Honeywell 1900gsr 2 User Manual

							Xenon/Granit User Guide 291
Codabar Start/Stop Char.*Don’t Transmit CBRSSX0187
Transmit CBRSSX1187
Codabar Check Char.*No Check Char. CBRCK20187
Validate, But Don’t Transmit CBRCK21187
Validate, and Transmit CBRCK22187
Codabar Concatenation *Off CBRCCT0188
On CBRCCT1188
Require CBRCCT2188
Codabar Message Length Minimum (2 - 60)  *4 CBRMIN##189
Maximum (2 - 60)  *60 CBRMAX##189
Code 39 Default All Code 39 
SettingsC39DFT189
Off C39ENA0189
*On C39ENA1189
Code 39 Start/Stop Char.*Don’t Transmit C39SSX0189
Transmit C39SSX1189
Code 39 Check Char.*No Check Char. C39CK20190
Validate, But Don’t 
TransmitC39CK21190
Validate, 
and TransmitC39CK22190
Code 39 Message Length Minimum (0 - 48)  *0 C39MIN##190
Maximum (0 - 48)  *48 C39MAX##190
Code 39 Append *Off C39APP0191
On C39APP1191
Code 32 Pharmaceutical (PARAF) *Off C39B320191
On C39B321191
Code 39 Full ASCII *Off C39ASC0191
On C39ASC1191
Code 39 Code Page C39DCP191
Interleaved 2 of 5 Default All Interleaved
2 of 5 SettingsI25DFT193
Off I25ENA0193
*On I25ENA1193
Interleaved 2 of 5 Check Digit*No Check Char. I25CK20193
Validate, But Don’t 
TransmitI25CK21193
Validate, and Transmit I25CK22193
SelectionSetting
* Indicates defaultSerial Command
# Indicates a numeric 
entryPage 
						

							292 Xenon/Granit User Guide
Interleaved 2 of 5 Message Length Minimum (2 - 80)  *4 I25MIN##194
Maximum (2 - 80)  *80 I25MAX##194
NEC 2 of 5 Default All NEC
2 of 5 SettingsN25DFT194
Off N25ENA0194
*On N25ENA1194
NEC 2 of 5 Check Digit*No Check Char. N25CK20194
Validate, But Don’t 
TransmitN25CK21194
Validate, and Transmit N25CK22194
NEC 2 of 5 Message Length Minimum (2 - 80)  *4 N25MIN##195
Maximum (2 - 80)  *80 N25MAX##195
Code 93 Default All Code 93 
SettingsC93DFT195
Off C93ENA0195
*On C93ENA1195
Code 93 Message Length Minimum (0 - 80)  *0 C93MIN##196
Maximum (0 - 80)  *80 C93MAX##196
Code 93 Append On C93APP1196
*Off C93APP0196
Code 93 Code Page Code 93 Code Page C93DCP196
Straight 2 of 5 Industrial Default All Straight 2 of 5 
Industrial SettingsR25DFT197
*Off R25ENA0197
On R25ENA1197
Straight 2 of 5 Industrial Message 
LengthMinimum (1 - 48)  *4 R25MIN##197
Maximum (1 - 48)  *48 R25MAX##197
Straight 2 of 5 IATA Default All Straight 2 of 5 IATA
SettingsA25DFT198
Straight 2 of 5 IATA *Off A25ENA0198
On A25ENA1198
Straight 2 of 5 IATA Redundancy Range (0 - 10) *0 A25VOT##198
Straight 2 of 5 IATA Message 
LengthMinimum (1 - 48)  *4 A25MIN##198
Maximum (1 - 48)  *48 A25MAX##198
Matrix 2 of 5 Default All Matrix 2 of 5
SettingsX25DFT199
*Off X25ENA0199
On X25ENA1199
SelectionSetting
* Indicates defaultSerial Command
# Indicates a numeric 
entryPage 
						

