Hitachi Cp-X615 Projector Users Manual

							


3.1 Configuring and controlling the projector via a web browser (continued)
3.1.7 Schedule Settings
Displays and configures schedule settings.
ItemDescription
DailyConfigures the daily schedule.
SundayConfigures the Sunday schedule.
MondayConfigures the Monday schedule.
TuesdayConfigures the Tuesday schedule.
WednesdayConfigures the Wednesday schedule.
ThursdayConfigures the Thursday schedule.
FridayConfigures the Friday schedule.
SaturdayConfigures the Saturday schedule.
Specific date No.1Configures the specific date (No.1) schedule.
Specific date No.2Configures the specific date (No.2) schedule.
Specific date No.3Configures the specific date (No.3) schedule.
Specific date No.4Configures the specific date (No.4) schedule.
Specific date No.5Configures the specific date (No.5) schedule.
3. Management with Web browser software 
						

							


3.1 Configuring and controlling the projector via a web browser (continued)
3. Management with Web browser software
The daily and weekly event items are shown below.
ItemDaily & Weekly Description
ScheduleClick [Enable] check box to enable the schedule.
Schedule ListDisplays the current schedule.
The specific date event items are shown below. 
ItemSpecific date (No.1-5) Description
ScheduleClick [Enable] check box to enable specific date (No.1-5) schedule.
Date (Month/Day)Configures the month and date.
Schedule ListDisplays the current specific date (No.1-5) schedule.
Click [Apply] button to save the settings.
To add additional functions and events, click [Add] button and set the following 
items.
ItemDescription
TimeConfigures the time to execute commands.
Command[Parameter]Configures the commands to be executed.
Power Configures the parameters for power control.
Input Source Configures the parameters for input switching.
Display Image Configures the parameters for display of transfer image data.
Click [Register] button to add new commands to the Schedule List.
Click [Delete] button to delete commands from the Schedule List.
Click [Reset] button to delete all commands from the Schedule List.
• After the projector is moved, check the date and time set for the 
projector before configuring the schedules. Strong shock may make the date 
and time settings (23) get out of tune.
NOTE 
						

							
3

3. Management with Web browser software
3.1 Configuring and controlling the projector via a web browser (continued)
3.1.8 Date/Time Settings
Displays and configures the date and time settings.
ItemDescription
Current DateConfigures the current date in year/month/day format.
Current TimeConfigures the current time in hour:minute:second format.
Daylight Savings TimeClick [ON] check box to enable daylight savings time and set the following items.
StartConfigures the date and time daylight savings time begins.
MonthConfigures the month daylight savings time begins (1~12).
WeekConfigures the week of the month daylight savings time begins (First, 2, 3, 4, Last).
DayConfigures the day of the week daylight savings time begins (Sun, Mon, Tue, Wed, Thu, Fri, Sat).
TimehourConfigures the hour daylight savings time begins (0 ~ 23).
minuteConfigures the minute daylight savings time begins (0 ~ 59).
EndConfigures the date and time daylight savings time ends.
MonthConfigures the month daylight savings time ends (1 ~ 12).
WeekConfigures the week of the month daylight savings time ends (First, 2, 3, 4, Last).
DayConfigures the day of the week daylight savings time ends (Sun, Mon, Tue, Wed, Thu, Fri, Sat).
TimehourConfigures the hour daylight savings time ends (0 ~ 23).
minuteConfigures the minute daylight savings time ends (0 ~ 59). 
						

							
4

3.1 Configuring and controlling the projector via a web browser (continued)
3. Management with Web browser software
ItemDescription
Time differenceConfigures the time difference. Set the same time difference as the one set on your PC. If unsure, consult your IT manager.
SNTPClick the [ON] check box to retrieve Date and Time information from the SNTP server and set the following items.
SNTP Server IP Address
Configures the SNTP server address in IP format.• The address allows not only IP address but also domain name if the valid DNS server is setup in the Network Settings. The maximum length of host or domain name is up 
to 55 characters.
CycleConfigures the interval at which to retrieve Date and Time information from the SNTP server (hours:minutes).
Click [Apply] button to save the settings.
• The new configuration settings are activated after restarting the 
network connection. When the configuration settings are changed, you must 
restart the network connection. You can restart the network connection by 
clicking [Network Restart] on the main menu.
• If you connect the projector to an existing network, consult a network 
administrator before setting server addresses.
• To enable the SNTP function, the time difference must be set. 
• The projector will retrieve Date and Time information from the time server and 
override time settings when SNTP is enabled.
• The internal clock’s time may not remain accurate. Using SNTP is 
recommended to maintain accurate time.
NOTE 
						

							
5

3. Management with Web browser software
3.1 Configuring and controlling the projector via a web browser (continued)
3.1.9 Security Settings
Displays and configures passwords and other security settings.
ItemDescription
Administrator authorityConfigures the Administrator ID and password.
Administrator IDConfigures the Administrator ID. The length of the text can be up to 32 alphanumeric characters. 
Administrator Password
Configures the Administrator password. The length of the text can be up to 255 alphanumeric characters. 
Re-enter Administrator PasswordReenter the above password for verification.
User authorityConfigures the User ID and password.
User IDConfigures the User ID. The length of the text can be up to 32 alphanumeric characters. 
User PasswordConfigures the User password. The length of the text can be up to 255 alphanumeric characters. 
Re-enter User PasswordReenter the above password for verification. 
						

