Hitachi Storage Navigator Modular 2 User Guide

Upgrading Navigator 2A–7
Hitachi Storage Navigator Modular 2 User’s Guide
4. Click Next to start the upgrade. Windows show the status of the 
upgrade. When the upgrade completes, the Update Complete window 
appears. 
Figure A-4:  Update Complete Window
5. Click Finish to complete the installation. You can now access Navigator 
2 using a Web browser.
Upgrading Navigator 2 on Solaris operating systems
To upgrade Navigator 2 on a Navigator 2-supported Solaris 
operating system
1. Insert the Navigator 2...

A–8Upgrading Navigator 2
Hitachi Storage Navigator Modular 2 User’s Guide
3. Create the temporary directory called/temporary that has more than 
600 MB of available disk space on the file system and expand the 
compressed files. In the example below, 
XXXX denotes a version number. 
4. In the console, issue the following command. 
Specify the IP address (or host name) and port number used to access 
Navigator 2. If you use 1099 for the port number, you can omit the -p 
option. Do not specify 127.0.0.1...

Uninstalling Navigator 2B–1
Hitachi Storage Navigator Modular 2 User’s Guide
B
Uninstalling Navigator 2
This appendix describes how to uninstall the Navigator 2 software 
on a host running one of the Navigator 2-supported operating 
systems.
The topics covered in this appendix are:
ˆBefore you start
ˆWindows operating systems
ˆSolaris and Linux operating systems 

B–2Uninstalling Navigator 2
Hitachi Storage Navigator Modular 2 User’s Guide
Before you start
Observe the following guidelines before uninstalling Navigator 2.
• If the host is running applications other than Navigator 2 that use 
Hitachi Storage Command Suite Common Components, back up the 
database for those applications before uninstalling Navigator 2.
• If the message forcible uninstallation is necessary appears when 
uninstalling Navigator 2, restart the computer and uninstall Navigator 2 
again. If...

Uninstalling Navigator 2B–3
Hitachi Storage Navigator Modular 2 User’s Guide
Figure B-2:  Confirm stopping the services Window
5. Click Next. The Confirm before uninstallation window appears (see 
Figure B-3 on page B-4). 

B–4Uninstalling Navigator 2
Hitachi Storage Navigator Modular 2 User’s Guide
Figure B-3:  Confirm before uninstallation Window
6. Click Next. When un-installation is complete, the Uninstall Complete 
window appears (see Figure B-4).
Figure B-4:  Uninstall Complete Window 

Uninstalling Navigator 2B–5
Hitachi Storage Navigator Modular 2 User’s Guide
7. Click Finish.
8. If other applications using Hitachi Storage Command Suite Common 
Components have been installed, restart the services (for more 
information, refer to the manual for each application).
Solaris and Linux operating systems
To uninstall Navigator 2 on a Navigator 2-supported Solaris or Linux 
operating system
1. If the host is running applications other than Navigator 2 that use Hitachi 
Storage Command Suite...

B–6Uninstalling Navigator 2
Hitachi Storage Navigator Modular 2 User’s Guide 

Recording Navigator 2 SettingsC–1
Hitachi Storage Navigator Modular 2 User’s Guide
C
Recording Navigator 2 
Settings
We recommend that you make a copy of the following table and 
record your Navigator 2 configuration settings for future 
reference.
Table C-1:  Recording Configuration Settings 
FieldDescription
Storage System Name
Management console static IP 
address (used to log in to 
Navigator 2)
Email Notifications
Email Notifications? Disabled
? Enabled (record your settings below)
Domain Name
Mail...

C–2Recording Navigator 2 Settings
Hitachi Storage Navigator Modular 2 User’s Guide
 Default Gateway
Controller 1
 Configuration
? Automatic (Use DHCP)
? Manual (record your settings below)
 IP Address
 Subnet Mask
 Default Gateway
Data Port Settings
Controller 0/ Port A
 IP Address
 Subnet Mask
 Default Gateway
 Negotiation
Controller 0/ Port B
 IP Address
 Subnet Mask
 Default Gateway
 Negotiation
Controller 1/ Port A
 IP Address
 Subnet Mask
 Default Gateway
 Negotiation
Controller 1/ Port B
 IP...