Honeywell 1900gsr 2 User Manual

							Xenon/Granit User Guide 301
*Gain - None SNPGAN1244
Gain - Medium SNPGAN2244
Gain - Heavy SNPGAN4244
Gain - Maximum SNPGAN8244
Target White Value (0-255) *125 SNPWHT###244
Delta for Acceptance (0-255) *25 SNPDEL###244
Update Tries (0-10) *6 SNPTRY##245
Target Set Point Percentage (1-
99) *50SNPPCT##245
Image Ship *Infinity Filter - Off IMGINF0246
Infinity Filter - On IMGINF1246
*Compensation Off IMGCOR0246
Compensation On IMGCOR1246
*Pixel Depth - 8 bits/pixel 
(grayscale)IMGBPP8246
Pixel Depth - 1 bit/pixel (B&W) IMGBPP1246
*Don’t Sharpen Edges IMGEDG0247
Sharpen Edges (0-23) IMGEDG##247
*File Format - JPEG IMGFMT6248
File Format - KIM IMGFMT0248
File Format - TIFF binary IMGFMT1248
File Format - TIFF binary group 4, 
compressedIMGFMT2248
File Format - TIFF grayscale IMGFMT3248
File Format - Uncompressed 
binaryIMGFMT4248
File Format - Uncompressed 
grayscaleIMGFMT5248
File Format - BMP IMGFMT8248
*Histogram Stretch Off IMGHIS0248
Histogram Stretch On IMGHIS1248
*Noise Reduction Off IMGFSP0249
Noise Reduction On IMGFSP1249
Invert Image around X axis IMGNVX1249
Invert Image around Y axis IMGNVY1249
Rotate Image none IMGROT0250
Rotate Image 90° right IMGROT1250
Rotate Image 180° right IMGROT2250
Rotate Image 90° left IMGROT3250
SelectionSetting
* Indicates defaultSerial Command
# Indicates a numeric 
entryPage 
						

							302 Xenon/Granit User Guide
JPEG Image Quality (0-100) *50 IMGJQF###250
*Gamma Correction Off IMGGAM0251
Gamma Correction On (0-1000) IMGGAM###251
Image Crop - Left (0-843) *0 IMGWNL###251
Image Crop - Right (0-843) *843 IMGWNR###251
Image Crop - Top (0-639) *0 IMGWNT###251
Image Crop - Bottom (0-639) 
*639IMGWNB###252
Image Crop - Margin (1-238) *0 IMGMAR###252
Protocol - None (raw) IMGXFR0252
Protocol - None (default USB) IMGXFR2252
Protocol - Hmodem Compressed IMGXFR3252
Protocol - Hmodem IMGXFR4252
Ship Every Pixel IMGSUB1253
Ship Every 2nd Pixel IMGSUB2253
Ship Every 3rd Pixel IMGSUB3253
*Document Image Filter Off IMGUSH0253
Document Image Filter On (0-
255)IMGUSH###253
*Don’t Ship Histogram IMGHST0254
Ship Histogram IMGHST1254
Image Size Compatibility Force VGA Resolution IMGVGA1254
*Native Resolution IMGVGA0255
Intelligent Signature Capture Optimize On DECBND1255
*Optimize Off DECBND0255
Utilities
Add Code I.D. Prefix to All Symbologies (Temporary) PRECA2,BK2995C80!261
Show Decoder Revision REV_DR261
Show Scan Driver Revision REV_SD261
Show Software Revision REVINF262
Show Data Format DFMBK3?262
Test Menu On TSTMNU1262
*Off TSTMNU0262
Application Plug-Ins (Apps) *Decoding Apps On PLGDCE1263
Decoding Apps Off PLGDCE0263
*Formatting Apps On PLGFOE1263
Formatting Apps Off PLGFOE0263
List Apps PLGINF263
SelectionSetting
* Indicates defaultSerial Command
# Indicates a numeric 
entryPage 
						

							Xenon/Granit User Guide 303
Reset the Factory Defaults Remove Custom Defaults DEFOVR265
Activate Defaults  DEFALT265
SelectionSetting
* Indicates defaultSerial Command
# Indicates a numeric 
entryPage 
						

							304 Xenon/Granit User Guide 
						

							CHAPTER
14
Xenon/Granit User Guide 305
PRODUCT SPECIFICATIONS
Xenon 1900/1900h Corded Scanner Product 
Specifications
ParameterSpecification
Mechanical
Height 6.3 inches (160mm)
Length 4.1 inches (104.1mm)
Width 2.8 inches (71.1mm)
Weight 5.2 ounces (147.42g)
Electrical
Voltage Requirements 4 - 5.5 VDC at input connector
Current Draw @5VDC
B&W
ColorScanningStandby
470mA, 2.35W90mA, .45W
490mA, 2.45W90mA, .45W
Power Supply Noise Rejection Maximum 100mV peak to peak, 10 to 100 kHz
Illumination LED:
Peak Wavelength 624nm +
 18nm (red LED)
IEC 62471: “Exempt Risk Group”
442nm, 552nm (white LED)  
IEC 62471: “Exempt Risk Group”
Aiming:
Peak Wavelength LED 624nm +
 18nm  (red LED)
520nm +
 18nm   (green LED)
IEC 62471: “Exempt Risk Group”
Optical Power Laser 
						

