Hitachi Cp-D10 Users Manual

21
Operating
1.Press the BLANK button on the remote control.  
The BLANK screen will be displayed instead of the screen of 
input signal. Please refer to the BLANK item in the SCREEN 
menu (
37).
To exit from the BLANK screen and return to the input signal 
screen, press the BLANK button again. 
Temporarily blanking the screen
●  The projector automatically exits from the BLANK mode when 
some control buttons are pressed.
• The sound is not connected with the BLANK screen function. If 
necessary, set...

22
POWERTEMPLAMP MENU INPUT
STANDBY/ON
Operating
1.To start the MENU, press the MENU button. The MENU you last used (EASY 
or ADVANCED) will appear. The EASY MENU has priority to appear just after 
powered on.
Using the menu function
2.
(1)  Use the ▲/▼ cursor buttons to select an item to 
operate. If you want to change it to the ADVANCED 
MENU, select the ADVANCED MENU.
(2)  Use the ◄/► cursor buttons to operate the item. This projector has the following menus:  
PICTURE, IMAGE, INPUT, SETUP, AUDIO,...

23
Operating
Using the menu function (continued)
3.To close the MENU, press the MENU button again or select the EXIT and 
press the ◄ cursor (or the ENTER) button. Even if you do not do anything, 
the dialog will automatically disappear after about 30 seconds.
●  If you want to move the menu position, use the cursor buttons after pressing the 
POSITION button.
●  Some functions cannot be performed when a certain input port is selected, or 
when a certain input signal is displayed.
●  When you want to...

24
EASY MENU
EASY MENU
From the EASY MENU, items shown in the table 
below can be performed.
Select an item using the ▲/▼ cursor buttons. Then 
perform it according to the following table.
Item Description
ASPECT
Using the ◄/► cursor buttons switches the mode for aspect ratio.
See the ASPECT item in the IMAGE menu (
29).
• The on-screen menu might be displayed outside of the image 
display area depending on the adjustment value of the ASPECT, 
D-ZOOM and KEYSTONE. Changing the values of ASPECT, 
D-ZOOM...

25
EASY MENU
Item Description
ECO MODEUsing the ◄/► cursor buttons turns off/on the eco mode.
See the ECO MODE item in the SETUP menu (
34).
MIRRORUsing the ◄/► cursor buttons switches the mode for mirror status.
See the MIRROR item in the SETUP menu (
35).
RESETPerforming this item resets all of the EASY MENU items except the 
FILTER TIME and the LANGUAGE.
A dialog is displayed for confirmation. Selecting the OK using the ► 
cursor button performs resetting.
FILTER TIMEThe usage time of the air filter...

26
PICTURE menu
PICTURE menu
From the PICTURE menu, items shown in the table 
below can be performed. 
Select an item using the ▲/▼ cursor buttons, and 
press the ► cursor (or the ENTER) button to execute 
the item. Then perform it according to the following 
table.
Item Description
BRIGHTNESSUsing the 
◄/► cursor buttons adjusts the brightness.
Dark 
 Light
CONTRASTUsing the 
◄/► cursor buttons adjusts the contrast.
Weak 
 Strong
GAMMAUsing the ▲/▼ cursor buttons switches the gamma mode.
To adjust...

27
PICTURE menu
Item Description
COLOR TEMP
Using the ▲/▼ cursor buttons switches the color temperature mode.
To adjust CUSTOM
Selecting a mode whose name 
includes the CUSTOM and then 
pressing the ► cursor (or the ENTER) 
button displays a dialog to aid you in 
adjusting the OFFSET and GAIN of the 
selected mode.
The OFFSET adjustments change the color intensity on the whole 
tones of the test pattern.
GAIN adjustments mainly affect color intensity on the brighter tones 
of the test pattern.
Choose an...

28
PICTURE menu
Item Description
MY MEMORY
This projector has 4 memories for adjustment data (for all the items 
of the PICTURE menu).
Selecting a function using the ▲/▼ cursor buttons and pressing the 
► cursor (or the ENTER) button performs each function.
SAVE-1 
 SAVE-2 
 SAVE-3 
 SAVE-4
LOAD-4 
LOAD-3 
 LOAD-2 
 LOAD-1
SAVE-1, SAVE-2, SAVE-3, SAVE-4
Performing a SAVE function saves the current adjustment data into 
the memory linked in the number included in the function’s name. 
• Remember...

29
IMAGE menu
IMAGE menu
From the IMAGE menu, items shown in the table 
below can be performed.
Select an item using the ▲/▼ cursor buttons, and 
press the ► cursor (or the ENTER) button to execute 
the item. Then perform it according to the following 
table.
Item Description
ASPECTUsing the ▲/▼ cursor buttons switches the mode for aspect ratio. 
For a computer signal
NORMAL 
 4:3 
 16:9 
 16:10 

 NATIVE
          
For a video signal, s-video signal or component video signal
4:3 
 16:9 
 16:10 
...

30
IMAGE menu
Item Description
H PHASEUsing the ◄/► cursor buttons adjusts the horizontal phase to 
eliminate flicker.
Right 
 Left
• This item can be selected only for a computer signal or a 
component video signal.
H SIZEUsing the ◄/► cursor buttons adjusts the horizontal size.
Small 
 Large
• This item can be selected only for a computer signal.
• When this adjustment is excessive, the picture may not be 
displayed correctly. In such a case, please reset the adjustment 
by pressing the RESET button...