Honeywell 1300g2 Owners Manual
Here you can view all the pages of manual Honeywell 1300g2 Owners Manual. The Honeywell manuals for Scanner are available online for free. You can easily download all the documents as PDF.
Page 121
6 - 35 EAN/JAN 8 EAN/JAN 8 Check Digit This selection allows you to specify whether the check digit should be transmit- ted at the end of the scanned data or not. Default = On. * On Off Off Off * On
Page 122
6 - 36 EAN/JAN 8 Addenda This selection adds 2 or 5 digits to the end of all scanned EAN/JAN 8 data. Default = Off for both 2 Digit and 5 Digit Addenda. EAN/JAN 8 Addenda Required When Addenda Required is set to on, the scanner will only read EAN/JAN 8 bar codes that have addenda. Default = Not Required. * 5 Digit Addenda 5 Digit Addenda On* 2 Digit Addenda Off 2 Digit Addenda On * 5 Digit Addenda Off * Not Required Required
Page 123
6 - 37 EAN/JAN 8 Addenda Separator When this feature is on, there is a space between the data from the bar code and the data from the addenda. When turned off, there is no space. Default = On. MSI MSI MSI Check Character Different types of check characters are used with MSI bar codes. You can program the scanner to read MSI bar codes with Type 10 check characters. Default = Validate Type 10, but Don’t Transmit. Off * On On * Off
Page 124
6 - 38 When Check Character is set to Validate and Transmit, the scanner will only read MSI bar codes printed with the specified type check character, and will transmit this character at the end of the scanned data. When Check Character is set to Validate, but Don’t Transmit, the unit will only read MSI bar codes printed with the specified type check character, but will not transmit the check character with the scanned data. MSI Message Length Scan the bar codes below to change the message length....
Page 125
6 - 39 Plessey Code Plessey Message Length Scan the bar codes below to change the message length. Refer to Message Lengthon page 6-2 for additional information. Minimum and Maximum lengths = 4-48. Minimum Default = 4, Maximum Default = 48. GS1 DataBar Omnidirectional < Default All GS1 DataBar Omnidirectional Settings > On * Off Minimum Message Length Maximum Message Length
Page 126
6 - 40 GS1 DataBar Omnidirectional GS1 DataBar Limited < Default All GS1 DataBar Limited Settings > GS1 DataBar Limited GS1 DataBar Expanded < Default All GS1 DataBar Expanded Settings > * On Off * On Off
Page 127
6 - 41 GS1 DataBar Expanded GS1 DataBar Expanded Message Length Scan the bar codes below to change the message length. Refer to Message Lengthon page 6-2 for additional information. Minimum and Maximum lengths = 4-74. Minimum Default = 4, Maximum Default = 74. China Post Code * On Off Minimum Message Length Maximum Message Length
Page 128
6 - 42 China Post Code China Post Message Length Scan the bar codes below to change the message length. Refer to Message Lengthon page 6-2 for additional information. Minimum and Maximum lengths = 2-80. Minimum Default = 4, Maximum Default = 80. On * Off Minimum Message Length Maximum Message Length
Page 129
6 - 43 Korea Post Code Korea Post Code Korea Post Message Length Scan the bar codes below to change the message length. Refer to Message Lengthon page 6-2 for additional information. Minimum and Maximum lengths = 2-80. Minimum Default = 4, Maximum Default = 48. On * Off Minimum Message Length Maximum Message Length
Page 130
6 - 44 Codablock F Codablock F Codablock F Message Length Scan the bar codes below to change the message length. Refer to Message Lengthon page 6-2 for additional information. Minimum and Maximum lengths = 1-2048. Minimum Default = 1, Maximum Default = 2048. On * Off Minimum Message Length Maximum Message Length