Hitachi Projector CP-WU8461 User Manual

71
OPTION menu
Item Description
USB TYPE B
Using the ▲/▼ buttons selects the function of USB TYPE B port.  
To use this function, you need to connect the USB TYPE B port of 
the projector and the type A USB port of a computer.
MOUSE 
 USB DISPLAY
MOUSE:  The accessory remote control works as the simple mouse  
and keyboard of the computer.
USB DISPLAY:  The port works as an input port that receives image  
signals from the computer (
109).
• It may take several seconds to project the images from the...

72
OPTION menu
Item Description
MY BUTTON
This item is to assign one of the following functions to MY BUTTON 
(1 to 4) on the remote control (
6).
(1)  Use the ▲/▼ buttons on the MY BUTTON menu to select a 
button from MY BUTTON - 1 to 4 and press the ► or ENTER 
button to display the MY BUTTON setup dialog. 
(2)  Then using the ▲/▼/◄/► buttons sets one of the following 
functions to the chosen button. Press the ENTER or INPUT 
button to save the setting.
SLIDESHOW: Selects the input from USB TYPE A,...

73
OPTION menu
Item Description
MY BUTTON
(continued)
ACCENTUALIZER: Turns on/off the ACCENTUALIZER dialog (49).
HDCR: Turns on/off the HDCR dialog (
49).
STATUS MONITOR: Turns on/off the back light of status monitor 
(
23). This function is unavailable when SAVING is selected in 
STANDBY MODE while the projector is in the standby mode.
SERVICESelecting this item displays the SERVICE 
menu.
Select an item using the ▲/▼ buttons, 
and press the ► button or the ENTER 
button on the remote control to...

74
OPTION menu
Item Description
SERVICE
(continued)FILTER MESSAGE
Use the ▲/▼ button to set the timer for notifying by the message 
when to replace the filter unit 
1000h 
 2000h 
 5000h 
 10000h 
 15000h 
 20000h 
 OFF
After choosing an item except OFF, the message “REMINDER *** 
HRS PASSED ....” will appear after the timer reaches the interval 
time set by this feature (
120). 
When the OFF is chosen, the message will not appear. Utilize this 
feature to keep the air filter clean, setting the...

75
OPTION menu
Item Description
SERVICE
(continued)KEY LOCK
(1)  Use the ▲/▼ buttons to choose the operations control.
CONTROL PANEL 
 REMOTE CONTROL
(2)  Use the ◄/► buttons to select ON or 
OFF.
ON 
 OFF
Selecting ON in Step 2 locks the buttons except STANDBY, ON 
and STANDBY/ON on the operations control selected in Step 1. 
Selecting OFF releases the locked buttons on the operations control 
selected in Step 1.
• Please use this function to prevent tampering or accidental 
operation. 
• Its not...

76
OPTION menu
Item Description
SERVICE
(continued)
COMMUNICATION
Selecting this item displays COMMUNICATION 
menu. 
In this menu, you can configure the serial 
communication settings of the projector using the 
CONTROL port.
• Select an item using the cursor buttons ▲/▼. 
Then pressing the ► button opens the submenu 
for the setting item you selected. Or, pressing 
the ◄ button instead of the ► button makes the 
menu back to the previous one without changing 
the setup. Each submenu can be operated as...

77
OPTION menu
Item Description
SERVICE
(continued)
COMMUNICATION
COMMUNICATION TYPE
Select the communication type for transmission via 
the CONTROL port.
NETWORK BRIDGE (WIRELESS) 
 
 
NETWORK BRIDGE (WIRED) 
 
 
 OFF
NETWORK BRIDGE: Select this type, if it is 
required to control an external device as a 
network terminal, via this projector from the 
computer. Select WIRELESS or WIRED as your 
network connection mode.
The CONTROL port does not accept RS-232C  
commands (
6. Network Bridge Function...

78
OPTION menu
Item Description
SERVICE
(continued)
COMMUNICATION
(continued)
SERIAL SETTINGS
Select the serial communication condition for the 
CONTROL port.
BAUD RATE
4800bps 
 9600bps 
 19200bps 
 38400bps
      
 PARITY
NONE 
 ODD 
 EVEN
    
• The BAUD RATE is fixed to 19200bps and PARITY 
is fixed NONE when the COMMUNICATION TYPE 
is set to OFF
 (76, 77).
TRANSMISSION METHOD
Select the transmission method for communication by 
the NETWORK BRIDGE from the CONTROL port.
HALF-DUPLEX 
...

79
OPTION menu
Item Description
SERVICE
(continued)
COMMUNICATION
(continued)
RESPONSE LIMIT TIME
Select the time period to wait for receiving 
response data from other device communicating by 
the NETWORK BRIDGE and the HALF-DUPLEX 
through the CONTROL port.
OFF 
 1s 
 2s 
 3s
    
OFF: Select this mode if it is not required to check 
the responses from the device that the projector 
sends data to. In this mode, the projector can 
send out data from the computer continuously.
1s /2s /3s: Select the...

80
OPTION menu
Item Description
SERVICE
(continued)INFORMATION
Selecting this item displays a dialog titled “INPUT_INFORMATION”. 
It shows the information about the current input.
• The “FRAME LOCK” message on the dialog means the frame lock 
function is working. 
• The “SCART RGB” message means the COMPONENT ports 
are working as a SCART RGB input port. Please refer to the 
COMPONENT item in INPUT menu (
53).
• This item cant be selected for no signal and sync out.
• When the MY TEXT DISPLAY is set to...