Hitachi Projector CP-WU8451 User Manual

61
SCREEN menu
SCREEN menu
From the SCREEN menu, items shown in the table 
below can be performed.
Select an item using the ▲/▼ cursor buttons, and 
press the ► cursor button or ENTER button to 
execute the item. Then perform it according to the 
following table.
Item Description
LANGUAGEUsing the ▲/▼/◄/► buttons switches the OSD (On Screen 
Display) language.
ENGLISH 
 FRANÇAIS 
 DEUTSCH 
  ESPAÑOL
       
  
(shown in the LANGUAGE dialog)  
Press the ENTER or INPUT button to save the language...

62
SCREEN menu
Item Description
AUTO BLANKUsing the ▲/▼ buttons switches the mode for the AUTO BLANK 
screen.
BLUE 
 WHITE 
 BLACK
       
• To avoid remaining as an afterimage, displayed image will change
to the designated blank color screen by AUTO BLANK after several
minutes at the following conditions.
- When MyScreen or ORIGINAL is displayed as BLANK screen.
- When start-up screen is displayed.
START UP
Using the ▲/▼ buttons switches the mode for the start-up screen.
The start-up screen is a...

63
SCREEN menu
Item Description
MyScreenThis item allows you to capture an image for use as a MyScreen 
image which can be used as the BLANK screen and START UP 
screen. Display the image you want to capture before executing the 
following procedure.
(1)  Selecting this item displays a dialog 
titled “MyScreen”. It will ask you if 
you start capturing an image from 
the current screen.
Please wait for the target image to be displayed, and press 
the ENTER or INPUT button when the image is displayed. The...

64
SCREEN menu
Item Description
MyScreen LockUsing the ▲/▼ buttons turns on/off the MyScreen lock function.
ON 
 OFF
When the ON is selected, the item MyScreen is locked. Use this 
function for protecting the current MyScreen.
• This function cannot be selected when the ON is selected to the 
MyScreen PASSWORD item in SECURITY menu (
93).
MESSAGEUsing the ▲/▼ buttons turns on/off the message function.
ON 
 OFF
When the ON is selected, the following message function works.
“AUTO IN PROGRESS” while...

65
SCREEN menu
Item Description
SOURCE NAMEEach input port for this projector can have a name applied to it.
(1)  Use the ▲/▼ buttons on the SCREEN menu to select SOURCE 
NAME and press the ► or ENTER button.  
The SOURCE NAME menu will be displayed.
(2)  Use the ▲/▼ buttons on the SOURCE 
NAME menu to select the port to be 
named and press the ► button. The 
SOURCE NAME dialog will be displayed. 
Right side of the menu is blank until a 
name is specified.
(3)  Select an icon you would like to assign to...

66
SCREEN menu
Item Description
SOURCE NAME
(continued)
(6)  The current name will be displayed on 
the first line. Use the ▲/▼/◄/► buttons 
and the ENTER or INPUT button to 
select and enter characters. To erase 1 
character at one time, press the RESET 
button or press the ◄ and INPUT button 
at the same time. Also if you move the 
cursor to DELETE or ALL CLEAR on 
screen and press the ENTER or INPUT 
button, 1 character or all characters will 
be erased. The name can be a maximum 
of 16 characters.
(7)...

67
SCREEN menu
Item Description
C.C.
(Closed Caption)The C.C. is the function that displays a 
transcript or dialog of the audio portion of 
a video, files or other presentation or other 
relevant sounds. It is required to have NTSC 
format video or 480i@60 format component 
video source supporting C.C. feature to 
utilize this function.
It may not work properly, depending on equipment or signal source. 
In this case, please turn off the Closed Caption.
DISPLAY
Select Closed Caption DISPLAY setting from...

68
SCREEN menu
Item Description
PinP POSITION
Using ▲/▼ buttons on the remote control changes the position of 
sub area in PinP mode
 (41). 

69
OPTION menu
OPTION menu
From the OPTION menu, items shown in the table 
below can be performed. 
Select an item using the ▲/▼ cursor buttons, and 
press the ► cursor button or ENTER button to execute 
the item, except for the items LAMP TIME and FILTER 
TIME. Then perform it according to the following table.
Item Description
SOURCE SKIPThe ports can be set to be ignored in searching by the AUTO 
SEARCH function (
below) or in selecting by buttons on the control 
panel. 
(1)  Choose a picture input...

70
OPTION menu
Item Description
DIRECT POWER 
ONUsing the ▲/▼ buttons turns on/off the DIRECT POWER ON 
function.
ON 
 OFF
When set to the ON, the lamp in projector will be automatically turned 
on without the usual procedure (
25), only when the projector is 
supplied with the power after the power was cut while the lamp was on.
• This function does not work as long as the power has been 
supplied to the projector while the lamp is off.
• After turning the lamp on by the DIRECT POWER ON function, 
if...