Hitachi Cp-D10 Users Manual

41
SCREEN menu
Item Description
C.C.
(Closed Caption)The C.C. is the function that displays a 
transcript or dialog of the audio portion of 
a video, files or other presentation or other 
relevant sounds. It is required to have NTSC 
format video or 480i@60 format component 
video source supporting C.C. feature to 
utilize this function.
It may not work properly, depending on equipment or signal source. 
In this case, please turn off the Closed Caption.
DISPLAY
Select the Closed Caption DISPLAY setting...

42
OPTION menu
OPTION menu
From the OPTION menu, items shown in the table 
below can be performed.
Select an item using the ▲/▼ cursor buttons, 
and press the ► cursor (or the ENTER) button to 
execute the item, except for the items LAMP TIME 
and FILTER TIME. Then perform it according to the 
following table.
Item Description
AUTO SEARCHUsing the ▲/▼ cursor buttons turns on/off the automatic signal 
search function.
ON 
 OFF
When the ON is selected, detecting no signal automatically cycles 
through...

43
OPTION menu
Item Description
AUTO
POWER OFF
Using the ▲/▼ cursor buttons adjusts the time to count down to 
automatically turn the projector off.
Long (max. 99 minutes) 
 Short (min. 0 minute = DISABLE)
When the time is set to 0, the projector is not turned off automatically.
When the time is set to 1 to 99, and when the passed time with no-
signal or an unsuitable signal reaches at the set time, the projector 
lamp will be turned off. 
If one of the projector's buttons or the remote control...

44
OPTION menu
Item Description
MY BUTTONThis item is to assign one of the following functions to the MY 
BUTTON 1/2 on the remote control (
6).
(1)  Use the ▲/▼ cursor buttons on the MY BUTTON menu to select 
a MY BUTTON - (1/2) and press the ► cursor (or the ENTER) 
button to display the MY BUTTON setup dialog. 
(2)  Then using the ▲/▼/◄/► cursor buttons sets one of the 
following functions to the chosen button. Press the ENTER (or 
the INPUT) button to save the setting.
• COMPUTER IN1: Sets port to...

45
OPTION menu
Item Description
SERVICESelecting this item displays the SERVICE 
menu.
Select an item using the ▲/▼ cursor 
buttons, and press the ► cursor (or the 
ENTER) button on the remote control 
to execute the item.
FAN SPEED
Using the ▲/▼ cursor buttons switches the rotation speed of the 
cooling fans. The HIGH is the mode for use at highlands etc. Note 
that the projector is noisier when the HIGH is selected.
HIGH 
 NORMAL
AUTO ADJUST
Using the ▲/▼ cursor buttons to select one of the mode. When...

46
OPTION menu
Item Description
SERVICE
(continued)KEY LOCK
Using the ▲/▼ cursor buttons turns on/off the key lock feature. 
When the ON is selected, the buttons on the projector except the 
STANDBY/ON button are locked.
ON 
 OFF
• Please use this function to prevent tampering or accidental 
operation. This function does not have any effect on the remote 
control.
REMOTE FREQ.
(1)  Use the ▲/▼ cursor button to change the projector's remote 
sensor frequency setting (
4).
1:NORMAL 
 2:HIGH
(2)  Use...

47
SECURITY menu
This projector is equipped with security functions.
From the SECURITY menu, items shown in the table 
below can be performed.
To use SECURITY menu: User registration is required 
before using the security functions.
Enter the SECURITY menu
1.  Use the ▲/▼ cursor buttons on the SECURITY menu to select ENTER PASSWORD and press the 
► cursor (or the ENTER) button. The ENTER PASSWORD box will be displayed.  
2.  Use the ▲/▼/◄/► cursor buttons to enter the registered password. 
The factory...

48
SECURITY menu
Item Description
MyScreen 
PASSWORD
The MyScreen PASSWORD function can be used to prohibit access to the 
MyScreen function and prevent the currently registered MyScreen image 
from being overwritten.
1 Turning on the MyScreen PASSWORD
1-1  Use the ▲/▼ cursor buttons on the SECURITY 
menu to select MyScreen PASSWORD and 
press the ► cursor (or the ENTER) button to 
display the MyScreen PASSWORD on/off menu.
1-2  
Use the ▲/▼ cursor buttons on the MyScreen 
PASSWORD on/off menu to select...

49
SECURITY menu
Item Description
PIN LOCK
The PIN LOCK is a function which prevents the projector from being used 
unless a registered Code is input.
1 Turning on the PIN LOCK
1-1  Use the ▲/▼ cursor buttons on the SECURITY 
menu to select PIN LOCK and press the ► 
cursor (or the ENTER) button to display the PIN 
LOCK on/off menu.
1-2  Use the ▲/▼ cursor buttons on the PIN 
LOCK on/off menu to select ON and the 
Enter PIN Code box will be displayed. 
1-3  Input a 4 part PIN code using the 
▲/▼/◄/►cursor...

50
SECURITY menu
Item Description
TRANSITION 
DETECTOR
~Transition Detector alarm shown below might appear on
screen, if the projector has been moved or re-installed.
~ Transition Detector alarm might appear on screen, if the
MIRROR setting has been changed.
• To display the signal again, set this function to the OFF.
• After about 5 minutes of displaying the TRANSITION DETECTOR ON 
alarm, the lamp will turn off.
• Keystone adjustment feature has been prohibited as long as the Transition 
Detector...