Honeywell 20205 Manual

A - 3
ASCII Conversion Chart (Code Page 1252)
Note: This table applies to U.S. style keyboards.  Certain characters may differ 
depending on your Country Code/PC regional settings.
Non-Printable Characters
DECHEXCharacter (Code)DECHEXCharacter (Code)
00NULL1610DATA LINK ESCAPE (DLE)
11START OF HEADING 
(SOH)1711DEVICE CONTROL 1 (DC1)
22START OF TEXT (STX)1812DEVICE CONTROL 2 (DC2)
33END OF TEXT (ETX)1913DEVICE CONTROL 3 (DC3)
44END OF TRANSMISSION 
(EOT)2014DEVICE CONTROL 4 (DC4)
55END OF QUERY...

A - 4
4028(7248H10468h
4129)7349I10569i
422A*744AJ1066Aj
432B+754BK1076Bk
442C,764CL1086Cl
45 2D-774DM1096Dm
462E.784EN11 06En
472F/794FO1116Fo
483008050P11 270p
493118151Q11 371q
503228252R11 472r
513338353S11 573s
523448454T11 674t
533558555U11 775u
543668656V11 876v
553778757W11 977w
563888858X12078x
573998959Y12179y
583A:905AZ1227Az
593B;915B[1237B{
603C945E^1267E~
633F?955F_1277F
Extended ASCII Characters
DECHEXCharacter DECHEXCharacterDECHEXCharacter
12880€
€171AB«214D6Ö
12981172AC¬215D7×...

A - 5
Code Page Mapping of Printed bar codes
Code pages define the mapping of character codes to characters.  If the data 
received does not display with the proper characters, it may be because the bar 
code being scanned was created using a  code page that is different from the 
1408CŒ183B7·226E2â
1418D184B8¸227E3ã
1428EŽ185B9¹228E4ä
1438F186BAº229E5å
14490187BB»230E6æ
14591‘188BC¼231E7ç
14692’189BD½232E8è
14793“190BE¾233E9é
14894”191BF¿234EAê
14995192C0À235EBë
15096–193C1Á236ECì
15197—194C2Â237EDí...

A - 6
one the host program is expecting.  If this is the case, select the code page with 
which the bar codes were created.  The data characters should then appear 
properly.
Note: The Code Page option is available for Code 39, Code 93, and Code 128.
Code Page Standard Description
1CP ISO646
2 (Default) ISO 2022 Automatic National Replacement 
Characters
3 CP Binary
82 ISO 2022 11 Swe Swedish Replacement Characters
83 ISO 2022 69 Fra French/Belgium Replacement Charac-
ters
81 ISO 2022 25 Fra...

B - 1
B
Minimizing Bluetooth/ISM Band 
Network Activity
The settings described below can help you customize the re-linking behavior of 
the cordless linear imaging system to obtain the best compromise between 
convenience and low interference.
Note: ISM band refers to the 2.4 to 2.48 GHz frequency band used by wireless 
networks, cordless phones, and Bluetooth.
Auto Reconnect Mode
Auto Reconnect controls whether or not the image scanner automatically begins 
the re-link process when a loss of connection...

B - 2
Maximum Link Attempts
The Maximum Link Attempts setting controls the number of times the image 
scanner tries to form a connection with a base unit or PC.  During the 
connection setup process, the image scanner transmits in order to search for 
and connect to a base unit.  In order to prevent continuous transmissions that 
could interfere with other users of the ISM band, the number of attempts to 
connect is limited by this setting.  After the maximum number of attempts is 
reached, the image...

B - 3
Scan the Relink Time-Out bar code, then scan the number of seconds for the 
setting (from 1-100) from the inside back cover.  Scan Save to save the setting.  
Default = 3 seconds.
Bluetooth/ISM Network Activity Examples
Default values:
When the image scanner goes out of range, the image scanner repeatedly 
attempts to connect to base unit.  Each attempt consists of approximately 5 
seconds of active time followed by 3 seconds of idle time.  After one hour, the 
image scanner powers off and batch...

B - 4
Auto Reconnect Mode set to 1
Maximum Link Attempts set to 0 
Relink Time-Out set to 10
Image Scanner Power Time-Out Timer set to 1800:  
Note:See Image Scanner Power Time-Out Timer on page 3-4.
The image scanner attempts to connect to the base unit every 15 seconds, 
measured from start of attempt to start of attempt.  After one half hour, the 
image scanner powers off. 

Sample Symbols
UPC A
0  123456  7890Interleaved 2 of 5
Code 128
EAN 13
1234567890
Code 128
9  780330  290951
654
EAN 8
3210  5
456123
8 0
UPC-E 

 
Sample Symbols
Code 93
123456-9$Straight 2 of 5 Industrial
123456Matrix 2 of 5
6543210GS1 DataBar
(01)00123456789012
Code 39
Codabar
BC321
A13579B