Hitachi Cp-D10 Users Manual

							41
SCREEN menu
Item Description
C.C.
(Closed Caption)The C.C. is the function that displays a 
transcript or dialog of the audio portion of 
a video, files or other presentation or other 
relevant sounds. It is required to have NTSC 
format video or 480i@60 format component 
video source supporting C.C. feature to 
utilize this function.
It may not work properly, depending on equipment or signal source. 
In this case, please turn off the Closed Caption.
DISPLAY
Select the Closed Caption DISPLAY setting from following options 
using the ▲/▼ cursor buttons.
AUTO 
 ON 
 OFF 
   
AUTO :  Closed Caption automatically displays when the volume 
is muted.
ON : The Closed Caption is on.
OFF : The Closed Caption is off.
• The caption is not displayed when the OSD menu is active.
• The Closed Caption is the function to display the dialogue, 
narration, and / or sound effects of a television program or other 
video sources. The Closed Caption availability is depending upon 
broadcaster and/or content.
MODE
Select the Closed Caption MODE setting from following options 
using the ▲/▼ cursor buttons.
CAPTIONS 
 TEXT
CAPTIONS : Display Closed Caption.
TEXT :  Display Text data, which is for additional information such 
as news reports or a TV program guide. The information 
covers the entire screen. Not all of the C.C. program has 
Text information.
CHANNEL
Select the Closed Caption CHANNEL from following options using 
the ▲/▼ cursor buttons.
1 
 2 
 3 
 4
1: Channel 1, primary channel / language
2: Channel 2
3: Channel 3
4: Channel 4
The channel data may vary, depending on the content. Some 
channel might be used for secondary language or empty. 
						

							42
OPTION menu
OPTION menu
From the OPTION menu, items shown in the table 
below can be performed.
Select an item using the ▲/▼ cursor buttons, 
and press the ► cursor (or the ENTER) button to 
execute the item, except for the items LAMP TIME 
and FILTER TIME. Then perform it according to the 
following table.
Item Description
AUTO SEARCHUsing the ▲/▼ cursor buttons turns on/off the automatic signal 
search function.
ON 
 OFF
When the ON is selected, detecting no signal automatically cycles 
through input ports in the following order. The search is started from 
the current port. Then when an input is found, the projector will stop 
searching and display the image. 
  COMPUTER IN1 
 COMPUTER IN2 
  VIDEO  
  S-VIDEO 
DIRECT
POWER ONUsing the ▲/▼ cursor buttons turns on/off the 
DIRECT POWER 
ON 
function.
ON 
 OFF
When set to the ON, the lamp in projector will be automatically 
turned on without the usual procedure (
14), only when the 
projector is supplied with the power after the power was cut while 
the lamp was on.
• This function does not work as long as the power has been 
supplied to the projector while the lamp is off.
• 
After turning the lamp on by the DIRECT POWER ON function, 
if neither input nor operation is detected for about 30 minutes, the 
projector is turned off, even though the
 AUTO POWER OFF function 
(
43) is disabled.
(continued on next page) 
						

							43
OPTION menu
Item Description
AUTO
POWER OFF
Using the ▲/▼ cursor buttons adjusts the time to count down to 
automatically turn the projector off.
Long (max. 99 minutes) 
 Short (min. 0 minute = DISABLE)
When the time is set to 0, the projector is not turned off automatically.
When the time is set to 1 to 99, and when the passed time with no-
signal or an unsuitable signal reaches at the set time, the projector 
lamp will be turned off. 
If one of the projector's buttons or the remote control buttons 
is pressed or one of the commands (except get commands) is 
transmitted to the CONTROL port during the corresponding time, 
projector will not be turned off.
Please refer to the section the “Turning off the power”
 (14).
LAMP TIMEThe lamp time is the usage time of the lamp, counted after the last 
resetting. It is shown in the OPTION menu.
Pressing the ► cursor (or the ENTER / the RESET) button displays 
a dialog. 
To reset the lamp time, select the OK using the ► cursor button.
CANCEL
 
