Hitachi Projector CP-WU8461 User Manual

41
Operating
Using ▲/▼ buttons on the remote control changes the size of main area in 
PbyP mode.   Changing the size of main area in PbyP mode
1. Select PinP POSITION in SCREEN menu (
68). 
2. Using ▲/▼ buttons on the remote control changes the position of sub area   
    in PinP mode.   Changing the position of sub area in PinP mode
main area
sub areamain area
sub area
PbyP (Picture by Picture) / PinP (Picture in Picture) (continued)
• For some signals, it may not be displayed correctly in the PbyP...

42
Operating
1.To start the MENU, press the MENU button. The MENU you last used (EASY 
or ADVANCED) will appear. EASY MENU has priority to appear just after 
powered on.
Using the menu function
2.
(1)  Use the ▲/▼ cursor buttons to select an item to 
operate. If you want to change it to the ADVANCED 
MENU, select the ADVANCED MENU.
(2)  Use the ◄/► cursor buttons to operate the item. This projector has the following menus: 
PICTURE, IMAGE, INPUT, SETUP, AUDIO, SCREEN, OPTION, NETWORK, 
SECURITY and EASY...

43
Operating
Using the menu function (continued)
3.To close the MENU, press the MENU button again or select EXIT and press 
the ◄ cursor button or ENTER button. Even if you do not do anything, the 
dialog will automatically disappear after about 30 seconds.
Indication in OSD (On Screen Display)
The meanings of the general words on the OSD are as follows.
Indication Meaning
EXITSelecting this word finishes the OSD menu. Its the same as 
pressing the MENU button.
RETURN Selecting this word returns the menu...

44
Operating
Using the menu function (continued)
Containing items of  each menu
The items contained in the menus are as below;
Menu Items
EASY MENU (
45)ASPECT, AUTO  KEYSTONE, 
 KEYSTONE,  KEYSTONE, 
PERFECT FIT, PICTURE MODE, ECO MODE, INSTALLATION, 
RESET, FILTER TIME, LANGUAGE, ADVANCED MENU, EXIT
PICTURE (
47)BRIGHTNESS, CONTRAST, GAMMA, COLOR TEMP, COLOR, 
TINT, SHARPNESS, HDCR, ACCENTUALIZER, ACTIVE IRIS, 
MY MEMORY
IMAGE (
50)ASPECT, OVER SCAN, V POSITION, H POSITION, H PHASE,  
H  SIZE, AUTO...

45
EASY MENU
EASY MENU
From the EASY MENU, items shown in the table 
below can be performed.
Select an item using the ▲/▼ cursor buttons. Then 
perform it according to the following table.
Item Description
ASPECTUsing the ◄/► buttons switches the mode for aspect ratio.
See the ASPECT item in IMAGE menu (
50).
AUTO KEYSTONE Using the ► button executes the auto keystone function.See the AUTO KEYSTONE item in SETUP menu (57).
 KEYSTONEUsing the ◄/► buttons corrects the vertical keystone distortion.
See...

46
EASY MENU
Item Description
PICTURE MODE 
(continued)
GAMMA COLOR TEMP
NORMAL 1 DEFAULT 1 HIGH
CINEMA 2 DEFAULT 3 LOW
DYNAMIC 3 DEFAULT 1 HIGH
BOARD(BLACK) 4 DEFAULT 4 Hi-BRIGHT-1
BOARD(GREEN) 4 DEFAULT 5 Hi-BRIGHT-2
WHITEBOARD 5 DEFAULT 2 MID
DAYTIME 6 DEFAULT 6 Hi-BRIGHT-3
DICOM SIM. 7 DEFAULT 2 MID
• When the combination of GAMMA and COLOR TEMP differs 
from pre-assigned modes above, the display on the menu for the 
PICTURE MODE is “CUSTOM”. Please refer to the GAMMA and 
COLOR TEMP (
47, 48) items...

47
PICTURE menu
PICTURE menu
From the PICTURE menu, items shown in the table 
below can be performed. 
Select an item using the ▲/▼ cursor buttons, and 
press the ► cursor button or ENTER button to 
execute the item. Then perform it according to the 
following table.
Item Description
BRIGHTNESSUsing the 
◄/► buttons adjusts the brightness.
Dark 
 Light
CONTRASTUsing the 
◄/► buttons adjusts the contrast.
Weak 
 Strong
GAMMAUsing the ▲/▼ buttons switches the gamma mode.
To adjust CUSTOM
Selecting a mode...

48
PICTURE menu
Item Description
COLOR TEMPUsing the ▲/▼ buttons switches the color temperature mode.
To adjust CUSTOM
Selecting a mode whose name includes 
CUSTOM and then pressing the ► button 
or the ENTER button displays a dialog 
to aid you in adjusting the OFFSET and 
GAIN of the selected mode.
OFFSET adjustments change the color intensity on the whole tones 
of the test pattern. GAIN adjustments mainly affect color intensity on 
the brighter tones of the test pattern.
Choose an item using the ◄/►...

49
PICTURE menu
Item Description
SHARPNESSUsing the ◄/► buttons adjusts the sharpness.
Weak 
 Strong
• There may be some noise and/or the screen may flicker for a 
moment when an adjustment is made. This is not a malfunction.
HDCR
A function to show a clear picture in a bright room. 
Using the
◄/► buttons adjusts the contrast.
ACCENTUALIZERACCENTUALIZER is a function to improve the legibility.
Using the ◄/► buttons adjusts the sharpness.
Weak 
 Strong
• There may be some noise and/or the screen may...

50
IMAGE menu
IMAGE menu
From the IMAGE menu, items shown in the table 
below can be performed.
Select an item using the ▲/▼ cursor buttons, and 
press the ► cursor button or ENTER button to 
execute the item. Then perform it according to the 
following table. for selected port   
Item Description
ASPECTUsing the ▲/▼ buttons switches the mode for aspect ratio. 
For a computer signal
 NORMAL 
 4:3 
 16:9 
 16:10 
 NATIVE 
       
For HDMI
TM and HDBaseTTM signals
 NORMAL 
 4:3 
 16:9 
 16:10 
...