. You may also...

FUSION III DVR Digital Recording and Transmission System 
8–2 
 
8.3 BACKUP CENTER OVERVIEW 
  The Backup Center allows you to back up recorded video data from multiple dates and 
times to one or more locations including the CD-RW drive, Network Storage Locations, and 
External Hard Drives. 
  
8.3.1 GENERAL SCREEN OVERVIEW 
  The General Screen is used for performing bulk backup of video recorded by all cameras for 
a selected period or periods of time to a specified storage location.  
 
 
1  Hour /...

BACKING UP VIDEO DATA 
8–3 
 
7 Backup Order Allows setting of the order in which drives are used for 
backing up data to. 
 
8 Select Backup 
Media Allows selection of drives and folders to back up video to. 
 
9 Include Viewer When checked, copies the Backup viewer application onto 
the CD or DVD being used for backup and sets the disc to 
auto run the viewer. 
 
10 Fixed HDD When checked, displays all hard drives on the system. 
 
11 Backup Status Displays the size of all video currently selected for...

FUSION III DVR Digital Recording and Transmission System 
8–4 
 
8.3.2  CLIP SCREEN OVERVIEW 
 
CLIP SCREEN OVERVIEW 
The Clip Screen is used for backing up video recorded by individual cameras for a selected 
period of time to a specified storage location. 
 
 
 1  Description  Enter information to be stored and displayed with the 
backup. 
 
 2  Backup Drive Selects the drive to backup video to. 
 
 3  Time Setup Sets the start time and stop time of video being backed up. 
 
 4  Include Viewer When...