 OK
• Please reset the lamp time only when you have replaced the lamp, 
for a suitable indication about the lamp.
• For the lamp replacement, see the section the “Replacing the 
lamp” (
53, 54).
FILTER TIMEThe filter time is the usage time of the air filter, counted after the last 
resetting. It is shown in the OPTION menu.
Pressing the ► cursor (or the ENTER / the RESET) button displays 
a dialog. 
To reset the filter time, select the OK using the ► cursor button.
CANCEL
 
 OK
• 
Please reset the filter time only when you have cleaned or replaced 
the air filter, for a suitable indication about the air filter.
• For the air filter cleaning, see the section the “Cleaning and 
replacing the air filter” (
55).
(continued on next page) 
						

							44
OPTION menu
Item Description
MY BUTTONThis item is to assign one of the following functions to the MY 
BUTTON 1/2 on the remote control (
6).
(1)  Use the ▲/▼ cursor buttons on the MY BUTTON menu to select 
a MY BUTTON - (1/2) and press the ► cursor (or the ENTER) 
button to display the MY BUTTON setup dialog. 
(2)  Then using the ▲/▼/◄/► cursor buttons sets one of the 
following functions to the chosen button. Press the ENTER (or 
the INPUT) button to save the setting.
• COMPUTER IN1: Sets port to the COMPUTER IN1.
• COMPUTER IN2: Sets port to the COMPUTER IN2.
• S-VIDEO: Sets port to the S-VIDEO.
• VIDEO: Sets port to the VIDEO.
•  INFORMATION: Displays the INPUT_INFORMATION (
46) or 
the SYSTEM_INFORMATION or nothing.
•  MY MEMORY: Loads one of adjustment data stored (
28). 
When more than one data are saved, the adjustment  
changes every time the MY BUTTON is pressed.
When no data is saved in memory, the 
dialog "No saved data" appears.
When the current adjustment is not 
saved to memory, the dialog as shown in 
the right appears.
If you want to keep the current adjustment, please press  
the ► cursor button to exit. Otherwise loading a data will overwrite 
the current adjusted condition.
• PICTURE MODE: Changes the PICTURE MODE (
24).
•  FILTER RESET: Displays the filter time reset confirmation dialogue 
(
43).
•  TEMPLATE: Makes the template pattern selected to the 
TEMPLATE item (
40) appear or disappear.
•  AV MUTE: Turns the picture and audio on/off.
•  D-ZOOM: Turns the D-ZOOM mode on/off. When the D-ZOOM 
mode is on, use the ▲/▼ cursor buttons to adjust the 
magnification ratio.
•  D-SHIFT: Turns the D-SHIFT mode on/off. When the D-SHIFT 
mode is on, use the ▲/▼/◄/► cursor buttons to move the 
magnifying area.
•  RESOLUTION: Turns the RESOLUTION menu on/off (
33).
MY SOURCE
Using the ▲/▼ cursor buttons selects the picture input port to be 
selected with pressing the MY SOURCE/DOC.CAMERA button on 
the remote control.
Select the picture input that is connected with a document camera.
  COMPUTER IN1 
 COMPUTER IN2 
  VIDEO  
  S-VIDEO   
(continued on next page) 
						

							45
OPTION menu
Item Description
SERVICESelecting this item displays the SERVICE 
menu.
Select an item using the ▲/▼ cursor 
buttons, and press the ► cursor (or the 
ENTER) button on the remote control 
to execute the item.
FAN SPEED
Using the ▲/▼ cursor buttons switches the rotation speed of the 
cooling fans. The HIGH is the mode for use at highlands etc. Note 
that the projector is noisier when the HIGH is selected.
HIGH 
 NORMAL
AUTO ADJUST
Using the ▲/▼ cursor buttons to select one of the mode. When the 
DISABLE is selected, the automatic adjustment feature is disabled.
FINE 
 FAST 
 DISABLE
   
