Hitachi Cp-D10 Users Manual

31
INPUT menu
INPUT menu
From the INPUT menu, items shown in the table 
below can be performed.
Select an item using the ▲/▼ cursor buttons, and 
press the ► cursor (or the ENTER) button to execute 
the item. Then perform it according to the following 
table.
Item Description
PROGRESSIVEUsing the ▲/▼ cursor buttons switches the progress mode.
TV 
 FILM 
 OFF
  
• This function is performed only for a video signal, s-video signal or 
component video signal of 480i@60 or 576i@50.
• When the TV or the...

32
INPUT menu
Item Description
VIDEO FORMAT
The video format for the S-VIDEO port and the VIDEO port can be set.
(1)  Use the ▲/▼ cursor buttons 
to select the input port.
S-VIDEO 
 VIDEO
(2)  Using the ◄/► cursor 
buttons switches the mode 
for video format.
AUTO  
  NTSC  
  PAL  
  SECAM
      N-PAL 
 M-PAL 
 NTSC4.43 
• This item is performed only for a video signal from the VIDEO port 
or the S-VIDEO port.
• The AUTO mode automatically selects the optimum mode.
• The AUTO operation may not...

33
INPUT menu
Item Description
RESOLUTIONThe resolution for the COMPUTER IN1 and the COMPUTER IN2 
input signals can be set on this projector.
In the RESOLUTION menu select the resolution you wish to display 
using the ▲/▼ cursor buttons. 
■AUTO
  Selecting AUTO will set a resolution 
appropriate to the input signal.
■STANDARD
  Pressing the ► cursor (or the ENTER) button 
when selecting a STANDARD resolution 
will automatically adjust the horizontal and 
vertical positions, clock phase and horizontal...

34
SETUP menu
SETUP menu
From the SETUP menu, items shown in the table below 
can be performed.
Select an item using the ▲/▼ cursor buttons, and press 
the ► cursor (or the ENTER) buttonn to execute the item. 
Then perform it according to the following table.
Item Description
D-ZOOM
Using the ◄/► cursor buttons adjusts the magnification ratio.
Small 
 Large
• The on-screen menu might be displayed outside of the image display 
area depending on the adjustment value of the ASPECT, D-ZOOM 
and KEYSTONE....

35
SETUP menu
Item Description
MIRRORUsing the ▲/▼ cursor buttons switches the mode for mirror status.
NORMAL 
 H:INVERT 
 V:INVERT 
 H&V:INVERT
    
If the Transition Detector is on and the MIRROR status is changed, 
the TRANSITION DETECTOR ON alarm (
50) will be displayed 
when projector is restarted after the AC power is turned off.
STANDBY MODEUsing ▲/▼ cursor buttons switches the standby mode setting 
between the NORMAL and the SAVING. 
NORMAL 
 SAVING
When the SAVING is selected, the power...

36
AUDIO menu
AUDIO menu
From the AUDIO menu, items shown in the table 
below can be performed. Select an item using the 
▲/▼ cursor buttons, and press the ► cursor (or the 
ENTER) button to execute the item. Then perform it 
according to the following table.
Item Description
VOLUMEUsing the ◄/► cursor buttons adjusts the volume.
High 
 Low
SPEAKERUsing the ▲/▼ cursor buttons turns on/off the built-in speaker.
ON 
 OFF
When the OFF is selected, the built-in speaker does not work.
AUDIO SOURCEThe...

37
SCREEN menu
SCREEN menu
From the SCREEN menu, items shown in the table 
below can be performed.
Select an item using the ▲/▼ cursor buttons, and 
press the ► cursor (or the ENTER) button to execute 
the item. Then perform it according to the following 
table.
Item Description
LANGUAGEUsing the ▲/▼/◄/► cursor buttons switches the OSD (On Screen 
Display) language.
ENGLISH, FRANÇAIS, DEUTSCH, ESPAÑOL...  
(shown in the LANGUAGE dialog)
Press the ENTER (or the INPUT) button to save the language setting....

38
SCREEN menu
Item Description
MyScreenThis item allows you to capture an image for use as a MyScreen 
image which can be used as the BLANK screen and the START UP 
screen. Display the image you want to capture before executing the 
following procedure.
1.  Selecting this item displays a dialog 
titled “MyScreen”. It will ask you if 
you start capturing an image from 
the current screen.
Please wait for the target image to be displayed, and press the 
ENTER (or the INPUT) button when the image is...

39
SCREEN menu
Item Description
MyScreen LockUsing the ▲/▼ cursor buttons turns on/off the MyScreen lock 
function.
ON 
 OFF
When the ON is selected, the item MyScreen is locked. Use this 
function for protecting the current MyScreen.
• This function cannot be selected when the ON is selected to the 
MyScreen PASSWORD item in the SECURITY menu (
48).
MESSAGEUsing the ▲/▼ cursor buttons turns on/off the message function.
ON 
 OFF
When the ON is selected, the following message function works.
“AUTO IN...

40
SCREEN menu
Item Description
SOURCE NAMEEach input port for this projector can have a name applied to it.
(1)  
Use the ▲/▼ cursor buttons on the SCREEN menu to select the 
SOURCE NAME and press the ► cursor (or the ENTER) button.  
The SOURCE NAME menu will be displayed.
(2)  Use the ▲/▼ cursor buttons on the 
SOURCE NAME menu to select the port 
to be named and press the ► cursor 
button. Right side of the menu is blank 
until a name is specified. 
The SOURCE NAME dialog will be 
displayed.
(3)  The...