Hitachi Storage Navigator Modular 2 User Guide

Advanced Functions10–13
Hitachi Storage Navigator Modular 2 User’s Guide
Changing the IP Address for connecting to Navigator 2
You may need to change the IP address you use to connect to Navigator 2.
To change the IP address for connecting to Navigator 2
1. Stop the Navigator 2 Server service or daemon process (see Starting or 
stopping the Navigator 2 service or daemon process on page 10-15).
2. If other products are using Hitachi Storage Command Suite Common 
Components:
•  Stop those products.
•  Stop...

10–14Advanced Functions
Hitachi Storage Navigator Modular 2 User’s Guide
Changing the Default Port Number for Navigator 2
By default, Navigator 2 uses the port number 23015. You may need to 
change this port number.
To change the default port number for Navigator 2
1. Stop the Navigator 2 Server service or daemon process (see Starting or 
stopping the Navigator 2 service or daemon process on page 10-15).
2. If other products are using Hitachi Storage Command Suite Common 
Components:
•  Stop those...

Advanced Functions10–15
Hitachi Storage Navigator Modular 2 User’s Guide
Starting or stopping the Navigator 2 service or daemon 
process
If you install Navigator 2 in Windows, Hitachi Storage Command Suite 
Common Components and the Navigator 2 Server are registered in the 
operating system as services. If you install Navigator 2 in Solaris and Linux, 
start and stop scripts of the process created below /etc/init.d and the 
Hitachi Storage Command Suite Common Components and Navigator 2 
Server execute...

10–16Advanced Functions
Hitachi Storage Navigator Modular 2 User’s Guide
Stopping the Navigator 2 server service or daemon process
Windows operating systems
There are two ways to stop Navigator 2 Server on a Windows operating 
system:
•A graphical method
• A command prompt method
To use the graphical method
1. In the Windows Start menu, click Settings > Control Panel.
2. In the Control Panel, double-click Administrative Tools.
3. Double-click Services.
4. In the Services (Local) list, right-click the...

Advanced Functions10–17
Hitachi Storage Navigator Modular 2 User’s Guide
Stopping Hitachi Storage Command Suite common components
Windows operating systems
To stop the Hitachi Storage Command Suite Common Components 
service on Windows operating systems
1. In the Windows Start menu, click Programs > Accessories > 
Command Prompt.
2. In the command prompt, move to the directory where the Hitachi 
Storage Command Suite Common Components are installed. 
3. In the directory where the Hitachi Storage Command...

10–18Advanced Functions
Hitachi Storage Navigator Modular 2 User’s Guide
2. Issue the following command line to check that the daemon process 
stopped. 
The underlined part of the command /opt/HiCommand
 is the path to the 
folder where Hitachi Storage Command Base Common Components are 
installed. For Linux, revise this line according to the path where these 
components reside in your installation. 
•  If the only product that uses Hitachi Storage Command Suite 
Common Components is Navigator 2, this...

Advanced Functions10–19
Hitachi Storage Navigator Modular 2 User’s Guide
Starting the Hitachi Storage Command Suite common 
components
Windows operating systems
To start the Hitachi Storage Command Suite Common Components 
service on Windows operating systems
1. In the Windows Start menu, click Programs > Accessories > 
Command Prompt.
2. In the command prompt, move to the directory where the Hitachi 
Storage Command Suite Common Components are installed. 
3. In the directory where the Hitachi Storage...

10–20Advanced Functions
Hitachi Storage Navigator Modular 2 User’s Guide
It can take several minutes to start the daemon process. Check that the 
daemon process is started by executing the following command.
It can take several minutes to start the daemon process. 
2. Issue the following command line to check that the daemon process 
started. 
The underlined part of the command /opt/HiCommand
 is the path to the 
folder where Hitachi Storage Command Base Common Components are 
installed. For Linux,...

Advanced Functions10–21
Hitachi Storage Navigator Modular 2 User’s Guide
Solaris and Linux operating systems
To start the Navigator 2 Server daemon process on Solaris and Linux 
operating systems, issue the following command line. Root authority is 
required to execute the command. Any directory can be the current 
directory when issuing the command. 
Using the SATA Write and Compare feature
Navigator 2 supports a SATA write and compare feature that ensures the 
integrity of data written to SATA drives....

10–22Advanced Functions
Hitachi Storage Navigator Modular 2 User’s Guide
2. When the Arrays window appears, click the storage system whose SATA 
write and compare setting you want to view or change.
3. In the Arrays pane, click Settings > SATA Write & Compare. The 
SATA Write & Compare window appears, with the current SATA write and 
compare setting displayed.
4. To change the SATA write & compare setting:
a. Click the Change SATA Write & Compare button in the top-right 
area of the SATA Write & Compare...