Hitachi Projector CP-D27WN User Manual

1
Projector
CP-D27WN/CP-D32WN/CP-DW25WN
User's Manual (detailed)  
Operating Guide
Thank you for purchasing this projector.
►Before using this product, please read all manuals for this 
product. Be sure to read “Safety Guide” first. After reading them, store them in a 
safe place for future reference. WARNING
• The information in this manual is subject to change without notice.
• The illustrations in this manual are for illustrative purposes. They may differ 
slightly from your projector.
• The...

2
Contents
Introduction  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .3
Features  . . . . . . . . . . . . . . . . . . . . . . 3
Checking the contents of package ...3
Fastening the lens cover  ..........4
Part names  . . . . . . . . . . . . . . . . . . . . 5
Setting up   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .8
Arrangement  ................... 8
Connecting with your devices .....10
Connecting to a power supply .....16
Using the security bar and slot  . . . .16
Remote control   . . . . . . . . . ....

3
Introduction
• Keep the original packing materials, for future reshipment. Be sure 
to use the original packing materials when moving the projector. Use special 
caution for the lens. NOTE
Introduction
The projector provides you with the broad use by the following features.
Checking the contents of  package
ü      The unique optics system produces a large projected image in a short 
distance, which provides you with various ways of use.
ü     The double layer filter system is expected to function...

4
Introduction
Fastening the lens cover
To avoid losing the cover, please fasten the lens 
cover to the projector using the included strap.Put the strap end into the slit of the lens 
cover with the knot on the side of the lens. 
Make sure that the strap is inserted to the 
end of the slit. Fasten the strap to the strap hole as shown 
in the figure for step 1. Please note that the 
knot on the strap is used to fasten it to the 
lens cover in step 2.
1.
2.
►Do not hang the 
lens cover in front of the lens...

5
Introduction
(1) Control panel (6)
(2)   Lamp cover (
103) 
The lamp unit is inside.
(3) Remote sensor (
17)
(4) Lens (
107)
(5)   AC IN (AC inlet) (
16)
(6) Ports (
6)
(7) Exhaust vent
(8) Speaker (
13, 21, 48)
(9) Elevator feet (x 2) (
24)
(10) Spacer (
24)
(11 ) Security slot (
16)
(12) Security bar (
16)
(13) Strap hole (
4)
(14) FOCUS ring (
24)
(15)   Filter cover (
105) 
The air filter and intake 
vent are inside.
(16) Intake vents
►HOT! : Do not touch around the lamp cover and the...

6
Introduction
Control panel
(1) STANDBY/ON button (
19)
(2) INPUT button (
21)
(3) POWER indicator (
19, 110)
(4) TEMP indicator (
110)
(5) LAMP indicator (
110)
(6)   MENU / Cursor button (
29)
Ports (
10 ~ 15)
(1) USB TYPE A port (x2)
(2) LAN  port 
(3) HDMI port 
(4) USB TYPE B port 
(5) MIC port 
(6) AUDIO IN1 port 
(7) AUDIO IN2 port 
(8) AUDIO IN3(L,R)  ports  (9)  
AUDIO OUT (L,R)  ports
(10) COMPUTER IN1 port 
(11) COMPUTER IN2 port 
(12) MONITOR OUT port 
(13) CONTROL port
(14) VIDEO...

7
Introduction
Remote control
(1) VIDEO button (
22) 
(2) COMPUTER button (
22)
(3) SEARCH  button (
23)
(4) STANDBY /ON button (
19)
(5) ASPECT button (
23)
(6) AUTO button (
25)
(7) BLANK button (
28)
(8) MAGNIFY - ON button (
27)
(9) MAGNIFY - OFF  button (
27)
(10) MY SOURCE/DOC.CAMERA  button  
(
22, 60)
(11) VOLUME - button (
21)
(12) PAGE UP button (
18)
(13) PAGE DOWN button (
18)
(14) VOLUME + button (
21)
(15) MUTE button (
21)
(16) FREEZE button (
28)
(17) MY BUTTON - 1 button...

8
Setting up
Setting up
(continued on next page) Install the projector according to the environment and manner the projector will be 
used in.
Arrangement
Refer to table T- 1 or T- 2 and figures F-1 and F-2 at the end of User’s Manual (concise) to 
determine the screen size and projection distance.
The values shown in the table are calculated for a full size screen.
  
a  Screen size (diagonal)   b  Projection distance (±8%)   c1 , c2  Screen heigh t (±8%)
•  For the case of installation in a special...

9
(continued on next page)
Setting up
Arrangement (continued)
►Place the projector in a cool place, and ensure that there is 
sufficient ventilation. The high temperature of the projector could cause fire, 
burns and/or malfunction of the projector.
•   Do not stop-up, block or otherwise cover the projector's vents.
•   Keep a space of 30 cm or more between the sides of the projector and other 
objects such as walls.
• Do not place or attach anything that would block the lens or vent holes.
• Do not...

10
Setting up
Before connecting the projector to a device, consult the manual of the device to 
confirm that the device is suitable for connecting with this projector and prepare 
the required accessories, such as a cable in accord with the signal of the device. 
Consult your dealer when the required accessory did not come with the product or 
the accessory is damaged.
After  making  sure  that  the  device  and  projector  are  turned  off,  connect  them 
following the instructions below.
►Use only the...