							306 Xenon/Granit User Guide
Xenon 1902/1902h/1912 Cordless Scanner Product 
Specifications
Humidity 0 to 95% non-condensing
Mechanical Drop Operational after 50 drops from 6 feet 
(1.83m) to concrete at 23°C
Vibration Withstands 5G peak from 22 to 300 Hz
ESD Tolerance Up to 15kV direct air
Up to 8 kV indirect coupling plane
Image
Image Size 838 x 640 pixels 
Scan Performance
Skew Angle +65°
Pitch Angle +
45°
Motion Tolerance:
   Streaming Presentation Triggerup to 240 inches per second for 13 mil UPC
Symbol Contrast Grade 1.0 (20% or greater)
Parameter (Continued)Specification
ParameterSpecification
Mechanical
Height 6.3 inches (160mm)
Length 4.1 inches (104.1mm)
Width 2.8 inches (71.1mm)
Weight 7.5 ounces (212.62g)
Electrical
Illumination LED:
Peak Wavelength 624nm +
 18nm (red LED)
IEC 62471: “Exempt Risk Group”
442nm, 552nm (white LED)  
IEC 62471: “Exempt Risk Group”
Aiming:
Peak Wavelength Laser 650nm  
IEC 60825-1: “Class 2”
Peak Wavelength LED 624nm +
 18nm  (red LED)
520nm +
 18nm   (green LED)
IEC 62471: “Exempt Risk Group”
Optical Power Laser 
						

							Xenon/Granit User Guide 307*Storage outside of this temperature range could be detrimental to battery life.
   Expected Hours of Operation 14
   Expected Charge Time 4.5 hours
Radio
Frequency 2.4 to 2.5 GHz (ISM Band) Frequency Hopping 
Bluetooth v.2.1
Range 33 ft. (10 m) typical
Data Rate Up to 1 MBps
Environmental
Temperature Ranges:
Operating 32° F to +122° F (0° C to 50° C)
Storage with battery* -4°F to +95°F (-20°C to 35°C) for storage up to 90 
days 
-4°F to +68°F (-20°C to 20°C) for storage up to 365 
days 
Storage without battery -40°F to +158°F (-40°C to 70°C)
Humidity Up to 95% non-condensing
Mechanical Drop Operational after 50 drops from 6 feet 
(1.8 m) to concrete
Vibration Withstands 5G peak from 22 to 300 Hz
ESD Sensitivity Up to 15kV direct air
Up to 8 kV indirect coupling plane
Sealant Rating IP41
Image
Image Size 838 x 640 pixels 
Scan Performance
Skew Angle +65°
Pitch Angle +
45°
Motion Tolerance:
   Streaming Presentation Trigger up to 240 inches per second for 13 mil UPC
Symbol Contrast Grade 1.0 (20% or greater)
Parameter (Continued)Specification 
						

							308 Xenon/Granit User Guide
Xenon 1902g-BF Scanner Product Specifications
ParameterSpecification
Mechanical
Height 6.3 inches (160mm)
Length 4.1 inches (104.1mm)
Width 2.8 inches (71.1mm)
Weight 6.9 ounces (195g)
Electrical
Illumination LED:
Peak Wavelength 624nm +
 18nm (red LED)
IEC 62471: “Exempt Risk Group”
442nm, 552nm (white LED)  
IEC 62471: “Exempt Risk Group”
Aiming:
Peak Wavelength Laser 650nm  
IEC 60825-1: “Class 2”
Peak Wavelength LED 624nm +
 18nm  (red LED)
520nm +
 18nm   (green LED)
IEC 62471: “Exempt Risk Group”
Optical Power Laser 
						

							Xenon/Granit User Guide 309
Granit 1910i Industrial Corded Scanner Product 
Specifications
Motion Tolerance: Up to 240 inches per second for 13 mil UPC
Symbol Contrast Grade 1.0 (20% or greater)
Parameter (Continued)Specification
ParameterSpecification
Mechanical
Height 7.7 in. (195.6mm)
Length 5.2 in. (132.1mm)
Width 2.9 in. (73.7mm)
Weight 10.6 oz. (300g)
Electrical
Voltage Requirements 4 - 5.5 VDC at input connector
Current Draw @5VDC ScanningStandby
470mA, 2.35W100mA, 5W
Power Supply Noise Rejection Maximum 100mV peak to peak, 10 to 100 kHz
Illumination LED:
Peak Wavelength 624nm +
 18nm (red LED)
IEC 62471: “Exempt Risk Group”
Aiming:
Peak Wavelength Laser 650nm
IEC 60825-1: “Class 2”
Optical Power Laser 
						

							310 Xenon/Granit User Guide
Granit 1911i Industrial Cordless Scanner Product 
Specifications
Skew Angle +65°
Pitch Angle +
45°
Motion Tolerance:
   Streaming Presentation Trigger:
    13 mil UPC240 inches per second at 6.5 in. (16.5cm)
150 inches per second at 10 in. (25.4cm)
Symbol Contrast Grade 1.0 (20% or greater)
Parameter (Continued)Specification
ParameterSpecification
Mechanical
Height 7.7 in. (195.6mm)
Length 5.2 in. (132.1mm)
Width 2.9 in. (73.7mm)
Weight 13.8 oz. (390g)
Electrical
Illumination LED:
Peak Wavelength 624nm +
 18nm (red LED)
IEC 62471: “Exempt Risk Group”
Aiming:
Peak Wavelength Laser 650nm
IEC 60825-1: “Class 2”
Optical Power Laser