FINE: Finer tuning including the H.SIZE adjustment.
FAST:  Faster tuning, setting the H.SIZE to prearranged data for 
the input signal.
• Depending on conditions, such as input image, signal cable to 
the projector, environment around the projector, etc., the automatic 
adjustment may not work correctly.  In such a case, please choose 
the DISABLE to disable the automatic adjustment, and make 
adjustment manually.
GHOST
1.  Select a color element of ghost using 
the ◄/► cursor buttons. 
2.  Adjust the selected element using the 
▲/▼ cursor buttons to disappear ghost.
FILTER MESSAGE
Use the ▲/▼ cursor button to set the timer for notifying by the 
message when to replace the filter unit 
500h 
 1000h 
 2000h 
 3000h 
 4000h 
 5000h 
 OFF
After choosing an item except the OFF, the message the 
“REMINDER ***HRS PASSED .....” will appear after the timer 
reaches the interval time set by this feature (
58). 
When the OFF is chosen, the message will not appear. Utilize 
this feature to keep the air filter clean, setting the suitable time 
according to your environment of this projector.
• Please take care of the filter unit periodically, even if there is 
no message. If the air filter becomes to be blocked by dust or 
other matter, the internal temperature will rise, which could cause 
malfunction, or reduce the lifetime of the projector.
• Please be careful with the operating environment of the projector 
and the condition of the filter unit.
(continued on next page) 
						

							46
OPTION menu
Item Description
SERVICE
(continued)KEY LOCK
Using the ▲/▼ cursor buttons turns on/off the key lock feature. 
When the ON is selected, the buttons on the projector except the 
STANDBY/ON button are locked.
ON 
 OFF
• Please use this function to prevent tampering or accidental 
operation. This function does not have any effect on the remote 
control.
REMOTE FREQ.
(1)  Use the ▲/▼ cursor button to change the projector's remote 
sensor frequency setting (
4).
1:NORMAL 
 2:HIGH
(2)  Use the ◄/► cursor button to change 
the projector's remote sensor on or off.
ON 
 OFF
The factory default setting is for both 1:NORMAL and 2:HIGH to be 
on. If the remote control does not function correctly, disable either 
of them (
13).
It’s not possible to disable both options at the same time.
INFORMATION
Selecting this item displays a dialog titled “INPUT_INFORMATION”. 
It shows the information about the current input.
• The “FRAME LOCK” message on the dialog means the frame lock 
function is working. 
• This item can't be selected for no signal and sync out.
• When the MY TEXT DISPLAY is set to ON, the MY TEXT is 
displayed together with the input information in the INPUT_
INFORMATION box (
52).
FACTORY RESET
Selecting the OK using the ► cursor button performs this function. 
By this function, all the items in all of menus will collectively return 
to the initial setting. Note that the items LAMP TIME, FILTER TIME, 
LANGUAGE, FILTER MESSAGE and SECURITY settings are not 
reset.
CANCEL
 
 OK 
						

							47
SECURITY menu
This projector is equipped with security functions.
From the SECURITY menu, items shown in the table 
below can be performed.
To use SECURITY menu: User registration is required 
before using the security functions.
Enter the SECURITY menu
1.  Use the ▲/▼ cursor buttons on the SECURITY menu to select ENTER PASSWORD and press the 
► cursor (or the ENTER) button. The ENTER PASSWORD box will be displayed.  
2.  Use the ▲/▼/◄/► cursor buttons to enter the registered password. 
The factory default password is 5010. This password can be 
changed (
 below). Move the cursor to the right side of the 
ENTER PASSWORD box and press the ► cursor (or the ENTER) 
button to display the SECURITY menu.
• It is strongly recommended the factory default password to be 
changed as soon as possible.
• If an incorrect password is input, the ENTER PASSWORD box 
will be displayed again. If incorrect password is input 3 times, the 
projector will turn off. Afterwards the projector will turn off every time 
an incorrect password is input.
3.  Items shown in the table below can be performed.
If you have forgotten your password
(1)  While the ENTER PASSWORD box is displayed, press and hold the 
RESET (or press the ◄ cursor and the INPUT buttons at the same 
time) button for about 3 seconds.
(2)  The 10 digit Inquiring Code will be displayed. Contact your dealer 
with the 10 digit Inquiring Code. Your password will be sent after 
your user registration information is confirmed.
• If there is no key input for about 55 seconds while the Inquiring Code is displayed, the menu will 
close. If necessary, repeat the process from (1).  
Item Description
SECURITY 
PASSWORD 
CHANGE
(1)  Use the ▲/▼ cursor buttons on the 
SECURITY menu to select SECURITY 
PASSWORD CHANGE and press the ► 
cursor (or the ENTER) button to display the 
ENTER NEW PASSWORD box.
(2)  Use the ▲/▼/◄/► cursor buttons to enter the new password.
(3)  Move the cursor to the right side of the 
ENTER NEW PASSWORD box and press the 
► cursor (or the ENTER) button to display 
the NEW PASSWORD AGAIN box, enter the 
same password again. 
(4)  
Move the cursor to the right side of the NEW 
PASSWORD AGAIN box and press the ► 
cursor 
(or the ENTER) button and the NOTE 
NEW PASSWORD box will be displayed for 
about 30 seconds, please make note of the 
password during this time.
Pressing the ► cursor (or the ENTER) button will close the NOTE NEW 
PASSWORD box.
• Please do not forget your password.
SECURITY menu
(continued on next page) 
						