							Xenon/Granit User Guide 293
Matrix 2 of 5 Message Length Minimum (1 - 80)  *4 X25MIN##199
Maximum (1 - 80)  *80 X25MAX##199
Code 11 Default All Code 11 
SettingsC11DFT200
*Off C11ENA0200
On C11ENA1200
Code 11 Check Digits Required 1 Check Digit C11CK20200
*2 Check Digits C11CK21200
Code 11 Message Length Minimum (1 - 80)  *4 C11MIN##200
Maximum (1 - 80)  *80 C11MAX##200
Code 128 Default All Code 128
Settings128DFT201
Off 128ENA0201
*On 128ENA1201
ISBT Concatenation *Off ISBENA0201
On ISBENA1201
Code 128 Redundancy Range (0 - 10) *0 128VOT##201
Code 128 Message Length Minimum (0 - 80)  *0 128MIN##202
Maximum (0 - 80)  *80 128MAX##202
Code 128 Append *On 128APP1202
Off 128APP0202
Code 128 Code Page Code 128 Code Page (*2) 128DCP##202
GS1-128 Default All GS1-128 Settings GS1DFT203
*On GS1ENA1203
Off GS1ENA0203
GS1-128 Message Length Minimum (1 - 80)  *1 GS1MIN##203
Maximum (0 - 80)  *80 GS1MAX##203
Telepen Default All Telepen
SettingsTELDFT204
*Off TELENA0204
On TELENA1204
Telepen Output *AIM Telepen Output TELOLD0204
Original Telepen Output TELOLD1204
Telepen Message Length Minimum (1 - 60)  *1 TELMIN##204
Maximum (1 - 60)  *60 TELMAX##204
UPC-A Default All 
UPC-A SettingsUPADFT205
Off UPBENA0205
*On UPBENA1205
SelectionSetting
* Indicates defaultSerial Command
# Indicates a numeric 
entryPage 
						

							294 Xenon/Granit User Guide
UPC-A Check Digit Off UPACKX0205
*On UPACKX1205
UPC-A Number System Off UPANSX0206
*On UPANSX1206
UPC-A 2 Digit Addenda *Off UPAAD20206
On UPAAD21206
UPC-A 5 Digit Addenda *Off UPAAD50206
On UPAAD51206
UPC-A Addenda Required *Not Required UPAARQ0206
Required UPAARQ1206
Addenda Timeout Range (0 - 120) *500 DLYADD#####207
UPC-A Addenda 
SeparatorOff UPAADS0207
*On UPAADS1207
UPC-A/EAN-13 with Extended 
Coupon Code*Off CPNENA0207
Allow Concatenation CPNENA1207
Require Concatenation CPNENA2207
Addenda Timeout Range (0 - 120) *500 DLYADD#####208
Coupon GS1 DataBar Output GS1 Output Off CPNGS10208
GS1 Output On CPNGS11208
UPC-E0 Default All UPC-E
SettingsUPEDFT209
Off UPEEN00209
*On UPEEN01209
UPC-E0 Expand *Off UPEEXP0209
On UPEEXP1209
UPC-E0 Addenda Required Required UPEARQ1209
*Not Required UPEARQ0209
Addenda Timeout Range (0 - 120) *500 DLYADD#####210
UPC-E0 Addenda Separator *On UPEADS1210
Off UPEADS0210
UPC-E0 Check Digit Off UPECKX0210
*On UPECKX1210
UPC-E0 Leading Zero Off UPENSX0211
*On UPENSX1211
UPC-E0 Addenda 2 Digit Addenda On UPEAD21211
*2 Digit Addenda Off UPEAD20211
5 Digit Addenda On UPEAD51211
*5 Digit Addenda Off UPEAD50211
SelectionSetting
* Indicates defaultSerial Command
# Indicates a numeric 
entryPage 
						

							Xenon/Granit User Guide 295
UPC-E1 *Off UPEEN10211
On UPEEN11211
EAN/JAN-13 Default All EAN/
JAN SettingsE13DFT212
Off E13ENA0212
*On E13ENA1212
Convert UPC-A to EAN-13 UPC-A Converted to EAN-13 UPAENA0212
Do not Convert UPC-A UPAENA1212
EAN/JAN-13 Check Digit Off E13CKX0213
*On E13CKX1213
EAN/JAN-13 2 Digit Addenda 2 Digit Addenda On E13AD21213
*2 Digit Addenda Off E13AD20213
5 Digit Addenda On E13AD51213
*5 Digit Addenda Off E13AD50213
EAN/JAN-13 Addenda Required *Not Required E13ARQ0213
Required E13ARQ1213
Addenda Timeout Range (0 - 120) *500 DLYADD#####214
EAN/JAN-13 Addenda 
SeparatorOff E13ADS0214
*On E13ADS1214
ISBN Translate *Off E13ISB0214
On E13ISB1214
EAN/JAN-8 Default All EAN/
JAN 8 SettingsEA8DFT215
Off EA8ENA0215
*On EA8ENA1215
EAN/JAN-8 Check Digit Off EA8CKX0215
*On EA8CKX1215
EAN/JAN-8 Addenda *2 Digit Addenda Off EA8AD20215
2 Digit Addenda On EA8AD21215
*5 Digit Addenda Off EA8AD50215
5 Digit Addenda On EA8AD51215
EAN/JAN-8 Addenda Required *Not Required EA8ARQ0216
Required EA8ARQ1216
Addenda Timeout Range (0 - 120) *500 DLYADD#####216
EAN/JAN-8 Addenda 
SeparatorOff EA8ADS0216
*On EA8ADS1216
SelectionSetting
* Indicates defaultSerial Command
# Indicates a numeric 
entryPage 
						

