Hitachi Projector CP-D27WN User Manual

21
VIDEODOC.CAMERA
KEYSTONE
ASPECTSEARCHBLANK
MUTE
MY BUTTON
POSITION ESC MENU
RESET
COMPUTER MY SOURCE/
AUTOMAGNIFYPAGE
DOWN
ON
OFF
FREEZEUP
ー
＋VOLUME
1 2
ENTER
Operating
Operating
1.
Adjusting the volume
Use the VOLUME +/VOLUME - buttons to adjust the volume.
A dialog will appear on the screen to aid you in adjusting the 
volume. If you do not do anything, the dialog will automatically 
disappear after about ten seconds.
●  When 
 is selected for current picture input port, the volume adjustment is...

22
VIDEODOC.CAMERA
KEYSTONE
ASPECTSEARCHBLANK
MUTE
MY BUTTON
POSITION ESC MENU
RESET
COMPUTER MY SOURCE/
AUTOMAGNIFYPAGE
DOWN
ON
OFF
FREEZEUP
ー
＋VOLUME
1 2
ENTER
Operating
1.Press VIDEO button on the remote control. 
Each time you press the button, the projector switches its 
input port from the current port as below.
Selecting an input signal (continued)
●  While ON is selected for AUTO SEARCH item in OPTION 
menu, the projector will keep checking every port sequentially 
till an input signal is...

23
1.Press ASPECT button on the remote control.  
Each time you press the button, the projector switches the 
mode for aspect ratio in turn. 
Selecting an aspect ratio
● ASPECT button does not work when no proper signal is inputted.
● NORMAL mode keeps the original aspect ratio setting.
●  The on-screen menu might be displayed outside of the image display area 
depending on the adjustment value of the ASPECT, D-ZOOM and 
 KEYSTONE. Changing the values of ASPECT, D-ZOOM and   
 KEYSTONE may fi x the...

24
Operating
Adjusting the focus
Adjusting the projector's elevator
The  projector  has  Front  foot  for  inclinations  and  Rear  foot  for  horizontals. A  spacer 
is  installed  on  the  Rear  elevator  foot  at  the  time  of  shipment,  and  the  projector 
is  ready  for  use.  If  necessary,  detach  the  spacer,  and  the  elevator  feet  can  be 
manually twisted to make more precise adjustments.
Front footRear foot
0~2°
-1~1°
Front foot
Rear footSpacer    Spacer
Use the focus ring to focus...

25
Operating
1.Press AUTO button on the remote control. 
Pressing this button performs the following.
Using the automatic adjustment feature
  For a computer signal
The vertical position, the horizontal position and the horizontal 
phase will be automatically adjusted. 
Make sure that the application window is set to its maximum size 
prior to attempting to use this feature. A dark picture may still be 
incorrectly adjusted. Use a bright picture when adjusting.
   For a video signal and s-video signal...

26
Operating
1.
Correcting the keystone distortions
2.
KEYSTONE button
VIDEODOC.CAMERA
KEYSTONE
ASPECTSEARCHBLANK
MUTE
MY BUTTON
POSITION ESC MENU
RESET
COMPUTER MY SOURCE/
AUTOMAGNIFYPAGE
DOWN
ON
OFF
FREEZEUP
ー
＋VOLUME
1 2
ENTER
Press the KEYSTONE button on the remote control. 
A dialog will appear on the screen to aid you in correcting the 
distortion.
Use the ◄/► cursor buttons for adjustment.
To close the dialog and complete this operation, press the 
KEYSTONE button again. Even if you do not do...

27
VIDEODOC.CAMERA
KEYSTONE
ASPECTSEARCHBLANK
MUTE
MY BUTTON
POSITION ESC MENU
RESET
COMPUTER MY SOURCE/
AUTOMAGNIFYPAGE
DOWN
ON
OFF
FREEZEUP
ー
＋VOLUME
1 2
ENTER
Operating
1.
Using the magnify feature
2.
3.
4.
Press the MAGNIFY ON button on the remote control. 
The picture will be magnifi ed, and the MAGNIFY dialog will 
appear on the screen. When the 
MAGNIFY ON button is 
pressed for the fi rst time after the projector is turned on, the 
picture will be zoomed by 1.5 times. On the dialog, triangle...

28
Operating
1.Press BLANK button on the remote control. 
The BLANK screen will be displayed instead of the screen of 
input signal. Please refer to BLANK item in SCREEN menu 
(
50).
To exit from the BLANK screen and return to the input signal 
screen, press BLANK button again. 
Temporarily blanking the screen
●  The projector automatically exits from the BLANK mode when 
some control buttons are pressed.
• The sound is not connected with the BLANK screen function. If 
necessary, set the volume or mute...

29
VIDEODOC.CAMERA
KEYSTONE
ASPECTSEARCHBLANK
MUTE
MY BUTTON
POSITION ESC MENU
RESET
COMPUTER MY SOURCE/
AUTO
MAGNIFYPAGE
DOWN
ON
OFF
FREEZEUP
ー
＋VOLUME
1
2
ENTER
FOCUS-
+D-ZOOM-
+
Operating
1.To start the MENU, press the MENU button. The MENU you last used (EASY 
or ADVANCED) will appear. EASY MENU has priority to appear just after 
powered on.
Using the menu function
2.(1)  Use the ▲/▼ cursor buttons to select an item to 
operate. If you want to change it to the ADVANCED 
MENU, select the ADVANCED...

30
Operating
Using the menu function (continued)
3.To close the MENU, press the MENU button again or select EXIT and press 
the ◄ cursor button or ENTER button. Even if you do not do anything, the 
dialog will automatically disappear after about 30 seconds.
●  If you want to move the menu position, use the cursor buttons after pressing the 
POSITION button.
●   Some functions cannot be performed when a certain input port is selected, or 
when a certain input signal is displayed.
●   When you want to...