							48
SECURITY menu
Item Description
MyScreen 
PASSWORD
The MyScreen PASSWORD function can be used to prohibit access to the 
MyScreen function and prevent the currently registered MyScreen image 
from being overwritten.
1 Turning on the MyScreen PASSWORD
1-1  Use the ▲/▼ cursor buttons on the SECURITY 
menu to select MyScreen PASSWORD and 
press the ► cursor (or the ENTER) button to 
display the MyScreen PASSWORD on/off menu.
1-2  
Use the ▲/▼ cursor buttons on the MyScreen 
PASSWORD on/off menu to select ON. 
The ENTER NEW PASSWORD box (small) 
will be displayed.
1-3  Use the ▲/▼/◄/► cursor buttons to enter 
the password. Move the cursor to the right 
side of the ENTER NEW PASSWORD 
box (small) and press the ► cursor (or 
the ENTER) button to display the NEW 
PASSWORD AGAIN box, enter the same 
PASSWORD again.
1-4  Move the cursor to the right side of the NEW 
PASSWORD AGAIN box and press the ► 
cursor (or the ENTER) button to display the 
NOTE NEW PASSWORD box for about 30 
seconds, please make note of the password 
during this time. 
Pressing the ► cursor (or the ENTER) button will return to the MyScreen 
PASSWORD on/off menu.
When a password is set for the MyScreen:
• The MyScreen registration function (and menu) will be unavailable.
• The MyScreen Lock menu will be unavailable.
• The START UP setting will be locked on MyScreen (and the menu will be 
unavailable).
Turning the MyScreen PASSWORD off will allow normal operation of these 
functions.
• Please do not forget your MyScreen PASSWORD.
2 Turning off the MyScreen PASSWORD
2-1  Follow the procedure in 1-1 to display the MyScreen PASSWORD on/off 
menu.
2-2 
  Select the OFF to display the ENTER 
PASSWORD box (large). Enter the registered 
password and the screen will return to the 
MyScreen PASSWORD on/off menu.
If an incorrect PASSWORD is input, the menu will 
close. If necessary, repeat the process from 2-1.
3 If you have forgotten your password
3-1  Follow the procedure in 1-1 to display the MyScreen PASSWORD on/off 
menu.
3-2  Select the OFF to display the ENTER PASSWORD box (large). The 10 
digit Inquiring Code will be displayed inside the box.
3-3  Contact your dealer with the 10 digit Inquiring Code. Your password will 
be sent after your user registration information is confirmed.
ENTER NEW PASSWORD 
box (small)
(continued on next page)
ENTER PASSWORD box 
(large) 
						