							296 Xenon/Granit User Guide
MSI Default All MSI Settings MSIDFT217
*Off MSIENA0217
On MSIENA1217
MSI Check Character *Validate Type 10, but Don’t 
TransmitMSICHK0217
Validate Type 10 and 
TransmitMSICHK1217
Validate 2 Type 10 Chars, but 
Don’t TransmitMSICHK2218
Validate 2 Type 10 Chars and 
TransmitMSICHK3218
Validate Type 11 then Type 10 
Char, but Don’t TransmitMSICHK4218
Validate Type 11 then Type 10 
Char and TransmitMSICHK5218
Disable MSI Check Characters MSICHK6218
MSI Message Length Minimum (4 - 48) *4 MSIMIN##218
Maximum (4 - 48) *48 MSIMAX##218
GS1 DataBar Omnidirectional Default All 
GS1 DataBar Omnidirectional 
SettingsRSSDFT219
Off RSSENA0219
*On RSSENA1219
GS1 DataBar Limited Default All GS1 DataBar Limited 
SettingsRSLDFT219
Off RSLENA0219
*On RSLENA1219
GS1 DataBar Expanded Default All GS1 DataBar 
Expanded SettingsRSEDFT220
Off RSEENA0220
*On RSEENA1220
GS1 DataBar Expanded Msg. 
LengthMinimum (4 - 74) *4 RSEMIN##220
Maximum (4 - 74) *74 RSEMAX##220
Trioptic Code *Off TRIENA0220
On TRIENA1220
Codablock A Default All Codablock A Settings CBADFT221
*Off CBAENA0221
On CBAENA1221
Codablock A Msg. Length Minimum (1 - 600) *1 CBAMIN###221
Maximum (1 - 600) *600 CBAMAX###221
SelectionSetting
* Indicates defaultSerial Command
# Indicates a numeric 
entryPage 
						

							Xenon/Granit User Guide 297
Codablock F Default All Codablock F Settings CBFDFT222
*Off CBFENA0222
On CBFENA1222
Codablock F Msg. Length Minimum (1 - 2048) *1 CBFMIN####222
Maximum (1 - 2048) *2048 CBFMAX####222
Label Code On LBLENA1222
* Off LBLENA0222
PDF417 Default All PDF417 Settings PDFDFT223
*On PDFENA1223
Off PDFENA0223
PDF417 Msg. Length Minimum (1-2750) *1 PDFMIN####223
Maximum (1-2750)  *2750 PDFMAX####223
MacroPDF417 *On PDFMAC1224
Off PDFMAC0224
MicroPDF417 Default All Micro PDF417 Settings MPDDFT224
On MPDENA1224
*Off MPDENA0224
MicroPDF417 Msg. Length Minimum (1-366) *1 MPDMIN###224
Maximum (1-366)  *366 MPDMAX###224
GS1 Composite Codes On COMENA1225
*Off COMENA0225
UPC/EAN Version On COMUPC1225
*Off COMUPC0225
GS1 Composite Codes Msg. LengthMinimum (1-2435)  *1 COMMIN####225
Maximum (1-2435) *2435 COMMAX####225
GS1 Emulation GS1-128 Emulation EANEMU1226
GS1 DataBar Emulation EANEMU2225
GS1 Code Expansion Off EANEMU3226
EAN8 to EAN13 Conversion EANEMU4226
*GS1 Emulation Off EANEMU0226
TCIF Linked Code 39 On T39ENA1227
*Off T39ENA0227
QR Code Default All QR Code Settings QRCDFT227
*On QRCENA1227
Off QRCENA0227
QR Code Msg. Length Minimum (1-7089) *1 QRCMIN####227
Maximum (1-7089) *7089 QRCMAX####227
SelectionSetting
* Indicates defaultSerial Command
# Indicates a numeric 
entryPage 
						

							298 Xenon/Granit User Guide
QR Code Append *On QRCAPP1228
Off QRCAPP0228
QR Code Page QR Code Page (*3) QRCDCP##228
Data Matrix Default All Data Matrix Settings IDMDFT229
*On IDMENA1229
Off IDMENA0229
Data Matrix Msg. Length Minimum (1-3116) *1 IDMMIN####229
Maximum (1-3116) *3116 IDMMAX####229
Data Matrix Code Page Data Matrix Code Page (*51) IDMDCP##229
MaxiCode Default All MaxiCode Settings MAXDFT230
On MAXENA1230
*Off MAXENA0230
MaxiCode Msg. Length Minimum (1-150) *1 MAXMIN###230
Maximum (1-150) *150 MAXMAX###230
Aztec Code Default All Aztec Code Settings AZTDFT231
*On AZTENA1231
Off AZTENA0231
Aztec Code Msg. Length Minimum (1-3832) *1 AZTMIN####231
Maximum (1-3832) *3832 AZTMAX####231
Aztec Append *On AZTAPP1231
Off AZTAPP0231
Aztec Code Page Aztec Code Page (*51) AZTDCP##232
Chinese Sensible (Han Xin) Code Default All Han Xin Code Settings HX_DFT232
On HX_ENA1232
*Off HX_ENA0232
Chinese Sensible (Han Xin) Code 
Msg. LengthMinimum (1-7833) *1 HX_MIN####233
Maximum (1-7833) *7833 HX_MAX####233
Postal Codes - 2D
2D Postal Codes *Off POSTAL0233
SelectionSetting
* Indicates defaultSerial Command
# Indicates a numeric 
entryPage 
						

