Hitachi Cp-X206 Projector Users Manual

5

OPTION menu
OPTION menu (continued)
ItemDescription
SECURITY(continued)
4.2-4  Move  the  cursor  to  the  right  side  of  the PA S S W O R D   A G A I N   b o x   a n d   p r e s s   t h e ►  button  to  display  the  PASSWORD  for about  20  seconds,  please  make  note  of  the PASSWORD during this time.Pressing the ENTER button will return to the TRANSITION DETECTOR on/off menu.• Please do not forget your Transition Detector PASSWORD.
4.3 Setting the Transition Detector off
4.3-1  Follow...

5

ItemDescription
SECURITY(continued)
5. Using the MY TEXT PASSWORD function
This item allows you to display your own message (MY TEXT) on the START UP screen and INPUT-INFORMATION. It can be protected by a password to prevent it from being overwritten.
5.1 Writing the MY TEXT
(1)  Use the ▲/▼ buttons on the SECURITY menu to select the MY TEXT WRITING menu and press the ► button. The MY TEXT WRITING dialog will be displayed.
(2)  The current MY TEXT will be displayed on the first 3 lines. If not...

53

ItemDescription
SECURITY(continued)
5.3 Turning on the MY TEXT PASSWORDThe MY TEXT PASSWORD function can prevent the MY TEXT from being overwritten.
5.3-1  
Turning on the MY TEXT PASSWORD function
(1)   Use the ▲/▼ buttons on the SECURITY menu 
to select the MY TEXT PASSWORD menu and press the ► button to display the MY TEXT PASSWORD on/off menu.
5.3-2   Setting the MY TEXT PASSWORD
(1)   Display the MY TEXT PASSWORD on/off menu 
using the procedure in 5.3-1
(2)   Use the ▲/▼ buttons on the MY TEXT...

54

Remember that incorrect network settings on this projector 
may cause trouble on the network. Be sure to consult with 
your network administrator before connecting to an existing 
access point on your network.
From the NETWORK menu, items shown in the table below 
can be performed.
Select an item using the ▲/▼ cursor buttons, and press the ►cursor button or 
ENTER button to execute the item. Then perform it according to the following 
table.
See the User’s Manual - Network Guide for details of...

55

NETWORK Menu
NETWORK Menu (continued)
ItemDescription
SETUP(continued)
IP ADDRESS
Use the ▲/▼/◄/► buttons to enter the IP ADDRESS. This function can only be used when DHCP is set to OFF.
• The IP ADDRESS is the number that identifies this projector on the network. You cannot have two devices with the same IP ADDRESS on the same network.• The IP ADDRESS “0.0.0.0” is prohibited.
SUBNET MASK
Use the ▲/▼/◄/► buttons to enter the same SUBNET MASK used by your PC. This function can only be used when DHCP...

56

NETWORK Menu
NETWORK Menu (continued)
ItemDescription
PROJECTOR NAME(1)  
Use the▲/▼ buttons on the NETWORK Menu to select the 
PROJECTOR NAME menu and press the ► button. The PROJECTOR NAME dialog will be displayed.
(2)   
The current PROJECTOR NAME 
will be displayed on the first 3 lines. If not yet written, the lines will be blank. Use the ▲/▼/◄/► buttons and the ENTER or INPUT button to select and enter characters. The RESET button can be used to erase 1 character at a time. Also if you move the...

57

NETWORK Menu
NETWORK Menu (continued)
ItemDescription
MY IMAGE
Selecting this item displays the MY IMAGE menu. The application software “PJImage” is required to store image(s) into the projector.Use the ▲/▼ buttons to select an item which is a still image by the MY IMAGE ( MY IMAGE (Still Image Transfer) Display of the User’s Manual - Network Guide) and the ► or ENTER button to display the image.
• The item without image stored cannot be selected.• The image names are each displayed in 16...

58

NETWORK Menu
NETWORK Menu (continued)
ItemDescription
INFORMATION
Selecting this item displays the NETWORK -INFORMATION- dialog for confirming the network settings.
• The PROJECTOR NAME is displayed in the “PROJECTOR NAME” field. Nothing (blank) is shown in the “PROJECTOR NAME” field until you setup the item (56).• When the voltage level of the battery for the built in clock decreases, the set time may become incorrect even though accurate date and time are input. Replace the battery suitably...

59

C .C  . (Closed Caption) menu
The closed caption setting can be changed through C.C. 
menu in the advance menu. Please select the item that you 
will change using ▲/▼ cursor buttons.
• The C.C. (Closed Caption) is the function that displays a 
transcript or dialog of the audio portion of a video, files or 
other presentation or other relevant sounds. It is required 
to have NTSC format video or 480i@60 format component 
video source supporting C.C. feature to utilize this function.
C.C. (Closed...

60

Maintenance 
Maintenance
A lamp has finite product life. Using the lamp for long periods of time could cause 
the pictures darker or the color tone poor. Note that each lamp has a different 
lifetime, and some may burst or burn out soon after you start using them. 
Preparation of a new lamp and early replacement are recommended. To prepare 
a new lamp, make contact with your dealer and tell the lamp type number .
Replacing the lamp
Type number : DT00841
1.Turn the projector off, and unplug the power...