Hitachi Cp-X615 Projector Users Manual



3. Management with Web browser software
3.1  Configuring  and  controlling  the  projector  via  a  web 
browser
You can adjust or control the projector via a network from a web browser on a PC 
that is connected to the same network.
• Internet Explorer 5.5 or later is required.
• If JavaScript is disabled in your web browser configuration, you must enable 
JavaScript in order to use the projector web pages properly. See the Help files 
for your web browser for details on how to enable...



3. Management with Web browser software
When configuring or controlling the projector via a web browser, an ID and 
password are required. There are two types of IDs, Administrator ID and User ID. 
The following chart describes the differences between Administrator and User IDs.
3.1 Configuring and controlling the projector via a web browser (continued)
ItemDescriptionAdministratorUser
Network InformationDisplays the projector’s current network configuration settings.√√
Network...

3

3. Management with Web browser software
3.1 Configuring and controlling the projector via a web browser (continued)
3.1.1 Logon
Refer to the following for configuring or controlling the projector via a web browser. 
1)  Enter 
“http://192.168.1.10/” into the address 
bar of the web browser and press “Enter” 
key or click “Go” button.  The screen in Fig. 
3.1.1a will be displayed.
2)   Enter your ID and password and click 
[Logon].
Example: If the IP address of the projector is set to...

4

3.1 Configuring and controlling the projector via a web browser (continued)
3.1.2 Network Information
All screen drawings in this manual are shown 
when you logon with the Administrator ID. 
Any functions that are available only for the 
Administrator will not be shown when you logon 
with the User ID. Refer to the table. (13)
3. Management with Web browser software
Displays the projector’s current network configuration settings.
ItemDescription
Projector NameDisplays the projector name...

5

3. Management with Web browser software
3.1 Configuring and controlling the projector via a web browser (continued)
3.1.3 Network Settings
Displays and configures network settings.
ItemDescription
IP ConfigurationConfigures network settings.
DHCP ONEnables DHCP.
DHCP OFFDisables DHCP.
IP AddressConfigures the IP address when DHCP is disabled.
Subnet MaskConfigures the subnet mask when DHCP is disabled.
Default GatewayConfigures the default gateway when DHCP is disabled.
Projector Name
Configures...



3.1 Configuring and controlling the projector via a web browser (continued)
3. Management with Web browser software
• The new configuration settings are activated after restarting the 
network connection. When the configuration settings are changed, you must 
restart the network connection. You can restart the network connection by 
clicking [Network Restart] on the main menu.
• If you connect the projector to an existing network, consult a network 
administrator before setting server...

7

3. Management with Web browser software
3.1 Configuring and controlling the projector via a web browser (continued)
3.1.4 Port Settings
Displays and configures communication port settings.
ItemDescription
Network Control Port1 (Port:23)Configures command control port 1 (Port:23).
Port openClick [Enable] check box to use port 23.
AuthenticationClick [Enable] check box when authentication is required for this port.
Network Control Port2 (Port:9715)Configures command control port 2 (Port:9715)....

8

3.1 Configuring and controlling the projector via a web browser (continued)
3.1.5 Mail Settings
3. Management with Web browser software
Displays and configures e-mail addressing settings.
ItemDescription
Send mailClick [Enable] check box to use the e-mail function. Configure the conditions for sending e-mail under the Alert Settings.
SMTP Server IP Address
Configures the address of the mail server in IP format.• The address allows not only IP address but also domain name if the valid DNS server...

9

3.1 Configuring and controlling the projector via a web browser (continued)
3.1.6 Alert Settings
Displays and configures failure & alert settings.
Alert ItemDescription
Cover ErrorThe lamp cover has not been properly fixed.
Fan ErrorThe cooling fan is not operating.
Lamp ErrorThe lamp does not light, and there is a possibility that interior portion has become heated.
Temp ErrorThere is a possibility that the interior portion has become heated.
Air Flow ErrorThe internal temperature is rising....

0

3.1 Configuring and controlling the projector via a web browser (continued)
3. Management with Web browser software
The Alert Items are shown below.
Setting ItemDescription
Alarm TimeConfigures the time to alert.(Only Lamp Time Alarm and Filter Time Alarm.)
SNMP TrapClick [Enable] check box to enable SNMP Trap alerts.
Send MailClick [Enable] check box to enable e-mail alerts.(Except Cold Start and Authentication Failure.)
Mail Subject
Configures the subject line of the e-mail to be sent. 
The...