Hitachi Projector CP-WU8451 User Manual

81
NETWORK menu
Remember that incorrect network settings on this 
projector may cause trouble on the network. Be sure 
to consult with your network administrator before 
connecting to an existing access point on your network.
Select “NETWORK” from the main menu to access the 
following functions. 
Select an item using the ▲/▼ cursor buttons on the 
projector or remote control, and press the ► cursor button on the projector or 
remote control, or ENTER button on the remote control to execute the item....

82
NETWORK menu
Item Description
WIRELESS 
SETUP
(continued)DHCP  
(Dynamic Host 
Configuration 
Protocol)Use the ▲/▼ buttons to turn DHCP on/off.
ON 
 OFF
Select OFF when the network does not have DHCP 
enabled. To save the setting, press the ► button.
• When the “DHCP” setting changes to “ON”, it 
takes a little time to obtain IP address from DHCP 
server.
• Auto IP function will be assigned an IP address if 
the projector could not obtain an IP address from 
server even if DHCP is “ON”
IP ADDRESSUse...

83
NETWORK menu
Item Description
WIRELESS 
SETUP
(continued)DATE AND 
TIMEUse the ▲/▼/◄/► buttons to enter the Year (last 
two digits), Month, Date, Hour and Minute.
• When this item is set, the same item in the 
WIRED SETUP menu is overwritten with the same 
setting (
87). 
• The projector will override this setting and retrieve 
DATE AND TIME information from the Time server 
when SNTP is enabled. (
3.1.8 Date/Time 
Settings in the Network Guide)
• This setting will be reset if the projector is...

84
NETWORK menu
Item Description
WIRELESS 
SETUP
(continued)SSIDUse the ▲/▼ 
buttons to select the 
SSID to display the 
SSID menu.
#1 DEFAULT 
 #2 DEFAULT 
 #3 DEFAULT
      
 #5 CUSTOM 
 #4 DEFAULT 
Select one of the DEFAULT (#1~#4) and press ► 
or ENTER button.
To adjust CUSTOM
Press the ► or ENTER button when the # 5 
CUSTOM is selected. The SSID #5 CUSTOM 
menu will be appeared.
(1)  
The current SSID will be displayed on the 
first line. If not yet written, the line will be blank. 
Use the...

85
NETWORK menu
Item Description
WIRELESS 
INFORMATIONSelecting this item displays the WIRELESS INFORMATION dialog 
for viewing the wireless LAN settings. Use the ▲/▼ buttons to 
switch the page.
The first page shows the wireless LAN settings. The second and 
subsequent pages display the signal information of wireless LAN 
connection devices.
• For details of PASSCODE, refer to the manual for “LiveViewer”. 
• Nothing (blank) is shown in the PROJECTOR NAME (88) and 
SSID (
84) field until you setup those...

86
NETWORK menu
Item Description
WIRED SETUPSelecting this item displays the WIRED 
SETUP menu for the wired LAN.
Use the ▲/▼ buttons to select an item, 
and the ► or ENTER button on the remote 
control to perform the item.
DHCP  
(Dynamic Host 
Configuration 
Protocol)Use the ▲/▼ buttons to turn DHCP on/off.
ON 
 OFF
Select OFF when the network does not have 
DHCP enabled. To save the setting, press the ► 
button.
• When the “DHCP” setting changes to “ON”, it 
takes a little time to obtain IP address...

87
NETWORK menu
Item Description
WIRED SETUP
(continued)TIME 
DIFFERENCEUse the ▲/▼ buttons to enter the TIME 
DIFFERENCE. 
Set the same TIME DIFFERENCE as the one 
set on your computer. If unsure, consult your IT 
manager. 
Use the ► button to return to the menu after 
setting the TIME DIFFERENCE.
• When this item is set, the same item in the 
WIRELESS SETUP menu is overwritten with the 
same setting (
82). 
DATE AND 
TIMEUse the ▲/▼/◄/► buttons to enter the Year (last 
two digits), Month, Date, Hour...

88
NETWORK menu
Item Description
PROJECTOR 
NAME(1)  Use the ▲/▼ buttons on the 
NETWORK menu to select the 
PROJECTOR NAME and press 
the ► button. The PROJECTOR 
NAME dialog will be displayed.
(2)  The current PROJECTOR NAME will be displayed on the first 3 
lines. Particular projector name is pre-assigned by default.
Use the ▲/▼/◄/► buttons and the ENTER or INPUT button to 
select and enter characters.
To erase 1 character at one time, press the RESET button or 
press the ◄ and INPUT button at the same...

89
NETWORK menu
Item Description
MY IMAGESelecting this item displays the MY 
IMAGE menu. 
Use the application to transfer the 
image data. It can be downloaded 
from the Hitachi web site.
(http://www.hitachi-america.us/projectors or http://www.
hitachidigitalmedia.com).
Use the ▲/▼ buttons to select an item which is a still image by the 
MY IMAGE (
4. My Image Function in the Network Guide) and the 
► or ENTER button to display the image.
• The item without image stored cannot be selected.
• The image...

90
NETWORK menu
Item Description
PRESENTATIONSelecting this item displays the PRESENTATION menu.
Use ▲/▼ buttons to select one of the following items, then press ► 
or ENTER button to use the function.
• To use Network Presentation, an exclusive application, “LiveViewer” 
is required. It can be installed from the bundled application CD. You 
can also download the latest version and relevant information from 
the Hitachi website (http://www.hitachi-america.us/projectors or http://...