Hitachi Cp-X206 Projector Users Manual


Projector
CP-X206/CP-X306
User's Manual (detailed)  
Operating Guide
Thank you for purchasing this projector.
►Before using this product, please read all manuals for this 
product. Be sure to read “Safety Guide” first. After reading them, store them in a 
safe place for future reference.
WARNING
• The information in this manual is subject to change without notice.
• The manufacturer assumes no responsibility for any errors that may appear in 
this manual.
• The reproduction, transfer or copy...



Contents
Contents
About this manual  .  .  .  .  .  .  .  .  .  .  .1
Contents  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .2
Projector features  .  .  .  .  .  .  .  .  .  .  .3
Preparations   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .3
Contents of package . . . . . . . . . . . . .3
Fastening the lens cover . . . . . . . . . .3
Part names  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .4
Projector . . . . . . . . . . . . . . . . . . . . . .4
Control panel . . . . . . . . . . . . . . . ....

3

Projector features / Preparations
• Keep the original packing materials, for future reshipment. Be sure 
to use the original packing materials when moving the projector. Use special 
caution for the lens.
NOTE
Projector features
The projector provides you with the broad use by the following features.
Preparations
Contents of  package
Please see the “Contents of package” section in the User’s Manual (concise) 
which is a book. Your projector should come with the items shown there. Contact 
immediately...

4

Part names
Part names
Projector
(1)  Lamp cover (60) The lamp unit is inside.(2) Focus ring (18)(3) Zoom ring (18)(4) Control panel (5)(5) Elevator buttons (x 2) (18)(6) Elevator feet (x 2) (18)(7) Remote sensor (13)(8) Lens (65)(9) Lens cover (3)(10) Intake vents
(11)   Filter cover (62) The air filter and intake vent are inside.(12) Speaker (36)(13) Exhaust vent
(14)  AC IN (AC inlet) (12)(15) Power switch (15)(16) Rear panel (5)(17) Security bar (12)(18) Security slot (12)
(19)...

5

Part names
Control panel
(1) STANDBY/ON button (15)(2) INPUT button (16, 22)
(3)  MENU button (22) It consists of four cursor buttons.(4) POWER indicator (15, 67)(5) TEMP indicator (67)(6) LAMP indicator (67)
Rear panel (10)
(1) AUDIO IN1 port (2) AUDIO IN2 port (3) AUDIO OUT port (4) COMPUTER IN1 port (5) COMPUTER IN2 port (6) MONITOR OUT port (7) Shutdown switch (68)(8) CONTROL port 
►Use the shutdown switch only when the projector is not 
turned off by normal procedure, since pushing this...

6

Part names
Remote control
(1) VIDEO button (17)(2) COMPUTER button (16)(3) SEARCH button (17)(4) STANDBY/ON button (15)(5) ASPECT button (17)(6) AUTO button (19)(7) BLANK button (21)(8) MAGNIFY - ON button (20)(9) MAGNIFY - OFF button (14, 20)(10) MY SOURCE/DOC.CAMERA button (43)(11) VOLUME - button (16)(12) PAGE UP button (14)(13) PAGE DOWN button (14)(14) VOLUME + button (16)(15) MUTE button (16)(16) FREEZE button (21)(17) MY BUTTON - 1 button (43)(18) MY BUTTON - 2 button...

7

Setting up
Setting up
Install the projector according to the environment and manner the projector will be 
used in.
On a horizontal surface
Suspended from the ceiling
• Keep a space of 30 cm or more 
between the sides of the projector 
and other objects such as walls.
• Consult with your dealer before 
a special installation such as 
suspending from a ceiling.
   Screen size(diagonal)
4 : 3 screen16 : 9 screen
  Projection distance Screen heightScreen height Projection distance Screen height Screen...

8

Setting up
On a horizontal surface
Suspended from the ceiling
• Keep a space of 30 cm or more 
between the sides of the projector 
and other objects such as walls.
• Consult with your dealer before 
a special installation such as 
suspending from a ceiling.
   Screen size(diagonal)
4 : 3 screen16 : 9 screen
  Projection distance Screen heightScreen height Projection distance Screen height Screen height min.max.min.max.inchmminchminchcminchcminchminchminchcminchcminch...

9

Setting up
►Place the projector in a stable horizontal position. If the 
projector falls or is knocked over, it could cause injury and/or damage to the 
projector. Using a damaged projector could then result in fire and/or electric 
shock.
•  Do not place the projector on an unstable, slanted or vibrational surface such 
as a wobbly or inclined stand.
•   Do not place the projector on its side, front or rear position. 
•   Consult with your dealer before a special installation such as suspending from...

0

Setting up
Connecting your devices
Be sure to read the manuals for devices before connecting them to the projector. 
Make sure that all the devices are suitable to be connected with this product, and 
prepare the cables required to connect. Please refer to the following illustrations 
to connect them.
►Do not disassemble or modify the projector and accessories.
►Be careful not to damage the cables, and do not use damaged cables.
WARNING
►Turn off all devices and unplug their power cords prior to...