Home > Hitachi > Projector > Hitachi Cp-X615 Projector Users Manual

Hitachi Cp-X615 Projector Users Manual

Here you can view all the pages of manual Hitachi Cp-X615 Projector Users Manual. The Hitachi manuals for Projector are available online for free. You can easily download all the documents as PDF.

Page 1


Projector
CP-X705/CP-X615
User's Manual (detailed)  
Network Guide
Thank you for purchasing this projector.
This projector has the network function that brings you the following main features.
►Before using this product, be sure to read all manuals for this 
product.  
After reading them, store them in a safe place for future reference.
WARNING
• The information in this manual is subject to change without notice.
• The manufacturer assumes no responsibility for any errors that may appea\
r in...

Page 2



Content
Content 

About this manual ........................................................................\
..1
Content ........................................................................\
..................2
1. Main functions  ........................................................................\
...3
1.1 Configuring and controlling via a web browser  ...........................................3
1.2 e-SHOT (Still image Transfer) Display...

Page 3

3

1. Main functions
1. Main functions
1.1 Configuring and controlling via a web browser
You can adjust or control the projector via a network from a web browser on a PC 
that is connected to the same network.
Logon the network from the web browser and it offers the menus to configure the 
network settings, monitor the projector and so on.
1.2 e-SHOT (Still image Transfer) Display
Image files can be sent via the network, and up to 4 image data can be stored in 
the projector and displayed on screen one...

Page 4

4

2. Equipment connection and network setting
2.1 Required equipment preparation
2. Equipment connection and network setting
The following equipments are required to connect the projector to your PC through 
the network.
PC : 1) equipped with the network feature 
         2) installed a web browser software (11)
 LAN cable : CAT-5 or greater 

Page 5

5

2. Equipment connection and network setting
2.2 Manual network connection setting
2.2.1 Equipments connection
Connect the projector and PC with a LAN cable. 
* Before connecting with an existing network, contact the network administrator. 
Next, please check the PC setting as explained below.
2.2.2 Network settings
This is the explanation of network connection settings for Windows XP and 
Internet Explorer.
1) Log on to Windows XP as administrator authority. (*)
2) Open “Control Panel” from “Start”...

Page 6



2. Equipment connection and network setting
2.2 Manual network connection setting (continued)
7) Set IP address, subnet mask and default gateway for PC.
Fig. 2.2.2.d “Internet Protocol (TCP/IP) Properties” window
5)  Open “Local Area Connection Properties” window you use for network device. 
(Fig. 2.2.2.c)
6)   Set used protocol as “TCP/IP” and open “Internet Protocol (TCP/IP) Properties” 
window.
Fig. 2.2.2.c “Local Area Connection Properties” window 

Page 7

7

2. Equipment connection and network setting
2.2 Manual network connection setting (continued)
[About IP address]
■ Setting manually
The Network address portion included in the IP address set into your PC should 
be common with projector’s one. And the entire IP address in the PC should not 
be overlapped with other equipments in the same network, including the projector.
The projector’s initial settings are as follows.
IP address: 192.168.1.10
Subnet mask: 255.255.255.0
(Network address: 192.168.1 in...

Page 8

8

2. Equipment connection and network setting
2.2 Manual network connection setting (continued)
2)  Click “Connections” tab and then click [LAN Settings] button to open “Local 
Area Network (LAN) settings”. (Fig. 2.2.3.c)
Fig. 2.2.3.b “Internet Properties” window
2.2.3 “Internet Option” setting
1)  Click “Internet Options” in “Network and Internet Connections” window 
 
(Fig. 2.2.3.a) to open “Internet Properties” window. (Fig.2.2.3.b)
Fig. 2.2.3.a “Network and Internet Connections” window
Click
Click 

Page 9

9

2. Equipment connection and network setting
2.2 Manual network connection setting (continued)
Fig. 2.2.4 “Logon Menu”
2.2.4 Check connection
Check PC and projector are connected properly here. If it is not connected, check 
cable connections and settings are properly or not.
1) Start browser in PC and specify following URL, then click “Go” button.
Fig. 2.2.3.c “Local Area Network (LAN) Settings” window
3) Uncheck all boxes in “Local Area Network (LAN) Settings” window. (Fig. 2.2.3.c)
URL:...

Page 10

0

3. Management with Web browser software
Configuring and Controlling the Projector via a Web Browser
You can change the settings of or control the projector via a network by using a 
web browser from a PC that is connected to the same network.
(11)
E-mail Alerts
The projector can automatically send an alert to specified e-mail addresses when 
the projector requires maintenance or has encountered an error.
(32)
Projector Management using SNMP
This projector is SNMP (Simple Network Management...
Start reading Hitachi Cp-X615 Projector Users Manual

Related Manuals for Hitachi Cp-X615 Projector Users Manual

All Hitachi manuals