							


3.1 Configuring and controlling the projector via a web browser (continued)
3. Management with Web browser software
Click [Apply] button to save the settings.
• The new configuration settings are activated after restarting the 
network connection. When the configuration settings are changed, you must 
restart the network connection. You can restart the network connection by 
clicking [Network Restart] on the main menu.
• Only numbers ‘0-9’ and alphabet ‘a-z’, ‘A-Z’ can be used.
NOTE
ItemDescription
Network ControlConfigures the Authentication password for the command control.
Authentication PasswordConfigures the Authentication password. The length of the text can be up to 32 alphanumeric characters.
Re-enter Authentication PasswordReenter the above password for verification.
SNMPConfigures the community name if SNMP is used.
Community nameConfigures the community name. The length of the text can 
be up to 4 alphanumeric characters. 
						

							
7

3. Management with Web browser software
3.1 Configuring and controlling the projector via a web browser (continued)
3.1.10 Projector Control
Controls the projector.
ItemDescription
Main
PowerTurns the power on/off.
Input SourceSelects the input source.
Picture ModeSelects the picture mode setting.
Blank On/OffTurns Blank on/off.
MuteTurns Mute on/off.
FreezeTurns Freeze on/off.
Magnify
Controls the magnify setting. In some input signal sources, it might stop “Magnify” even though it does not reach to maximum setting value.The variable range:• For a RGB or HDMI signal  0-48• For a video, component or s-video signal  0-16
Picture
BrightnessAdjusts the brightness setting.
ContrastAdjusts the contrast setting.
GammaSelects the gamma setting.
Color TempSelects the color temperature setting.
ColorAdjusts the color setting.
TintAdjusts the tint setting.
SharpnessAdjusts the sharpness setting.
Active IrisSelects the active iris setting.
MyMemory SaveSaves the MyMemory data.
MyMemory RecallRecalls the MyMemory data.
The items shown in the table below can be 
performed using the Projector Control menu. 
Select an item using the up and down arrow keys 
on the PC.
Most of the items have a submenu. Refer to the 
table below for details.
• The setting value may not match with the actual value if the user 
changes the value manually. In that case, please refresh the page by clicking 
[Refresh] button.
NOTE 
						

							
8

3.1 Configuring and controlling the projector via a web browser (continued)
3. Management with Web browser software
ItemDescription
Image
AspectSelects the aspect setting.
Over ScanAdjusts the over scan setting.
V PositionAdjusts the vertical position.
H PositionAdjusts the horizontal position.
H PhaseAdjusts the horizontal phase.
H SizeAdjusts the horizontal size.
Auto Adjust ExecutePerforms the automatic adjustment.
Input
ProgressiveSelects the progressive setting.
Video NRSelects the video noise reduction setting.
3D-YCSSelects the 3D-YCS setting.
Color SpaceSelects the color space.
ComponentSelects the component terminal setting.
C-Video FormatSelects the video format setting.
S-Video FormatSelects the s-video format setting.
HDMISelects the HDMI setting.
Frame Lock-RGB1Turns the frame lock-RGB1 function on/off.
Frame Lock-RGB2Turns the frame lock-RGB2 function on/off.
Frame Lock-HDMITurns the frame lock-HDMI function on/off.
RGB in-1Selects the RGB1 input signal type.
RGB in-2Selects the RGB2 input signal type. 
Setup
Auto Keystone ExecutePerforms the automatic keystone distortion correction.
Keystone VAdjusts the vertical keystone distortion setting.
Keystone HAdjusts the horizontal keystone distortion setting.
WhisperSelects the whisper mode.
MirrorSelects the mirror status. 
						

							
9

3.1 Configuring and controlling the projector via a web browser (continued)
3. Management with Web browser software
ItemDescription
Audio
VolumeAdjusts the volume setting.
TrebleAdjust the Treble setting.
BassAdjusts the Bass setting.
SRS WOWSelects the SRS WOW setting.
SpeakerTurns the built-in speaker on/off.
Audio-RGB1Assigns the AUDIO-RGB1 input port.
Audio-RGB2Assigns the AUDIO-RGB2 input port.
Audio-HDMIAssigns the AUDIO-HDMI input port.
Audio-VideoAssigns the AUDIO-VIDEO input port.
Audio-S-VideoAssigns the AUDIO-S-VIDEO input port.
Audio-ComponentAssigns the AUDIO-COMPONENT input port.
HDMI-AudioSelects the HDMI audio setting.
Screen
LanguageSelects the language for the OSD.
Menu Position VAdjusts the vertical Menu position.
Menu Position HAdjusts the horizontal Menu position.
BlankSelects the Blank mode.
StartupSelects the startup screen mode.
MyScreen LockTurns MyScreen lock function on/off.
MessageTurns the message function on/off.
Option
Auto SearchTurns the automatic signal search function on/off.
Auto KeystoneTurns the automatic keystone distortion correction function on/off.
Auto onTurns the auto on function on/off.
Auto offConfigures the timer to shut off the projector when no signal is detected.
My Button-1Assigns the functions for the MY BUTTON1 buttons on the included remote control.
My Button-2Assigns the functions for the MY BUTTON2 buttons on the included remote control.
Remote Receiv. FrontEnable/Disable remote receiv. front.
Remote Receiv. RearEnable/Disable remote receiv. rear.
Remote Receiv. TopEnable/Disable remote receiv. top.
Remote Freq. NormalEnables/Disables the remote control signal frequency normal.
Remote Freq. HighEnables/Disables the remote control signal frequency high. 
						

							
30

3.1 Configuring and controlling the projector via a web browser (continued)
3.1.11 Projector Status
3. Management with Web browser software
Displays and configures the current projector status.
ItemDescription
Error StatusDisplays the current error status
Lamp TimeDisplays the usage time for the current lamp.
Filter TimeDisplays the usage time for the current filter.
Power StatusDisplays the current power status.
Input StatusDisplays the current input signal source.
Blank On/OffDisplays the current Blank on/off status.
MuteDisplays the current Mute on/off status.
FreezeDisplays the current Freeze status.