Hitachi Projector CP-WU9100 User Manual

1
•  Mac® is a registered trademark of Apple Inc.
•  Windows®, DirectDraw® and Direct3D® are registered trademarks of Microsoft Corporation 
in the U.S. and/or other countries.
•  VESA and DDC are trademarks of the Video Electronics Standard Association.
•  HDMITM, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered 
trademarks of HDMI Licensing LLC in the United States and other countries.
•  
Trademark PJLink is a trademark applied for trademark rights in 
Japan, the...

2
Contents
Introduction  . . . . . . . . . . . . . . .3
Features ......................3
Checking the contents of package ....3
Part names ....................4Projector, Control panel and Indicators, Ports, Remote control
Setting up  . . . . . . . . . . . . . . . . .8
Installing the lens unit ............8
Arrangement ...................8
Connecting with your devices .....11Fastening the cables
Fastening the adapter cover ......19
Using the security bar and slot ....20
Connecting to a power supply...

3
Introduction
• Keep the original packing materials, for future shipment. Use the 
original packing materials when moving the projector. Use special caution for 
the lens.
• The projector may make a rattling sound when tilted, moved or shaken, since 
a flap to control the air flow inside of the projector has moved. Be aware that 
this is not a failure or malfunction.
NOTE
Introduction
The projector provides you with the broad use by the following features.
Checking the contents of  package
Refer to the...

4
Introduction
Projector
(1) Dust protector
(2) Remote sensors(23)
(3) Elevator feet (x2) (33)
(4) AC (AC inlet) (21)
(5) Holes for Cable Tie(18)
(6) Security slot (20)
(7) Security bar (20)
(8) Control panel  (5)
(9) Status Monitor(24)
(10) Ports (6)
(11)  Indicators (5)
(12) Intake vents (105)
(13) Exhaust vents(105)
(14) LAMP - 1 lamp cover (102)
(15) LAMP - 2 lamp cover (102)
(16)   Battery cover 
The internal clock battery is 
inside (107).
(1)
(3)(2)
(4)
(5)(6)
(7)
(8)...

5
Control panel and Indicators 
(1) STANDBY/ON button (30)
(2) INPUT button (31)
(3) MENU button (51) 
(4) LENS SHIFT button (34)
(5) ZOOM button (34)
(6) FOCUS - / + buttons (34)
(7) SHUTTER button (46)
(8) FUNCTION button (34, 35)
(9) FILTER indicator (113, 115)
(10) SHUTTER indicator (11 4)
(11) SECURITY indicator (11 4)
(12) LAMP-2 indicator (11 2)
(13) LAMP-1 indicator (11 2) 
(14) TEMP indicator (110 to 114)
(15) POWER indicator (109 , 110)
(16) LAMP-2 indicator (11 2)
(17) LAMP-1...

6
Ports
Introduction
(1) MONITOR OUT port
(2) COMPUTER IN port
(3) HDMI 2 port
(4) HDMI 1 port
(5) DVI-D port
(6) HDBaseT™ port
(7) WIRELESS port
(8) LAN
(9) SDI/DIGITAL 1 port
(10) CONTROL port 
(11) REMOTE CONTROL IN port 
(12) REMOTE CONTROL OUT port 
(13) VIDEO port
(2)
(1)
(3)(4)(5)(6)(7)
(8)
(9)
(10)(11)(12)(13) 

7
• Any button 
marked with * is not 
supported on this 
projector (31).
• Each time you 
press any button 
(except ID buttons), 
the ID button of 
current selected ID 
number will light 
(22).
NOTE
Remote control 
(1) STANDBY button (30)
(2) ON button (30)
(3) ID - 1 / 2 / 3 / 4 buttons (22)
(4) COMPUTER 1 button (31)
(5) COMPUTER 2 button *
(6) VIDEO button (31)
(7) LAN button (31) 
(8) USB TYPE A button *
(9) USB TYPE B button *
(10) HDBaseT button (31)
(11) DIGITAL 1 button (31)
(12)...

8
Setting up
Setting up
Install the projector according to the environment and manner the projector will be 
used in.
For the case of installation in a special state such as ceiling mount, the specified 
mounting accessories (Specifications in the User’s Manual (concise)) and 
service may be required. Before installing the projector, consult your dealer about 
your installation. 
Arrangement
Refer to tables T-1 to T- 2 at the back of User's Manual (concise) as well as the 
following to determine the...

9
Setting up
WARNING►Install the projector where you can access the power 
outlet easily. If an abnormality should occur, unplug the projector urgently. 
Otherwise it could cause a fire or electric shock.
►Do not subject the projector to unstable conditions. If the projector falls 
or topples over, it could result in injury or damage to the projector and the 
surrounding things. Using a damaged projector could result in a fire and an 
electric shock.
•  Do not place the projector in unstable places, such...

10
Setting up
►Place the projector in a cool place with sufficient 
ventilation. The projector may shutdown automatically or may malfunction if its 
internal temperature is too high.
Using a damaged projector could result in a fire and an electric shock.
•  Do not place the projector in direct sunlight or near hot objects such as heaters. 
• Do not place the projector where the air from an air conditioner or similar unit
will directly blow on it.
•  Keep a space of 50 cm or more between the projector and...