							49
SECURITY menu
Item Description
PIN LOCK
The PIN LOCK is a function which prevents the projector from being used 
unless a registered Code is input.
1 Turning on the PIN LOCK
1-1  Use the ▲/▼ cursor buttons on the SECURITY 
menu to select PIN LOCK and press the ► 
cursor (or the ENTER) button to display the PIN 
LOCK on/off menu.
1-2  Use the ▲/▼ cursor buttons on the PIN 
LOCK on/off menu to select ON and the 
Enter PIN Code box will be displayed. 
1-3  Input a 4 part PIN code using the 
▲/▼/◄/►cursor and the COMPUTER (or the 
INPUT) button. 
The PIN Code again box will appear. Reenter 
the same PIN code. This will complete the PIN 
code registration.
• If there is no key input for about 55 seconds  
while the Enter PIN Code box or the PIN Code again box is displayed, 
the menu will close. If necessary, repeat the process from 1-1.
Afterwards, anytime the projector is restarted after AC power  is turned off 
the Enter PIN Code box will be displayed. Enter the registered the PIN code.
The projector can be used after entering the registered the PIN code. If an 
incorrect PIN code is input, the Enter PIN code box will be displayed again.
If an incorrect PIN Code is input 3 times, the projector will turn off. 
Afterwards the projector will turn off every time an incorrect PIN code is 
input. The projector will also turn off if there is no key input for about 5 
minutes while the Enter PIN code box is displayed.
This function will activate only when the projector is started after AC power 
is turned off.
• Please do not forget your PIN code.
2 Turning off the PIN LOCK
2-1  Follow the procedure in 1-1 to display the PIN LOCK on/off menu. 
2-2  Use the ▲/▼ cursor buttons to select the OFF and the Enter PIN Code 
box will be displayed. 
Enter the registered the PIN code to turn the PIN LOCK function off.
If an incorrect the PIN Code is input 3 times, the menu will close.
3 If you have forgotten your PIN Code
3-1  While the Enter PIN Code box is displayed, press and hold the RESET (or 
press the ◄ cursor and the INPUT buttons at the same time) button for 
3 seconds. 
The 10 digit Inquiring Code will be displayed.
• If there is no key input for about 5 minutes 
while the Inquiring Code is displayed, the 
projector will turn off.
3-2  Contact your dealer with the 10 digit Inquiring Code. Your PIN Code will 
be sent after your user registration information is confirmed.
(continued on next page) 
						

							50
SECURITY menu
Item Description
TRANSITION 
DETECTOR
~Transition Detector alarm shown below might appear on
screen, if the projector has been moved or re-installed.
~ Transition Detector alarm might appear on screen, if the
MIRROR setting has been changed.
• To display the signal again, set this function to the OFF.
• After about 5 minutes of displaying the TRANSITION DETECTOR ON 
alarm, the lamp will turn off.
• Keystone adjustment feature has been prohibited as long as the Transition 
Detector function is on.
1 Turning on the TRANSITION DETECTOR
1-1   Use the ▲/▼ cursor buttons on the SECURITY 
menu to select the TRANSITION DETECTOR 
and press the ► cursor (or the ENTER) button to 
display the TRANSITION DETECTOR on/off menu.
1-2  Use the ▲/▼ cursor buttons on the 
TRANSITION DETECTOR on/off menu 
to select 
the ON. Select the ON and the 
current angle and 
the MIRROR setting will 
be recorded. The ENTER NEW PASSWORD 
box (small) will be displayed.
1-3  Use the ▲/▼/◄/► cursor buttons to enter a 
password. Move the cursor to the right side 
of the ENTER NEW PASSWORD box (small) 
and press the ► cursor (or the ENTER) 
button to display the NEW PASSWORD 
AGAIN box, enter the same password again.
1-4  Move the cursor to the right side of the NEW 
PASSWORD AGAIN box and press the ► 
cursor (or the ENTER) button to display the 
NOTE NEW PASSWORD box for about 30 
seconds, please make note of the password 
during this time.
Pressing the ► cursor (or the ENTER) button will return to the TRANSITION 
DETECTOR on/off menu.
• Please do not forget your TRANSITION DETECTOR password.
• 
This function will activate only when the projector is started after turning off the AC power.
• This feature may not function properly if the projector is not in a stable 
position when the ON is selected.
2 Turning off the TRANSITION DETECTOR
2-1  Follow the procedure in 1-1 to display the TRANSITION DETECTOR on/off menu.
2-2  Select the OFF to display the ENTER 
PASSWORD box (large). Enter the registered 
password and the screen will return to the 
TRANSITION DETECTOR on/off menu.
If an incorrect password is input, the menu will 
close. If necessary, repeat the process from 2-1.
3 If you have forgotten your password
3-1  Follow the procedure in 1-1 to display the TRANSITION DETECTOR on/off menu.
3-2  Select the OFF to display the ENTER PASSWORD box (large). The 10 
digit Inquiring Code will be displayed inside the box.
3-3  Contact your dealer with the 10 digit Inquiring Code. Your password will 
be sent after your user registration information is confirmed.
(continued on next page)
ENTER NEW PASSWORD 
box (small)
ENTER PASSWORD box 
(large)