Hitachi Projector CP-A222WN User Manual

41
INPUT menu
Item Description
VIDEO FORMATThe video format for S-VIDEO port and VIDEO port can be set.
(1)  Use the ▲/▼ buttons to 
select the input port.
(2)  Using the ◄/► buttons 
switches the mode for video 
format.
AUTO  
  NTSC  
  PAL  
  SECAM
      N-PAL 
 M-PAL 
 NTSC4.43 
• This item is performed only for a video signal from the VIDEO port 
or the S-VIDEO port.
• The AUTO mode automatically selects the optimum mode.
• The AUTO operation may not work well for some signals. If the 
picture...

42
INPUT menu
Item Description
COMPUTER INThe computer input signal type for COMPUTER IN1 and IN2 ports 
can be set.
(1)  
Use the ▲/▼ buttons to select the COMPUTER IN port to be set.
(2)  Use the ◄/► buttons to select 
the computer input signal type.
AUTO 
 SYNC ON G OFF
• Selecting the AUTO mode allows  
you to input a sync on G signal or component video signal from the 
port. Please refer to “Technical” for the connection of component 
video input to COMPUTER IN1/2 port.
• In the AUTO mode, the...

43
INPUT menu
Item Description
RESOLUTIONThe resolution for the COMPUTER IN1 and COMPUTER IN2 input 
signals can be set on this projector.
(1)  In the INPUT menu select the RESOLUTION using the ▲/▼ 
buttons and press the ► button. 
The RESOLUTION menu will be  
displayed.
(2)  In the RESOLUTION menu select the 
resolution you wish to display using 
the ▲/▼ buttons.  
Selecting AUTO will set a resolution 
appropriate to the input signal.
(3)  Pressing the ► or ENTER button when 
selecting a STANDARD...

44
SETUP menu
SETUP menu
From the SETUP menu, items shown in the table 
below can be performed.
Select an item using the ▲/▼ cursor buttons, and 
press the ► cursor button or ENTER button to 
execute the item. Then perform it according to the 
following table.
Item Description
D-ZOOMUsing the ◄/► cursor buttons adjusts the magnification ratio.
Small 
 Large
• 
The on-screen menu might be displayed outside of the image 
display area depending on the adjustment value of the ASPECT, 
D-ZOOM, 
 KEYSTONE and...

45
SETUP menu
Item Description
PICT. POSIT. H
(CP-AW252WN)Using the ▲/▼ cursor buttons selects the horizontal picture
position.
LEFT 
 MID 
 RIGHT
The PICT. POSIT. H is not changed if any of the following cases 
apply.
• The ASPECT is set to 16:9 or 16:10.
• The input signal has an aspect ratio of 16:9, 16:10 or verticallly
smaller than 16:10, while ASPECT is set to NORMAL.
• Horizontal size of the displayed image is full on the effective
display area, while the ASPECT is set to NATIVE.
• One of the...

46
SETUP menu
Item Description
PERFECT FITThis item allows you to adjust the shape of the projected image in
each of the corners and sides.
(1) Choose a corner or side to adjust 
using the ▲/▼/◄/► buttons and press 
the ENTER or INPUT button.
(2) Adjust the distortion as below. Use 
the ▲/▼/◄/► buttons to adjust the 
position of the corner. Use the ▲/▼ 
buttons to adjust the distortion of the 
top or bottom side, after defining the 
adjusting position with the ◄/► buttons.
Use the ◄/► buttons to adjust...

47
SETUP menu
(continued on next page)
Item Description
PERFECT FIT
(continued)• While the distortion is adjusted with the PERFECT FIT function, 
keystone adjustment feature is unavailable. To correct the keystone 
distortion, reset the adjustment of all the corners and sides.
• The adjustable range of this correction will vary among inputs. For 
some input, this function may not work well.
• One adjustment position common to the top and bottom sides can 
be set. Also, another adjustment position common...

48
SETUP menu
Item Description
INSTALLATIONPressing the ►button displays the dialog for changing the 
INSTALLATION setting.
Use the ▲/▼ buttons to select the desired setting on the 
INSTALLATION dialog.
If TRANSITION DETECTOR is ON and the INSTALLATION status 
is changed, the TRANSITION DETECTOR ON alarm (
85) will be 
displayed when the projector is restarted.
STANDBY MODEUsing ▲/▼ buttons switches the standby mode setting between 
NORMAL and SAVING. 
NORMAL 
 SAVING
When SAVING is selected, the power...

49
SETUP menu
Item Description
MONITOR OUT
While the image signal from the input port chosen in step (1) is 
projected, the image signal from the input port selected in step (2) is 
output to MONITOR OUT port.
(1) Choose a picture input port using ▲/▼ buttons.
Choose STANDBY to select the picture  
output in the standby mode. 
(2)  Select one of the COMPUTER IN ports  
using ◄/► buttons.
Select OFF to disable the MONITOR OUT  
port for the input port or standby mode  
chosen in the step (1).
• You cannot...

50
AUDIO menu
AUDIO menu
From the AUDIO menu, items shown in the table below 
can be performed. Select an item using the ▲/▼ cursor 
buttons, and press the ► cursor button or the ENTER 
button to execute the item. Then perform it according to 
the following table.
Item Description
VOLUMEUsing the ◄/► buttons adjusts the volume.
Low 
 High
SPEAKERUsing the ▲/▼ buttons turns on/off the built-in speaker.
ON 
 OFF
When OFF is selected, the built-in speaker does not work.
AUDIO SOURCE
While the image signal...