Hitachi F7000 Instruction Manual

 
SAFETY - 1 
 SAFETY SUMMARY 
 
 
 
 
 
PRECAUTIONS ON SAFETY 
 
Before using the F-7000 fluorescence spectrophotometer, be sure to 
read the following safety instructions carefully. 
 
 
     General Safety Guidelines 
 
  Follow all the operating procedures provided in this manual. 
 Installation and maintenance of this instrument shall be carried 
out by service personnel qualified for this purpose. 
  Be sure to observe the warnings indicated on the product and in the 
instruction manual....

 
SAFETY - 2 
 SAFETY SUMMARY 
 
 
 
 
 
     General Safety Guidelines (Continued) 
 
NOTICE  :  Used to indicate an instruction for preventing damage 
to the product. 
NOTE  :  Used to indicate an instruction for ensuring correct 
use of the product and accurate analysis therewith. 
 
 
  Do not modify the instrument, replace parts that are not user-
serviceable, use non-specified parts, nor remove safety devices, as it 
could be hazardous.   
  Installation at delivery, maintenance and relocation...

 
SAFETY - 3 
 SAFETY SUMMARY 
 
 
 
 
 
Safety Notices on Fluorescence Spectrophotometer   
 
Electricity  
 
  Make sure that the fluorescence spectrophotometer is supplied with 
power of 100 V AC, 700 VA or more (50 Hz or 60 Hz).    If the power 
voltage fluctuates or noise is applied to the power line, the 
spectrophotometer may be adversely affected, resulting in any 
trouble in it.   
  Be sure to provide grounding connection together with power line 
connection.    The grounding resistance...

 
SAFETY - 4 
 SAFETY SUMMARY 
 
 
 
 
 
Protection against Computer Viruses   
 
If any program/data is damaged suddenly or an unexpected 
operation/screen is encountered, the personal computer is suspected of 
being infected by a computer virus.     
Computer viruses are malicious programs that sneak into personal 
computers to cause misbehavior or damage to data.    And, a program 
designed to offer protection against computer viruses is called a vaccine 
program.  
 
Possible causes of virus...

 
SAFETY - 5 
 SAFETY SUMMARY 
 
 
 
 
 
Turning On/Off Personal Computer   
 
Do not turn off power to the personal computer while the hard disk or 
floppy disk drive is active.    If power to the personal computer is turned 
off while the hard disk or floppy disk is being accessed, the personal 
computer may become faulty or data/software stored in it may be 
damaged.  
Before turning off power to the personal computer, be sure to quit the 
fluorescence spectrophotometer control/data processing program...

- i - 
CONTENTS 
 
 
PREFACE 
 
ABOUT THIS MANUAL 
 
IMPORTANT............................................................................................................... IMPORTANT-1 
Precautions on CE Conformity Marking...................... IMPORTANT-1 
1.  Electromagnetic Compatibility Requirement..... IMPORTANT-1 
2. Safety Requirement .......................................... IMPORTANT-1 
Information for Users on WEEE   
(only for EU Countries) ..................................................

- ii - 
1.3  Startup of FL Solutions Program .......................................... 1-12 
1.4 Screen Composition ............................................................. 1-16 
1.4.1  Basics of Window Operation ................................... 1-16 
1.4.2  Kinds of Windows .................................................... 1-20 
1.4.3  Data Processing Window ........................................ 1-21 
1.4.4  Explanation of Tool Buttons ..................................... 1-23 
1.5...

- iii - 
3.2.3 Monitor Tab.............................................................. 3-8 
3.2.4 Processing Tab........................................................ 3-10 
3.2.5 Report Tab ............................................................... 3-13 
3.3  Defining Your Samples ......................................................... 3-15 
3.3.1  Without Using Sample Table ................................... 3-15 
3.3.2  With Sample Table .....................................................

- iv - 
5.5  Displaying Data in a Bird’s-Eye View .................................... 5-18 
5.6  Contour Scale Expansion with Mouse .................................. 5-19 
5.7  Auto Scale Display of Data ................................................... 5-21 
5.8  Linking Trace Cursors from Peak Table............................... 5-23 
5.9 Data Printout......................................................................... 5-24 
 
6.  3-D TIME...

- v - 
7.13  Transfer of Data to Microsoft(R) Excel ................................. 7-33 
7.14  Pasting of Spectrum to Microsoft(R) Word........................... 7-35 
7.15  Pasting of Spectrum to Microsoft(R) Excel........................... 7-36 
7.16  Conversion of Data into ASCII Text File ............................... 7-37 
7.17  Conversion of Overlaid Spectra into ASCII File.................... 7-39 
7.18  Renaming Your Sample ....................................................... 7-42 
7.19...