Hitachi Cp-X206 Projector Users Manual

3

INPUT menu
INPUT menu
From the INPUT menu, items shown in the table below 
can be performed.
Select an item using the ▲/▼ cursor buttons, and 
press the ► cursor button or ENTER button to execute 
the item. Then perform it according to the following 
table.
ItemDescription
PROGRESSIVE
Using the ▲/▼ buttons switches the progress mode.
TV ó FILM ó TURN OFF     
• This function is performed only for an interlaced signal at the VIDEO or S-VIDEO input, and for 480i@60 or 576i@50 signal at the...

3

INPUT menu
INPUT menu (continued)
ItemDescription
VIDEO FORMAT
The video format for S-VIDEO port and VIDEO port can be set.
(1) Use the ◄/► buttons to select the input port.
(2)  Using the ▲/▼ buttons switches the mode 
for video format.
AUTO  ó  NTSC  ó  PAL  ó  SECAM 
      N-PAL ó M-PAL ó NTSC4.43 
• This item is performed only for a video signal from VIDEO port or S-VIDEO port. • The AUTO mode automatically selects the optimum mode.• The AUTO operation may not work well for some signals. If...

33

INPUT menu
INPUT menu (continued)
ItemDescription
RESOLUTION
The resolution for the COMPUTER IN1 and IN2 input signals can be set on this projector.
(1) In the INPUT menu select the RESOLUTION using the ▲/▼ buttons and press the ► button.The RESOLUTION menu will be displayed.
(2) In the RESOLUTION menu, select the resolution you wish to display using the ▲/▼ buttons. Selecting AUTO will set a resolution appropriate to the input signal.
(3) STANDARDPressing the ► or ENTER button when selecting a...

34

SETUP menu
SETUP menu
From the SETUP menu, items shown in the table below 
can be performed.
Select an item using the ▲/▼ cursor buttons, and press 
the ► cursor button or the ENTER button to execute the 
item. Then perform it according to the following table.
ItemDescription
AUTO 
KEYSTONE EXECUTE
Selecting this item performs the automatic keystone distortion correction. Projector automatically corrects vertical keystone distortion due to the (forward/backward) setup angle by itself.
This function...

35

SETUP menu
SETUP menu (continued)
ItemDescription
WHISPER
Using the ▲/▼ buttons turns off/on the whisper mode.
NORMAL ó WHISPER
• When WHISPER is selected, acoustic noise and screen brightness are reduced.
MIRROR
Using the ▲/▼ buttons switches the mode for mirror status.
NORMAL  ó  H:INVERT  ó  V:INVERT  ó  H&V:INVERT    
If the Transition Detector is TURN ON and MIRROR status is changed, Transition Detector Alarm (50) will be displayed when projector is restarted after the power switch is turned...

36

AUDIO menu
AUDIO menu
From the AUDIO menu, items shown in the table below 
can be performed. Select an item using the ▲/▼ cursor 
buttons, and press the ► cursor button or the ENTER 
button to execute the item. Then perform it according to 
the following table.
ItemDescription
VOLUMEUsing the ▲/▼ buttons adjusts the volume.
High ó Low
SPEAKER
Using the ▲/▼ buttons turns on/off the built-in speaker.
TURN ON ó TURN OFF
When TURN OFF is selected, the built-in speaker does not work.
AUDIO
The...

37

SCREEN menu
SCREEN menu
From the SCREEN menu, items shown in the table below 
can be performed.
Select an item using the ▲/▼ cursor buttons, and press 
the ► cursor button or ENTER button to execute the item. 
Then perform it according to the following table.
ItemDescription
LANGUAGE
Using the ▲/▼ buttons switches the OSD (On Screen Display) language.
�TÜRKÇE�POLSKI�SUOMI�
ENGLISH � FRANÇAIS � DEUTSCH � ESPAÑOL � ITALIANO�NORSK�NEDERLANDS�PORTUGUÊS�РУССКИЙ � SVENSKA � ¿—µ � 4P¨
[ � 1T
[ �...

38

ItemDescription
START UP
Using the ▲/▼ buttons switches the mode for the start-up screen.The start-up screen is a screen displayed when no signal or an unsuitable signal is detected.
MyScreen ó ORIGINAL ó TURN OFF          
Feature
MyScreenScreen can be registered by the MyScreen item (below).
ORIGINALScreen preset as the standard screen.
TURN OFFPlain black screen.
• To avoid remaining as an afterimage, the MyScreen or ORIGINAL screen will change to the BLANK screen (37) after several minutes. If...

39

SCREEN menu
SCREEN menu (continued)
ItemDescription
MyScreen(continued)
When the registration is completed, the registered screen and the following message are displayed for several seconds:“MyScreen registration is finished.”If the registration failed, the following message is displayed:“A capturing error has occurred. Please try again.” • This function cannot be selected when the TURN ON is selected to the MyScreen Lock item (below).• This function cannot be selected when TURN ON is selected to...

40

SCREEN menu
SCREEN menu (continued)
ItemDescription
SOURCE NAME
Each input port for this projector can have a name applied to it.
(1) Use the ▲/▼ buttons on the SCREEN menu to 
select SOURCE NAME and press the ► button. 
The SOURCE NAME menu will be displayed.
(2) Use the ▲/▼ buttons on the SOURCE 
NAME menu to select the port to be named 
and press the ► button. Right side of the 
menu is blank until a name is specified.
The SOURCE NAME dialog will be displayed.
(3) The current name will be...