							Xenon/Granit User Guide 299
Single 2D Postal Codes Australian Post On POSTAL1233
British Post On POSTAL7233
Canadian Post On POSTAL30233
Intelligent Mail Bar Code On POSTAL10233
Japanese Post On POSTAL3234
KIX Post On POSTAL4234
Planet Code On POSTAL5234
Postal-4i On POSTAL9234
Postnet On POSTAL6234
Postnet with B and B’ Fields On POSTAL11234
InfoMail On POSTAL2234
Combination 2D Postal Codes InfoMail and British Post  On POSTAL8234
Intelligent Mail Bar Code and 
Postnet with B and B’ Fields OnPOSTAL20234
Postnet and Postal-4i On POSTAL14235
Postnet and Intelligent Mail Bar 
Code OnPOSTAL16235
Postal-4i and Intelligent Mail Bar 
Code OnPOSTAL17235
Postal-4i and Postnet with B and 
B’ Fields OnPOSTAL19235
Planet and Postnet On POSTAL12235
Planet and Postnet with B and B’ 
Fields OnPOSTAL18235
Planet and Postal-4i On POSTAL13235
Planet and Intelligent Mail Bar 
Code OnPOSTAL15235
Planet, Postnet, and Postal-4i On POSTAL21235
Planet, Postnet, and Intelligent 
Mail Bar Code OnPOSTAL22235
Planet, Postal-4i, and Intelligent 
Mail Bar Code OnPOSTAL23236
Postnet, Postal-4i, and Intelligent 
Mail Bar Code OnPOSTAL24236
Planet, Postal-4i, and Postnet with 
B and B’ Fields OnPOSTAL25236
Planet, Intelligent Mail Bar Code, 
and Postnet with B and B’ Fields 
OnPOSTAL26236
 Postal-4i, Intelligent Mail Bar 
Code, and Postnet with B and B’ 
Fields OnPOSTAL27236
SelectionSetting
* Indicates defaultSerial Command
# Indicates a numeric 
entryPage 
						

							300 Xenon/Granit User Guide
Planet, Postal-4i, Intelligent Mail 
Bar Code, and Postnet  OnPOSTAL28236
Planet, Postal-4i, Intelligent Mail 
Bar Code, and Postnet with B and 
B’ Fields OnPOSTAL29236
Planet Code Check Digit Transmit PLNCKX1236
*Don’t Transmit PLNCKX0237
Postnet Check Digit Transmit NETCKX1237
*Don’t Transmit NETCKX0237
Australian Post Interpretation Bar Output AUSINT0237
Numeric N Table AUSINT1237
Alphanumeric C Table AUSINT2237
Combination N and C Tables AUSINT3238
Postal Codes - Linear
China Post (Hong Kong 2 of 5)  Default All China Post (Hong Kong 
2 of 5) SettingsCPCDFT238
*Off CPCENA0238
On CPCENA1238
China Post (Hong Kong 2 of 5) 
Msg. LengthMinimum (2 - 80) *4 CPCMIN##238
Maximum (2 - 80) *80 CPCMAX##238
Korea Post Default All Korea Post Settings KPCDFT239
*Off KPCENA0239
On KPCENA1239
Korea Post Msg. Length Minimum (2 - 80) *4 KPCMIN##239
Maximum (2 - 80) *48 KPCMAX##239
Korea Post Check Digit Transmit Check Digit KPCCHK1239
*Don’t Transmit Check Digit KPCCHK0239
Imaging Default Commands
Image Snap Default all Imaging Commands IMGDFT241
Imaging Style - Decoding SNPSTY0242
*Imaging Style - Photo SNPSTY1242
Imaging Style - Manual SNPSTY2242
Beeper On SNPBEP1242
*Beeper Off SNPBEP0242
*Wait for Trigger Off SNPTRG0243
Wait for Trigger On SNPTRG1243
*LED State - Off SNPLED0243
LED State - On SNPLED1243
Exposure (1-7874 microseconds) SNPEXP243
SelectionSetting
* Indicates defaultSerial Command
# Indicates a numeric 
entryPage