Hitachi Projector CP-A222WN User Manual

61
OPTION menu
Item Description
MY BUTTONThis item is to assign one of the following functions to MY BUTTON 
1/2 on the remote control (
6).
(1)  Use the ▲/▼ buttons on the MY BUTTON menu to select a MY 
BUTTON - (1/2) and press the ► or ENTER button to display the 
MY BUTTON setup dialog. 
(2)  Then using the ▲/▼/◄/► buttons sets one of the following 
functions to the chosen button. Press the ENTER or INPUT 
button to save the setting.
• LAN: Selects input from LAN port.
• USB TYPE A: Selects input...

62
OPTION menu
Item Description
MY BUTTON
(Continued)•  ACTIVE IRIS: Changes the active iris mode.
• PICTURE MODE: Changes the PICTURE MODE (
33).
•  
FILTER RESET: Displays the filter time reset confirmation dialogue (60).
•  TEMPLATE: Makes the template pattern selected to the 
TEMPLATE item (
56) appear or disappear.
•  AV MUTE: Turns the picture and audio on/off.
•  D-ZOOM: Turns the D-ZOOM mode on/off. When the D-ZOOM 
mode is on, use the ◄/► cursor buttons to adjust the 
magnification ratio.
•...

63
OPTION menu
Item Description
SERVICESelecting this item displays the SERVICE 
menu.
Select an item using the ▲/▼ buttons, and 
press the ► button or the ENTER button 
on the remote control to execute the item.
ALTITUDE
Using the ▲/▼ buttons switches the rotation speed of the cooling 
fans. If the projector is used at an altitude of about 1600 m or higher, 
select HIGH. Otherwise, select NORMAL. Note that the projector is 
noisier when the HIGH is selected.
HIGH 
 NORMAL
AUTO ADJUST
Using the ▲/▼...

64
OPTION menu
Item Description
SERVICE
(continued)KEY LOCK
(1)  Use the ▲/▼ buttons to select CONTROL PANEL or REMOTE 
CONTROL.
(2) Use the ◄/► buttons to turn the key lock function on/off.
When ON is selected, all buttons on the projector or remote control 
except the STANDBY/ON button are locked.
• Please use this function to prevent tampering or accidental 
operation. 
• It is not possible to set both CONTROL PANEL and REMOTE 
CONTROL to ON.
LENS DOOR LOCK
Use the ▲/▼ cursor buttons to turn on/off...

65
OPTION menu
Item Description
SERVICE
(continued)REMOTE FREQ.
(1)  Use the ▲/▼ button to change the projector's remote sensor 
frequency setting (
17, 18).
1:NORMAL 
 2:HIGH
(2)  Use the ◄/► button to change the 
projector's remote sensor on or off.
ON 
 OFF
The factory default setting is for both 1:NORMAL and 2:HIGH to be 
on. If the remote control does not function correctly, disable either of 
them.
It's not possible to disable both options at the same time.
COMMUNICATION
Selecting...

66
OPTION menu
Item Description
SERVICE
(continued)
COMMUNICATION
(continued)
COMMUNICATION TYPE
Select the communication type for transmission via 
the CONTROL port.
NETWORK BRIDGE: 
Select this type, if it is required 
to control an external device as a network terminal, 
via this projector from the computer. 
The CONTROL port doesn't accept RS-232C  
commands (
Network Bridge Function in the 
User’s Manual - Network Guide
)
OFF: Select this mode to receive RS-232C 
commands using the CONTROL...

67
OPTION menu
Item Description
SERVICE
(continued)
COMMUNICATION
(continued)
RESPONSE LIMIT TIME
Select the time period to wait for receiving 
response data from other device communicating by 
the NETWORK BRIDGE and the HALF-DUPLEX 
through the CONTROL port.
OFF 
 1s 
 2s 
 3s
    
OFF: Select this mode if it is not required to check 
the responses from the device that the projector 
sends data to. In this mode, the projector can 
send out data from the computer continuously.
1s /2s /3s: Select the...

68
OPTION menu
Item Description
SERVICE
(continued)
CLONING
(continued)
The following items are exempted.
OPTION: LAMP TIME, FILTER TIME, 
SERVICE(GHOST)
NETWORK: WIRELESS AND WIRED SETUP
(IP ADDRESS, SUBNET MASK, 
DEFAULT GATEWAY, DATE AND 
TIME), MY IMAGE, PRESENTATION
SECURITY: MY TEXT DISPLAY
• Operation is not available if SECURITY_
CLONNING LOCK is turned ON.
• The Screen_MyScreen can only be loaded.
CLONING load function on STANDBY MODE
• While the projector is in STANDBY MODE, push 
the INPUT...

69
OPTION menu
Item Description
SERVICE
(continued)
CLONING
(continued)
Load MyScreen data
•  Please save the image data as "pj_logo.bmp" or 
"pj_logo.gif" into USB memory.
•  Please note that the only compatible formats are 
as follows.
-File format
Windows BMP   bit/pixel: 2/4/8/15/16/24/32bit
Compression format : 
Without compression/RLE
GIF
-Image size: more than 36x36, less than 1280x800
•  If two kinds of file format are saved, "pj_logo.
bmp" will be registered into MyScreen...

70
OPTION menu
Item Description
SERVICE
(continued)
CLONING
(continued)
Loading function (continued)
•  Please note that the saved data of KEYSTONE 
under SETUP menu cannot be loaded if 
TRANSITION DETECTOR under SECURITY 
menu is ON.
•  
Please note that the saved data of START UP 
and MyScreen Lock under SCREEN menu cannot 
be loaded if  MyScreen PASSWORD under 
SECURITY menu is ON.
•  Please note that the saved data of MY TEXT 
WRITING cannot be loaded if MY TEXT 
PASSWORD under SECURITY menu is ON....